Mercedes-Benz E350 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(457)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(457)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Mercedes-Benz E350 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Mercedes-Benz E350V6-3.5LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2021 Mercedes-Benz E350L4-2.0L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2009 Mercedes-Benz E350V6-3.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2011 Mercedes-Benz E350V6-3.0L Turbo DieselService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2012 Mercedes-Benz E350V6-3.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2015 Mercedes-Benz E350V6-3.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2013 Mercedes-Benz E350V6-3.0L Turbo DieselService typeWindows InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2008 Mercedes-Benz E350V6-3.5LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Mercedes-Benz E350 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(457)

Rating Summary
425
15
6
1
10
425
15
6
1
10

Rusty

23 years of experience
517 reviews
Rusty
23 years of experience
Mercedes-Benz E350 V6-3.5L - Car is not starting - Arlington, Texas
Excellent

Bryant

12 years of experience
608 reviews
Bryant
12 years of experience
Mercedes-Benz E350 V6-3.5L - Oil Change - Indianapolis, Indiana
Did a good job

Andrian

32 years of experience
185 reviews
Andrian
32 years of experience
Mercedes-Benz E350 V6-3.5L - Brake System Inspection - Deerfield Beach, Florida
Excellent job ! would higly recamend him to all my friends. Very satisfied.

Jerome

36 years of experience
16 reviews
Jerome
36 years of experience
Mercedes-Benz E350 V6-3.5L - Loud clicking noise when I turn the car - ,
Jerome was timely, professional, and courteous. This was an overall convenient way to diagnose & service your car. Only situation you run into is when you have major problem with electrical like my car. As knowledgeable Jerome was you really need to take it to a service center where they are more equipped with tools & resources. Your Mechanic services are more ideal for minor servicing & oil change.

Excellent Rating

(457)

Rating Summary
425
15
6
1
10
425
15
6
1
10
Number of Mercedes-Benz E350 services completed
5027+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Hatch Lock Cylinder
Common signs include the hatch lock cylinder just spinning or not turning at all when you insert the key, and the key not even being able to go in.
P0632 OBD-II Trouble Code: Odometer Not Programmed – ECM/PCM
P0632 means that the PCM is unable to read the odometer due to battery in the vehicle becoming discharged or for electrical reasons.
B1921 OBD-II Trouble Code: Air Bag Diagnostic Monitor Ground Circuit Open
B1921 means there is an issue with the airbag system diagnostic module, likely because of faulty electrical components.

How do you activate or deactivate the Cross Traffic Alert system?

If your car is equipped with a Cross Traffic Alert system (not all Fusions have this feature), it provides you with important information about traffic conditions to improve your safety. It’s really all about detecting traffic, pedestrians and other obstacles...

Continuous misfire of cylinder 2

Cylinder compression in all four cylinders should be verified. Secondary firing patterns should be scoped to get independent verification (i.e., apart from what the OBD-II system might be reporting) that indeed the problem is just in cylinder no. 2 (https://www.yourmechanic.com/article/p0302-obd-ii-trouble-code-cylinder-2-misfire-detected-by-jamahl-walker)....

My car won't start, not even let me inside the car- unlock it, where do I tow it? What do I do?

Hi Dani. Thanks for contacting us today. If you are a member of AAA, you should call them and they will send over a tow truck. Even if the vehicle can't be opened, they can usually get the vehicle on...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com