Oldsmobile 98 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(34)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(34)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Oldsmobile 98 Front Crankshaft Seal Replacement is $202 with $20 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Oldsmobile 98V6-3.8LService typeFront Crankshaft Seal ReplacementEstimate$261.48Shop/Dealer Price$277.64 - $314.78
1993 Oldsmobile 98V6-3.8LService typeFront Crankshaft Seal ReplacementEstimate$248.87Shop/Dealer Price$262.55 - $297.84
1994 Oldsmobile 98V6-3.8L TurboService typeFront Crankshaft Seal ReplacementEstimate$730.63Shop/Dealer Price$750.49 - $790.40
1990 Oldsmobile 98V6-3.8LService typeFront Crankshaft Seal ReplacementEstimate$248.87Shop/Dealer Price$262.59 - $297.90
1995 Oldsmobile 98V6-3.8LService typeFront Crankshaft Seal ReplacementEstimate$657.64Shop/Dealer Price$682.75 - $726.60
1991 Oldsmobile 98V6-3.8LService typeFront Crankshaft Seal ReplacementEstimate$248.87Shop/Dealer Price$262.78 - $298.24
1995 Oldsmobile 98V6-3.8L TurboService typeFront Crankshaft Seal ReplacementEstimate$730.63Shop/Dealer Price$750.56 - $790.52
1996 Oldsmobile 98V6-3.8LService typeFront Crankshaft Seal ReplacementEstimate$657.64Shop/Dealer Price$676.56 - $715.77
Show example Oldsmobile 98 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(34)

Rating Summary
33
0
0
0
1
33
0
0
0
1

Shaun

11 years of experience
542 reviews
Shaun
11 years of experience
Oldsmobile 98 V6-3.8L - Radiator - Tempe, Arizona
Came on his day off to help and is incredibly flexible with scheduling.

Lucas

30 years of experience
938 reviews
Lucas
30 years of experience
Oldsmobile 98 V6-3.8L - Oil Change - Los Angeles, California
Prompt. Professional. Knowledgeable and explained everything so I could understand. Will definitely use his services again.

Greg

23 years of experience
624 reviews
Greg
23 years of experience
Oldsmobile 98 V6-3.8L Turbo - Car is not starting Inspection - Apache Junction, Arizona
Arrived on time with all possible needed tools. Very knowledgeable and was able to locate and repair what other shops were unable to accomplish. Highly recommend him and would call him again.

Joseph

34 years of experience
540 reviews
Joseph
34 years of experience
Oldsmobile 98 V6-3.8L - Crankshaft Position Sensor - McKinney, Texas
Fast, efficient and extremely convenient. Joseph is friendly and knowledgable on the necessary repairs and did it for a fair price. We will be using him again in the very near future.

Excellent Rating

(34)

Rating Summary
33
0
0
0
1
33
0
0
0
1
Number of Oldsmobile 98 services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

How Long Does an AC Control Switch Last?
Every Every year, vehicles become more and more complex, with computer components replacing mechanical parts. This is very apparent in your car’s air conditioning system, which relies on an AC control module to deliver the ideal heating and air conditioning...
What is a VIN and Where Can I Find It?
The Vehicle Identification Number, or VIN, includes specific information about your car, including the model year, engine code, and country of origin.
How Can I Save Money on Gas?
Everyone Everyone wants to get the best possible gas mileage. Here are five ways to get more mileage out of each tank of gas: Remove dead weight: Get rid of the extra junk in your car. From golf clubs to...

How do I unlock the ignition?

When your car is turned off, the steering wheel can lock into place. When the steering wheel is locked, the ignition will be locked as well, and you will not be able to turn the ignition past Lock. When this...

Small amout of oil leaking on the driveway

Hello. We will be happy to assist you. A few drops a day should not cause too much of a concern but you want to keep your eye on your oil level to make sure it doesn't get too low...

My coolant reservoir (plastic part) is always empty after 3-5 days but my radiatior is always full and then my car starts to over

Claimed by Jeff Engstrom

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com