Oldsmobile 98 Car Heater Blower Motor Resistor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(30)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(30)

Car Heater Blower Motor Resistor Replacement Service

How much does a Car Heater Blower Motor Resistor Replacement cost?

On average, the cost for a Oldsmobile 98 Car Heater Blower Motor Resistor Replacement is $111 with $16 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1981 Oldsmobile 98V8-5.0LService typeCar Heater Blower Motor Resistor ReplacementEstimate$807.19Shop/Dealer Price$990.24 - $1516.89
1994 Oldsmobile 98V6-3.8L TurboService typeCar Heater Blower Motor Resistor ReplacementEstimate$165.75Shop/Dealer Price$193.46 - $254.04
1995 Oldsmobile 98V6-3.8LService typeCar Heater Blower Motor Resistor ReplacementEstimate$165.75Shop/Dealer Price$193.46 - $254.04
1982 Oldsmobile 98V6-4.1LService typeCar Heater Blower Motor Resistor ReplacementEstimate$205.79Shop/Dealer Price$243.49 - $334.08
1993 Oldsmobile 98V6-3.8LService typeCar Heater Blower Motor Resistor ReplacementEstimate$165.95Shop/Dealer Price$193.72 - $254.47
1992 Oldsmobile 98V6-3.8LService typeCar Heater Blower Motor Resistor ReplacementEstimate$165.95Shop/Dealer Price$193.71 - $254.44
1980 Oldsmobile 98V8-5.7L DieselService typeCar Heater Blower Motor Resistor ReplacementEstimate$132.71Shop/Dealer Price$150.77 - $182.72
1995 Oldsmobile 98V6-3.8L TurboService typeCar Heater Blower Motor Resistor ReplacementEstimate$170.75Shop/Dealer Price$198.69 - $259.46
Show example Oldsmobile 98 Car Heater Blower Motor Resistor Replacement prices

What is the Heater Blower Motor Resistor all about?

The heater blower motor resistor is located underneath the dashboard in the heater/AC compartment. The resistor enables the heater blower motor to change the speed of the fan. Without this part you will not be able to change the speed of the airflow from the blower motor. It is also possible that the heater motor blower may not work at all. If the resistor has gone bad, it is likely that the fan will work only on the highest speed.

Keep in mind:

*If no air is coming out of your vents, you may have a problem with the heater blower motor as well as the resistor. * Mechanical resistance to the fan (such as when something gets stuck in the fan), can often cause damage to the heater blower motor resistor.

How it's done:

  • Inspect electrical circuits to verify faulty resistor.
  • Remove and replace the faulty resistor.

Our recommendation:

The air and heating system in your vehicle is a closed system, so it won’t be inspected during servicing and routine maintenance. If you notice any part of the air and heating system behaving bizarrely, however, you should always schedule an inspection. If your fan is stuck on high, you likely have a bad heater blower motor resistor, and should schedule to have it replaced.

What common symptoms indicate you may need to replace the Heater Blower Motor Resistor?

  • Blower motor only operates at 2 speeds instead of 4 speeds.
  • Blower motor is not functioning (no air from vents).

How important is this service?

To ensure proper operation of the blower motor, the resistor has to be working correctly or else you may end up with either no airflow from the fan or your fan will be stuck on one speed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(30)

Rating Summary
29
0
0
0
1
29
0
0
0
1

Greg

21 years of experience
112 reviews
Greg
21 years of experience
98 1995 - Car is not starting - Apache Junction, AZ
Arrived on time with all possible needed tools. Very knowledgeable and was able to locate and repair what other shops were unable to accomplish. Highly recommend him and would call him again.

