Ram 3500 Grease on inner edge of tires Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(37)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(37)

Grease on inner edge of tires Inspection Service

How much does a Grease on inner edge of tires Inspection cost?

On average, the cost for a Ram 3500 Grease on inner edge of tires Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Ram 3500V8-6.4LService typeGrease on inner edge of tires InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2021 Ram 3500L6-6.7L Turbo DieselService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2012 Ram 3500V8-5.7LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Ram 3500L6-6.7L Turbo DieselService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2011 Ram 3500V8-5.7LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2020 Ram 3500L6-6.7L Turbo DieselService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2018 Ram 3500L6-6.7L Turbo DieselService typeGrease on inner edge of tires InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2016 Ram 3500V8-6.4LService typeGrease on inner edge of tires InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ram 3500 Grease on inner edge of tires Inspection prices

Grease is an important protectant for many parts of your car. While it isn’t used in your engine, it is used in several other areas, including the CV joints on your axles, as well as the grease fittings on your suspension (many newer cars have sealed fittings that aren’t serviceable today). It’s also used in rear-wheel drive applications – a truck’s driveshaft may have one or even two grease fittings. However, if you’re noticing grease on the inner edge of your tires, it means that something has potentially gone wrong.

How this system works:

There are a couple of places that grease on the inner edge of your tires might have come from. The most likely is from the CV joint. CV axles, or constant velocity axles, are used in front-wheel drive cars to connect the wheel hubs to the transmission. They have two joints, one close to either end. The joints are made to be flexible, so that your car can travel over bumps and dips easily without losing traction.

The joints are flexible, and include moving parts. To protect them from damage from dust, debris and other threats, they’re covered by rubber “boots” filled with grease. This ensures that they’re constantly lubricated, and that dust and debris cannot enter and damage the joints.

However, over time, your boots wear. The rubber can become brittle from age, and can crack. Boots can also be torn through impact with debris in the road and more. When this happens, the grease can leak out, and dirt and debris can enter the joint.

Common reasons for this to happen:

  • Blown CV Boot: If you’ve noticed grease on the inner edge of your tires, there’s a chance that one of your CV boots has blown and is leaking grease out. This is a serious situation. Without grease, the joint is not properly lubricated. Even more worrying, dirt and debris can enter the CV joint and cause serious damage, requiring the entire joint to be replaced. If the situation is caught early, it’s possible that only the boot will need to be replaced.

  • Damaged Grease Fitting: Some vehicles have grease fittings on their suspension system that enable moving parts to move more easily with lubrication. If one of these is damaged, it’s possible that some of the grease may leak onto the edge of your wheel from a nearby grease fitting.

  • Recent Lubrication of Grease Fittings: Once upon a time, an “oil and lube” service really lived up to its name, with all of a car’s grease fittings being lubricated during normal maintenance. With most newer cars now having sealed systems, this has become less common. However, if your car has serviceable fittings, it’s possible that grease from a recent service somehow ended up on the inner edge of the tire.

  • Recent CV Boot or Axle Replacement: If you’ve already had a CV boot blow out and the axle has been rebooted, or a new CV axle has been installed, it’s possible that the mechanic did not clean off the inner edge of the tire after the repair.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the CV axles, boots, grease fittings and more. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your CV axles and boots, as well as any grease fittings on your front suspension in order to determine the source of the grease on the inner edge of your tires. The mechanic may also need to test drive the vehicle to test for symptoms of a failed CV joint, which include clicking during turning, or a vibration while driving.

How important is this service?

If the problem is with your CV boots, having the situation corrected is critical. While it’s possible to reboot a CV axle before the boot blows entirely, or immediately afterward, any use of the vehicle with the boot blown can contaminate the CV joint with dust and dirt. This will eat into the joint itself, causing irreparable damage and requiring the entire axle to be replaced. If you’ve noticed grease on the inner edge of your tires, one of our professional mechanics can diagnose and repair the condition.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(37)

Rating Summary
36
1
0
0
0
36
1
0
0
0

Lee

38 years of experience
218 reviews
Lee
38 years of experience
Ram 3500 L6-6.7L Turbo Diesel - Brake Pads Replacement (Rear) - Oklahoma City, Oklahoma
Great mechanic and good people. This guy knows his stuff and has decades of experience. I cannot recommend him or this service more highly!

Eduardo

19 years of experience
553 reviews
Eduardo
19 years of experience
Ram 3500 L6-6.7L Turbo Diesel - Brake Pads Replacement (Front, Rear) - Pearland, Texas
He was quick and nice. Finally someone who can work on my truck. Thanks

Fred

17 years of experience
389 reviews
Fred
17 years of experience
Ram 3500 L6-6.7L Turbo Diesel - Shock Absorber Replacement (Front) - Spring, Texas
Perfect as always

Fred

17 years of experience
389 reviews
Fred
17 years of experience
Ram 3500 L6-6.7L Turbo Diesel - Ball Joint Front Replacement (Upper Left) - Spring, Texas
Aweaome as usual.

Excellent Rating

(37)

Rating Summary
36
1
0
0
0
36
1
0
0
0
Number of Ram 3500 services completed
407+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

How Long Does a Heater Control Valve Last?
Keeping Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements of the coolant system can lead to a...
P0325 OBD-II Trouble Code: Knock Sensor Malfunction (Sensor 1, Bank 1)
P0325 code definition Knock Sensor Malfunction (Sensor 1, Bank 1) What the P0325 code means P0325 is a general ODB2 diagnostic trouble...
How To Fix Common Electric Window Issues
Sometimes, Sometimes, your car needs fixes that are more about convenience than anything else, and this is true in the case of a broken component (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-power-window-switch) in a window. If your window is stuck down, you can sometimes help it...

Should I change my rotors?

Without seeing the vehicle, it would be hard to say if it would be safe. However, if the rotors are still of a usable thickness, it is possible to do what is referred to as a "pad slap", which means...

Dim dashboard lights..slower electrical functions

Hi there. In order to give you the best information I would need to know what kind of vehicle this is. From what you are explaining though it does sound like there is an issue with the electrical system. These...

Hazard lights stay on when car is turned off.

Hi There, Generally this is something caused by the flasher relay (https://www.yourmechanic.com/services/hazard-turn-signal-flasher-replacement) going bad. This is a small relay that allows the lights to flash based upon current flow and a resistor inside that causes them to flash. When this...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com