Pontiac Bonneville Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(69)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(69)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Pontiac Bonneville Valve Cover Gasket Replacement is $175 with $35 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Pontiac BonnevilleV6-3.8LService typeValve Cover Gasket ReplacementEstimate$779.34Shop/Dealer Price$886.30 - $1186.93
2003 Pontiac BonnevilleV6-3.8LService typeValve Cover Gasket ReplacementEstimate$756.82Shop/Dealer Price$859.36 - $1156.68
2000 Pontiac BonnevilleV6-3.8L TurboService typeValve Cover Gasket ReplacementEstimate$815.21Shop/Dealer Price$918.56 - $1216.49
1991 Pontiac BonnevilleV6-3.8LService typeValve Cover Gasket ReplacementEstimate$835.38Shop/Dealer Price$971.48 - $1371.01
2001 Pontiac BonnevilleV6-3.8LService typeValve Cover Gasket ReplacementEstimate$756.82Shop/Dealer Price$863.10 - $1163.23
1997 Pontiac BonnevilleV6-3.8L TurboService typeValve Cover Gasket ReplacementEstimate$890.10Shop/Dealer Price$1029.82 - $1438.21
1997 Pontiac BonnevilleV6-3.8LService typeValve Cover Gasket ReplacementEstimate$678.58Shop/Dealer Price$765.12 - $1014.65
2005 Pontiac BonnevilleV8-4.6LService typeValve Cover Gasket ReplacementEstimate$1091.22Shop/Dealer Price$1215.07 - $1568.66
Show example Pontiac Bonneville Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(69)

Rating Summary
63
5
1
0
0
63
5
1
0
0

Claud

6 years of experience
341 reviews
Claud
6 years of experience
Bonneville 2000 - Spark Plugs - Detroit, MI
Claude was very informative, known and efficient!

Gregory

208 years of experience
385 reviews
Gregory
208 years of experience
Bonneville 2001 - Starter - Littleton, CO
Good man, great mechanic

Joseph

0 years of experience
646 reviews
Joseph
0 years of experience
Bonneville 1999 - Heater Blower Motor - Taylorsville, UT
Joseph is always prompt, and knowledgeable. Does a good inspection and get's to work ... fixes the issues quickly and very friendly.

Joe

0 years of experience
528 reviews
Joe
0 years of experience
Bonneville 2005 - Power Steering Pressure Hose - Fairview, TN
Joe was a little late but he texted me before our appointment to let me know. Once he arrived he was very professional and repaired my vehicle in an expert manner. He had all of the tools and parts needed to complete the job with him and there were no surprises.

Excellent Rating

(69)

Rating Summary
63
5
1
0
0
63
5
1
0
0
Number of Pontiac Bonneville services completed
759+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

P0207 OBD-II Trouble Code: Injector Circuit Malfunction - Cylinder 7
P0207 P0207 code definition Injector Circuit Malfunction - Cylinder 7 What the P0207 code means The P0207 code is a common OBD2 diagnostic trouble code (DTC) that is set when the Engine Control Module (ECM) detects out of range performance...
Fiat Certified Pre-Owned (CPO) Car Program
If If you are in the market for a used Fiat vehicle, you may want to consider cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Fiat, for...
How Long Does an AC Condenser Fan Last?
The The AC condenser fan in your car works to convert refrigerant into a liquid form. Essentially, it takes heat away from your air conditioning system by delivering air to the condenser. In removing heat from the AC system, it...

Car is hard to shift

I am assuming you have an automatic transmission because you had it flushed. Hard to shift issues can be caused by a bad cable that goes from the shifter to the transmission shift lever, The cables will get dirty and...

Why does my steering wheel make a growling noise when it's turned?

Hi there. Assuming the growling noise in your steering wheel is inside the vehicle, this would lead me to believe there is a problem with steering shaft bearings. It is rare for these bearings to fail. It could also be...

I just got a new battery for my car but today my car won’t start when I put keys in it keeps making a clicking noise

Among the possibilities are that the alternator is not properly re-charging your battery and so when you last turned your car off the battery was, unbeknownst to you, discharged; there is a parasitic power draw when your vehicle is off...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com