Mitsubishi 3000GT Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(36)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(36)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Mitsubishi 3000GT Valve Cover Gasket Replacement is $224 with $42 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Mitsubishi 3000GTV6-3.0L TurboService typeValve Cover Gasket ReplacementEstimate$823.04Shop/Dealer Price$965.53 - $1378.42
1995 Mitsubishi 3000GTV6-3.0LService typeValve Cover Gasket ReplacementEstimate$424.57Shop/Dealer Price$485.65 - $663.52
1994 Mitsubishi 3000GTV6-3.0LService typeValve Cover Gasket ReplacementEstimate$806.82Shop/Dealer Price$946.18 - $1356.72
1992 Mitsubishi 3000GTV6-3.0LService typeValve Cover Gasket ReplacementEstimate$806.82Shop/Dealer Price$946.18 - $1356.71
1998 Mitsubishi 3000GTV6-3.0LService typeValve Cover Gasket ReplacementEstimate$287.41Shop/Dealer Price$312.82 - $378.59
1997 Mitsubishi 3000GTV6-3.0LService typeValve Cover Gasket ReplacementEstimate$287.41Shop/Dealer Price$310.96 - $375.32
1995 Mitsubishi 3000GTV6-3.0L TurboService typeValve Cover Gasket ReplacementEstimate$424.57Shop/Dealer Price$485.70 - $663.61
1996 Mitsubishi 3000GTV6-3.0L TurboService typeValve Cover Gasket ReplacementEstimate$424.57Shop/Dealer Price$485.68 - $663.57
Show example Mitsubishi 3000GT Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(36)

Rating Summary
33
2
1
0
0
33
2
1
0
0

Andrew

27 years of experience
72 reviews
Andrew
27 years of experience
Mitsubishi 3000GT V6-3.0L - Spark Plug Replacement - Durham, North Carolina
The best

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
Mitsubishi 3000GT V6-3.0L - Idler Pulley - Humble, Texas
Ben is a Master Technicisn. He is extremely knowledgeable and professional.

AL

13 years of experience
245 reviews
AL
13 years of experience
Mitsubishi 3000GT V6-3.0L - Spark Plugs - Arvada, Colorado
Great mechanic would use his services again

Tom

43 years of experience
205 reviews
Tom
43 years of experience
Mitsubishi 3000GT V6-3.0L - Oil Change - Santa Clara, California
amazing service, taught me a lot of things as always!

Excellent Rating

(36)

Rating Summary
33
2
1
0
0
33
2
1
0
0
Number of Mitsubishi 3000GT services completed
396+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
800+
experts on our platform

Recent articles & questions

Utah Parking Laws: Understanding the Basics
When When you are on the roads in Utah, you know how important it is to obey all the rules of the road. They are there for your safety and to ensure that traffic can flow unhindered. However, you need...
P2203 OBD-II Trouble Code: NOx Sensor Circuit High Input Bank 1
P2203 P2203 code definition NOx Sensor Circuit High Input Bank 1 What the P2203 code means This code indicates the NOx module is maintaining a high voltage to the NOx (Oxides of Nitrogen) sensor. What causes the P2203 code? This...
How to Get Car Reviews on Edmunds
If you are in the market to purchase a new car (https://www.yourmechanic.com/article/how-to-buy-a-car-online-by-elan-mcafee), it is in your best interest to know as much about your potential vehicle as possible. With the ever-expanding reach of the internet, researching potential purchases (https://www.yourmechanic.com/article/5-essential-things-to-know-about-used-car-reviews) is...

Not happy about transmission failure

Chevrolet determined that the transmission on the 2009 Chevy Traverse that are equipped with the 6T70/75 6-speed automatic transmission (RPO MH2, MH4, MH6, and MY9 have breaks on the clutch wave plates. This causes the transmission to have no reverse,...

Advice on cooler additives

Some of it is "snake" oil (that doesn't work) and some of it works to some extent. Realize that the best cooling is water. Water has specific heat and cooling. So water actually cools better than antifreeze. But of course...

How do you fix a seat belt retractor that's locked up

Hi Matt. Thanks for sending your question tonight. Usually, there are two reasons why this will occur. First, if the spring inside the seat belt is broken, then you'll typically replace the entire unit (as it's more difficult to attempt...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com