Ben

34 years of experience
1419 reviews
Ben
34 years of experience
98 1995 - Oil Pressure Light is on - Houston, TX
They just sent an email saying the mechanic is on his way. It is only 8:12 am! He is off to a good start. He is supposed to arrive between 9:00-9:30 am. He arrived well before that time! It was not 9:00 am yet! He did a diagnostic and he checked all the work I did. He said I did great work with everything I did. He said the car is very good shape. He said this car is indeed a runner! He checked everything. He checked all the fuses and relays too. He did a complete diagnostic too. He checked fuel pressure, oil pressure, and more. He found out what it was. It had nothing to do with oil pressure or anything. The fuel pump is going out. When he came the car started right up. He said they never go totally out. He said that is why it started when it did. He connected tools I do not have to the Ninety Eight. It is not getting any fuel pressure, and this is why it shut off all the times it did. He fixed one of the spark plug wires too. It was burnt. He jacked the Ninety Eight up and got underneath and checked the wires, the oil pressure sensor/switch and oil level sender for everything and the connections and made sure they have power and were installed correctly. He said the engine uses oil pressure along with the fuel pressure to start. The fuel pressure is non existent and that is why it would not start. After all of that, he looked at the Oldsmobile Toronado, my other car . He got the air conditioner to work again. He said the compressor bolt was loose and he tightened it up. He used this huge screw driver device and bent it back in place. He said the shims were loose and he bent them back. It cools just fine now. We turned it on and off several times testing it. He checked the pressure and it was filled with refrigerant. He checked the relays and the fan too. It was all fine. He said it is clear you take care of both of your cars. He said one thing I will not do is guess and I like to know what is indeed wrong. He said your cars are in good shape. He said you do not need valve cover gaskets. There is no leak. I booked him to return to install the fuel pump I need. I look forward to seeing him again soon in a few weeks. Today only cost me 70.00. That's it.

Breck

15 years of experience
760 reviews
Breck
15 years of experience
98 1995 - Oil Pressure Light is on - Houston, TX
The mobile mechanic came. I must say I am impressed! He found my house. He and I started talking. He said he owned two Ninety Eights previously. He was there to look at my Oldsmobile Ninety Eight. He had two Oldsmobile Ninety Eight Touring Sedans. The ones he owned were from the 1987-1990 era. He was describing the floor shifters and they had and how much he liked Ninety Eights, Touring Sedans, and the Oldsmobile Eighty Eight LSS too. He talked about how a family member owned one and how he was fixing his. He talked in detail about the Touring Sedan and the things he loved. He asked me how long had I owned my Ninety Eight. I told him 2003. He told me how he become a mechanic and went to school for it and more. He got into the Ninety Eight and it would not start. He got out and disconnected the battery and rubbed the negative and positive battery terminals together. He reconnected them and the Ninety Eight started! The instrumentation then told him exactly what it was. There is a sensor at the bottom of the oil pan. He said by doing what he did with the terminals, it cleared the computer and reset it. We went underneath the car and he showed me the sensor. He said which one did you replace? I told him. He said you were on the right path. You know what you are doing. You need to replace this sensor and not the one you did. You can get the sensor and replace it because it is clear you know what you are doing and on the right path. He said you also need to replace your valve cover gaskets. They are leaking. I told him I will request him to come back and do that. I am not doing that even thought I can.

Lucas

10 years of experience
1083 reviews
Lucas
10 years of experience
98 1995 - Crankshaft Position Sensor - North Hills, CA
On time and professional. Lucas did a great job. I highly recommend him and will be happy to have him handle my cars service needs in the future.

Excellent Rating

(30)

Rating Summary
29
0
0
0
1
29
0
0
0
1
Number of Oldsmobile 98 services completed
330+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Porsche Panamera Hybrid
Porsche Porsche is known for its prestige, power and performance, and its hybrid introduction to the Panamera line does not disappoint. While its hatchback design may put some off, the interior is nothing short of spectacular with well-appointed materials that...
Symptoms of a Bad or Failing Cabin Air Filter
Poor air flow and an unusual odor can indicate it's time to replace the cabin air filter.
The Traveler’s Guide to Driving in Chile
Chile Chile is a fascinating place to visit, and you can find quite a few attractions (https://www.tripadvisor.com/Attractions-g294291-Activities-Chile.html) to enjoy while you are there. You might want to head to the Torres del Paine National Park, Lago Todos Los Santos, Parque...

Right front brake?? comes on when turning on a left hand curve in the road. not every curve but always the same curve.

This is definitely an odd symptom, however it sounds like there may potentially be a brake line (possibly to the right side caliper) being pinched or hung up causing the caliper to grab when turning left. This is something that...

Can I bypass my AC compressor pulley?

Hello. The type of engine you have will determine how this should be done. The easiest way to do this would be to install a bypass pulley in place of the compressor. There is a bypass pulley with a bracket...

Abs light, emergency brake light, steering wheel assist light, engine light, EPC light, traction control light

Hello, thank you for writing in. The vehicle does utilize a lot of the same sensors for these systems. Are there any other codes that are coming up when this code appears? If so you will want to take these...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com