Mercedes-Benz Maybach S550 Brake System Flush at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(96)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(96)

Brake System Flush Service

How much does a Brake System Flush cost?

On average, the cost for a Mercedes-Benz Maybach S550 Brake System Flush is $180 with $40 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Mercedes-Benz Maybach S550V8-4.7L TurboService typeBrake System FlushEstimate$235.62Shop/Dealer Price$259.38 - $322.54
Show example Mercedes-Benz Maybach S550 Brake System Flush prices

What is a brake system flush all about?

Brake fluid is essential for the operation of a car’s brakes. When you push the brake pedal, the brake fluid causes the brake pads to press against the rotors, making the car slow down and stop. Over time, the brake fluid absorbs air, moisture, sludge and other contaminants and gets contaminated. Air in the brake fluid causes braking to feel spongy and significantly reduces braking efficiency. A brake system flush includes removing the existing fluid and moisture out of the system and replacing it with new, clean, fluid. A brake fluid flush ensures proper brake system performance and increases the lifespan of your brake system components.

Keep in mind:

A mobile mechanic will use a hand-held vacuum pump and/or atmospheric pressure to remove the fluid. While it is not as powerful as a pressure bleeder, this is an industry approved method of bleeding your brakes. It gets the job done and provides the convenience of a mechanic coming to you.

How it's done:

  • Remove contaminated brake fluid
  • Add new brake fluid
  • Bleed the brakes
  • Clean any surfaces where brake fluid has spilled during the bleeding process
  • Check for fluid leaks
  • Inspect brake pads, rotors and hoses
  • Test drive car

Our recommendation:

Please follow the manufacturer's maintenance schedule and guidelines regarding fluid maintenance. It is a good practice to change brake fluid every 24,000 miles or 36 months. Always use a fluid recommended by your vehicles manufacturer (do not use silicone based brake fluids if your car needs regular brake fluid).

What common symptoms indicate you may need a brake system flush?

  • Brake fluid appears black or brown indicating contamination
  • Brake pedal feels spongy
  • Diminished brake system performance

How important is this service?

If you do not regularly flush your brake system, it will end up costing you more money down the road. As the fluid becomes contaminated, it will eventually cause brake system components to fail and leak. This will also lead to diminished brake system performance, causing a safety concern.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(96)

Rating Summary
92
2
2
0
0
92
2
2
0
0

Kenneth

21 years of experience
870 reviews
Kenneth
21 years of experience
Mercedes-Benz C350 V6-3.5L - Brake System Flush - Los Angeles, California
Kenneth is generally good. Bleeding the brakes is part and parcel of changing the fluid. This should be part of the service.

Ross

19 years of experience
54 reviews
Ross
19 years of experience
Mercedes-Benz ML430 V8-4.3L - Brake System Flush - Santa Rosa, California
Ross was awesome! Called me from his cell to confirm appointment the night before. Showed up on time, even though I live deep in the woods. He showed me how to flush my brake lines, talked to me about other problems my car might have but without up-selling me on the work to be done. He performed a 1 hour job in 35 minutes, and he did it well. I have a notoriously difficult Mercedes model. Ross knew his way around it. MUCH better service than I have had at even Master Mechanics. I saved his number and WILL be booking him again. Also, I will be recommending to friends.

Simon

31 years of experience
109 reviews
Simon
31 years of experience
Mercedes-Benz CLK350 V6-3.5L - Brake System Flush - Albuquerque, New Mexico
On time. Very professional. Gave car a 50 point check. Advised me on the brake pedal question I had. All excellent,!

James

32 years of experience
705 reviews
James
32 years of experience
Mercedes-Benz E320 V6-3.2L - Brake System Flush - Tustin, California
Professional, knowledgeable, conscientious, diligent would be a good start.

Excellent Rating

(96)

Rating Summary
92
2
2
0
0
92
2
2
0
0
Number of Mercedes-Benz Brake System Flush services completed
1056+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

The Guide To Colored Curb Zones in South Carolina
South South Carolina parking laws: understanding the basics When parking in South Carolina, you need to make sure you understand the rules and laws that are in place. Knowing these will not only help to keep you from getting fines...
How Long Does a Pitman Arm Last?
Your Your car’s steering system is pretty complex and requires a significant number of components working in harmony in order to ensure that you can steer safely while driving. The Pitman arm is one of the most critical components, and...
How to Prepare for the Idaho Driver’s Written Test
If If you are preparing to get your license in Idaho, you know that you first need to pass your written exam so you can then take your road test. The written exam, while it isn’t difficult, does cause some...

I have 2009 Toyota Highlander, LIMITED.

Since you recently did some work on the driveshaft, I would first suspect there was a problem as a result of the installation process. Before you begin taking the wheel off for inspection, I would connect a scanner to retrieve...

Jerks while going up hill or between 40-60 mph.

Hi There, It sounds like you may have a misfire in a cylinder causing the jerking or surging reaction you are describing. This is common with this generation of Ford F150's and is many times caused by a faulty coil...

Loud clunking noise when i drive over pot holes and bumps. Any idea what this could be?

Unfortunately, as our vehicles age, the parts will just wear out. There are a few possible issues that can cause a clunk when going over bumps (https://www.yourmechanic.com/services/clunking-noise-when-i-drive-over-bumps-inspection), in a vehicle that is getting up there in mileage. Worn shocks/struts, worn...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com