Suzuki Reno Oxygen Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(16)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(16)

Oxygen Sensor Replacement Service

How much does a Oxygen Sensor Replacement cost?

On average, the cost for a Suzuki Reno Oxygen Sensor Replacement is $205 with $110 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Suzuki RenoL4-2.0LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$459.05Shop/Dealer Price$555.07 - $820.61
2006 Suzuki RenoL4-2.0LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$439.05Shop/Dealer Price$535.08 - $800.64
2006 Suzuki RenoL4-2.0LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$550.65Shop/Dealer Price$674.58 - $1023.84
2007 Suzuki RenoL4-2.0LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$439.05Shop/Dealer Price$535.06 - $800.60
2008 Suzuki RenoL4-2.0LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$550.65Shop/Dealer Price$674.60 - $1023.87
2005 Suzuki RenoL4-2.0LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$315.75Shop/Dealer Price$380.96 - $554.04
2007 Suzuki RenoL4-2.0LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$555.65Shop/Dealer Price$679.45 - $1028.60
2005 Suzuki RenoL4-2.0LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$731.75Shop/Dealer Price$899.94 - $1381.46
Show example Suzuki Reno Oxygen Sensor Replacement prices

What is the Oxygen Sensor all about?

With each new model year, manufacturers are adding more oxygen sensors to better manage engine operation. Some high performance engines have an oxygen sensor for each cylinder as well as one for the rear of each catalytic convertor. The sensors are located either underneath the hood or underneath the car. The oxygen sensors are connected (screwed) to the exhaust pipe, either in front or back of the catalytic converter. The front (upstream) sensors measure the amount of oxygen in the exhaust system. The purpose of the front oxygen sensor(s) is to measure how rich or lean the gases are as the gases exit the combustion chamber. Depending upon whether the exhaust gas is lean (high in oxygen content) or rich (low in oxygen content), the amount of fuel entering the engine is adjusted by the engine management computer to try and maintain an ideal mixture that produces the lowest emissions output from the catalytic convertor.

Rear (downstream) sensors are located behind the catalytic converter. The purpose of the rear oxygen sensor(s) is to monitor the oxygen content of the exhaust gases leaving the catalytic convertor.

If one or more of the oxygen sensors are faulty, your car may not pass the emissions test. If you drive your car with a faulty oxygen sensor, you may get poor gas mileage and it can damage the catalytic converter.

Oxygen Sensor-MATROX-1

When replacing the oxygen sensor remember:

  • Many oxygen sensors are damaged by leaking oil or coolant. If that is the case, the cause of that leak needs to be identified and repaired, or else the replacement oxygen sensor will be damaged as well.
  • New vehicles require specific oxygen sensors, and not the universal sensors that were common prior to 1996.

How it's done:

  • Scan the computer in the car for codes.
  • Inspect for vacuum leaks and holes in the exhaust system.
  • Remove and replace the oxygen sensor if it is bad.
  • Check electrical connections.
  • Check for proper operation of oxygen sensors.
  • Clear diagnostic codes.
  • Test drive car.

Our recommendation:

Keep up with the tune-ups. If check engine light is on, don't drive the car too long without getting it inspected. If check engine light is flashing, pull over and get the car towed to avoid costly repairs. Ask the mechanic to inspect the vacuum hoses and leaks in the exhaust system. If the vacuum hose or exhaust system is leaking, it will display an oxygen sensor fault code. Replacing an oxygen sensor may not fix the problem.

What common symptoms indicate you may need to replace the Oxygen Sensor?

  • Check Engine light is on.
  • Car is getting poor gas mileage.
  • Emission test fails.

How important is replacing the oxygen sensor?

Your vehicle has multiple oxygen sensors, and they all help the car run optimally. The front sensors measure how much oxygen is in the exhaust stream to measure how rich or lean the gases leaving the gas chamber are. The rear sensors measure the oxygen content of the gases as they leave the catalytic converter. The oxygen sensors then relay this information to your vehicle’s electronic control unit, so that it can adjust as necessary. Because cars depend on an ideal fuel-to-air ratio to function optimally, the oxygen sensors are leaned on for engine performance. When your oxygen sensors fail your car will run less smoothly, get worse mileage, and have worse emissions.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(16)

Rating Summary
16
0
0
0
0
16
0
0
0
0

Breck

20 years of experience
681 reviews
Breck
20 years of experience
Suzuki Reno L4-2.0L - Fuel Injector - Houston, Texas
Very professional

Johnnie

29 years of experience
35 reviews
Johnnie
29 years of experience
Suzuki Reno L4-2.0L - Oil Change - Clayton, North Carolina
Very helpful, and even pointed brought things to my attention that will need to be fixed in the near future. I plan to do further business with Mr. Johnnie.

Jeff

33 years of experience
441 reviews
Jeff
33 years of experience
Suzuki Reno L4-2.0L - Valve Cover Gasket - Sacramento, California
Jeff is a very knowledgeable mechanic that we can trust... Thanks Jeff !!! Always John and Diana

Cameron

14 years of experience
95 reviews
Cameron
14 years of experience
Suzuki Reno L4-2.0L - Control Arm Assembly Replacement (Front Lower Right) - Lakewood, Washington
He was early, went above and beyond, and he was extremely knowledgeable. I felt so bad he worked in the pouring rain uncovered, and after my first time meeting him I knew I could trust him, I left him my keys and the car part over night, he was again early the next day to finish up while I was at work. He's a professional, and an honest mechanic.

Excellent Rating

(16)

Rating Summary
16
0
0
0
0
16
0
0
0
0
Number of Suzuki Reno services completed
176+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Faulty Knock Sensor?
Symptoms of a bad or failing engine knock sensor include slow acceleration, reduced fuel economy, and the Check Engine Light turning on.
How Long Does an EGR Pressure Feedback Sensor Last?
In In today's world people are more aware of exhaust gases than ever before. With that said measures have been built into modern vehicles that are meant to cut down on the emissions released into the air. Built into your...
How to Replace an Exhaust Gas Recirculation (EGR) Pressure Feedback Sensor
Exhaust gas recirculation (EGR) systems use a pressure feedback sensor to tell the powertrain control module (PCM) how much exhaust gas is flowing.

Car starts but immediately quits

If you have replaced all of those components and you're still getting issues then the problem should be in the fuse box (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuse-box) with the body control module fuse located in it (on the driver side) or there is an...

How to resolve the vvt sensor/camshaft position sensor circuit range. Having performance problem with my Toyota Vitz.

Hi there. Sounds like the variable valve timing sensor (VVT) is not functioning correctly. Check the wiring harness to the VVT and make sure that its connected. If the harness is good, then remove the harness and remove the VVT...

Porsche Cayenne S 2005 has code P0349 read on scanner.

Hi there. The Camshaft Position Sensor tone ring could be damaged or there could be an electrical problem with the electrical circuit with the camshaft position sensor harness. I recommend replacing the camshaft position sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement). If you need further...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com