Pontiac Vibe Car starts and then dies Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(179)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(179)

Car starts and then dies Inspection Service

How much does a Car starts and then dies Inspection cost?

On average, the cost for a Pontiac Vibe Car starts and then dies Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Pontiac VibeL4-1.8LService typeCar starts and then dies InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2006 Pontiac VibeL4-1.8LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2010 Pontiac VibeL4-2.4LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2004 Pontiac VibeL4-1.8LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2009 Pontiac VibeL4-2.4LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2010 Pontiac VibeL4-1.8LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2008 Pontiac VibeL4-1.8LService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2003 Pontiac VibeL4-1.8LService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Pontiac Vibe Car starts and then dies Inspection prices

Starting a vehicle only to have it quit immediately after can be confusing and annoying for many drivers especially if their vehicle has not experienced this type of issue before. Typically, a vehicle will start and then quit because of an issue with the fuel or electrical system. It is important to monitor fuel levels as well as warning lights which can signal to the driver that a vehicle may quit unexpectedly.

How this system works:

To start a vehicle, the electrical system, composed of the battery and starter, turns the engine over. Once running, the engine requires a constant flow of gasoline and good spark to keep that fuel igniting. If gasoline is not readily available, or if there is not enough spark, the engine will quit. More modern vehicles with sophisticated computers may affect the way the vehicle runs. These computers help the car run efficiently but can also shut a car down if the fuel/air mixture is not correct. While an older vehicle may be less sophisticated and easier to diagnose, the computers on modern cars can provide more specific information when connected to a code scanner/reader.

Common reasons for this to happen:

  • Mass Airflow Sensor: The mass airflow sensor measures how much air is entering the engine and relays this information to the vehicle’s computer so that the right amount of fuel can be delivered from the fuel injectors. When a sensor begins to fail, the vehicle’s computer may generate an error code to indicate that something has gone wrong. An issue with the mass airflow sensor may manifest itself when a car starts and then stalls soon after starting.

  • Fuel Pump Relay: The fuel pump relay functions much like a fuse for an electric fuel pump. The fuel pump relay engages as the vehicle is started and starts the fuel pump. While the vehicle is running, the fuel pump relay turns off and the fuel pump is powered by the oil pressure sending unit. If the vehicle’s computer is unable to keep the fuel pump relay running throughout the starting process, the vehicle may start and quit immediately after starting.

  • Ignition Coil: Your vehicle’s ignition coil takes the low voltage of the battery and provides the thousands of volts needed to create a spark in the spark plugs. When an ignition coil begins to fail, it may struggle to provide consistent spark to the plugs, causing the engine to stall after starting.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why the vehicle starts and then dies. The mechanic will then provide a detailed inspection report outlining why the vehicle quit and the cost of any repairs that need to be made.

How it's done:

A mechanic will begin diagnosing your vehicle’s issue by plugging a code reader/scanner into the vehicle’s computer. The mechanic should be able to get more information from your vehicle’s computer on what component has failed. Using this information, the mechanic can begin necessary repairs.

If your vehicle has a bad or failing mass airflow sensor, the mechanic will begin by finding the sensor in the engine bay and checking for any signs of failure. The mechanic should check the wire harness connected to the sensor to ensure that all of wires are properly connected. After removing the sensor, the mechanic should be able to discover the nature of the failure and replace the sensor.

If the mechanic suspects an issue with the fuel pump relay, he or she should check the vehicle’s computer for a problem. If the vehicle’s computer is having difficulty providing consistent power to the fuel pump relay, the computer may need to be reprogrammed or replaced. If the vehicle’s computer is functioning normally, the mechanic may need to replace the fuel pump relay.

If the mechanic suspects that the ignition coil may be faulty, he or she should first disconnect the battery before beginning work. The mechanic should then begin the process of disconnecting wires from the ignition coil and removing it from the engine bay. The mechanic will then install the new ignition coil and ensure that it is connected properly. The mechanic should then reconnect the battery and test the new coil.

With all repairs, the mechanic will ensure the newly installed parts work properly. The mechanic can then turn off and warning lights that may have come on while the vehicle was not running properly.

How important is this service?

If your vehicle is starting but dying soon after starting, you should have it checked out by a mechanic. Issues involving the fuel management and electrical systems will become worse if not dealt with. Diligence and paying attention to warning lights may help prevent further damage to critical engine component and may save money in repairs. A vehicle that quits after starting can be inconvenient and having a mobile mechanic inspect and repair you vehicle will ensure that you and your vehicle are back on the road soon.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(179)

Rating Summary
171
4
1
0
3
171
4
1
0
3

Chris

18 years of experience
492 reviews
Chris
18 years of experience
Pontiac Vibe L4-1.8L - Check Engine Light is on - Stafford, Texas
My car work was completed quickly. I also forgot that my filter probably needed to be changed. Chris pointed it out. Thanks for being on time.

AUDIE

33 years of experience
191 reviews
AUDIE
33 years of experience
Pontiac Vibe L4-1.8L - Starter - Henderson, Nevada
Right on time, friendly and helpful. Done quickly, and also advised me of some other potential issues to keep an eye on.

Michael

23 years of experience
53 reviews
Michael
23 years of experience
Pontiac Vibe L4-1.8L - Oil/Fluid Leak - Redford, Michigan
Michael arrived on time and provided professional service. I would recommend him to a relative or friend.

Torrieanto

12 years of experience
632 reviews
Torrieanto
12 years of experience
Pontiac Vibe L4-1.8L - Car is not starting - Clearwater, Florida
Torrienanto was very professional and wasted no time diagnosing the problem. I'd recommend him to anyone with any issues with their vehicle. Very honest guy and I appreciate that above all else.

Excellent Rating

(179)

Rating Summary
171
4
1
0
3
171
4
1
0
3
Number of Pontiac Vibe services completed
1969+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

P0524 OBD-II Trouble Code: Engine Oil Pressure Too Low
P0524 means there is an abnormally low oil pressure reading often due to defective engine components or incorrect oil viscosity.
Industry News for Automotive Techs: August 20-26
Ford commits to producing fully autonomous cars by 2021, BMW and Mitsubishi issue drivetrain recalls, and Honda patents a triple clutch transmission.
How to Replace an Air Cleaner Temperature Sensor
The air cleaner temperature sensor allows the computer to adjust engine timing and air/fuel ratio. A rough idle or "engine lag" are signs of failure.

Why would There be no power when I press on the gas?

If the engine Revs up, but the car does not accelerate, then your transmission must be slipping. You can check the fluid level in the transmission and add some if it is low, but even if this solves your problem,...

Blower motor switch...and the blow motor the same thing?

The blower motor and/or blower motor resistor (two different parts that work together) may have failed causing the symptoms you are experiencing. The blower motor switch (https://www.yourmechanic.com/services/blower-motor-switch-replacement) is the actual switch or button on the dash that you use to...

Can I replace oil pressure sensor on my 2012 Dodge Charger 3.6 v-6. Bought part but it s this something I can do? Thank you

Most oil pressure sensors are located near the oil filter. I believe that the oil filter is easily accessible on this engine. Search near the oil filter to find the switch. Once the switch is located, unplug the switch and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com