Pontiac GTO Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(33)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(33)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Pontiac GTO Mass Airflow Sensor Replacement is $210 with $115 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Pontiac GTOV8-6.0LService typeMass Airflow Sensor ReplacementEstimate$344.51Shop/Dealer Price$411.89 - $591.53
2006 Pontiac GTOV8-6.0LService typeMass Airflow Sensor ReplacementEstimate$324.51Shop/Dealer Price$391.91 - $571.56
2004 Pontiac GTOV8-5.7LService typeMass Airflow Sensor ReplacementEstimate$416.19Shop/Dealer Price$506.51 - $754.92
Show example Pontiac GTO Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(33)

Rating Summary
31
0
1
0
1
31
0
1
0
1

Terry

26 years of experience
326 reviews
Terry
26 years of experience
Pontiac GTO V8-5.7L - Check Engine Light is on - Phoenix, Arizona
I booked an appointment on Your Mechanic to have someone take a look at my Pontiac GTO. I had a MIL (check engine or service engine soon) light come on and the car was acting abnormal. Terry was my mechanic, who was very professional and ready to start the job. He hooked his scan tool to the vehicle and came to the conclusion that the ECM (engine control module) was bad and needed to be replaced. I bought a new computer for the car, took it to the dealer to have it reprogrammed, and now it works like a charm. Thanks Terry for the help.

Maxwell

18 years of experience
390 reviews
Maxwell
18 years of experience
Pontiac GTO V8-6.0L - Steering Rack/Gearbox - Spring, Texas
Everything went very well

Robert

12 years of experience
125 reviews
Robert
12 years of experience
Pontiac GTO V8-6.0L - Starter - Washington, District of Columbia
Good

Glenn

19 years of experience
71 reviews
Glenn
19 years of experience
Pontiac GTO V8-5.7L - Oil Change - College Park, Maryland
Was communicative and did a great, job. Couldnt have asked for more.

Excellent Rating

(33)

Rating Summary
31
0
1
0
1
31
0
1
0
1
Number of Pontiac GTO services completed
363+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Camshaft Position Sensor
Common signs include the Check Engine Light coming on, the vehicle not starting, and an overall reduction in vehicle drive quality.
Symptoms of a Bad or Failing Mass Airflow Sensor
Common signs of problems with a mass airflow sensor include running rich at idle or lean under load, decrease in fuel efficiency, and rough idles.
How Long Does an EVP Position Sensor Last?
An An integral part of your vehicle's EGR (exhaust gas recirculation) system is the EVP position sensor. This sensor has the important job of figuring out where the gate is positioned in order to allow gases to pass through to...

Cranks but will not start

As you already know, I would suggest testing the coil packs for spark. Try also checking the crank position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) to be sure it is working properly. When these go bad they can often cause the coils to not...

Hard transmission shifting, second time replaced

Hey there. This may be related to a bad or failing transmission control solenoid (https://www.yourmechanic.com/services/downshift-solenoid-replacement) or potentially the control module itself. As you know, the transmission control module has various sensors such as vehicle speed sensors (https://www.yourmechanic.com/services/speed-sensor-replacement), wheel speed sensors...

Where is the crankshaft position sensor located at on 2002 nissan frontier 3.3l v6 truck?

Hello. The crankshaft position sensor is located at the driver side rear of the engine in the transmission bell housing. That is where the sensor takes it reading from. If you decide you need some help with it, consider YourMechanic,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com