Mercedes-Benz CLK550 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(17)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(17)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Mercedes-Benz CLK550 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Mercedes-Benz CLK550V8-5.5LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2008 Mercedes-Benz CLK550V8-5.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2009 Mercedes-Benz CLK550V8-5.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Mercedes-Benz CLK550 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(17)

Rating Summary
16
0
0
0
1
16
0
0
0
1

Richard

11 years of experience
450 reviews
Richard
11 years of experience
Mercedes-Benz CLK550 V8-5.5L - 75 Point Safety Inspection - Spring, Texas
Very knowledgeable, personable and professional.

James

31 years of experience
690 reviews
James
31 years of experience
Mercedes-Benz CLK550 V8-5.5L - Pre-purchase Car Inspection - Placentia, California
Great service

Matthew

11 years of experience
53 reviews
Matthew
11 years of experience
Mercedes-Benz CLK550 V8-5.5L - Reset Maintenance Reminder System - Venice, California
quick & perfect!

Jeff

33 years of experience
441 reviews
Jeff
33 years of experience
Mercedes-Benz CLK550 V8-5.5L - Engine is running louder than normal - Sacramento, California
Jeff is the best. Diagnosed the problem with my vehicle's suspension in no time.

Excellent Rating

(17)

Rating Summary
16
0
0
0
1
16
0
0
0
1
Number of Mercedes-Benz CLK550 services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Car Seat Use Guidelines after a Crash
The The car seat is one of the most important purchases a parent can make towards ensuring the safety of their child. Rear-facing car seats especially can mean the difference between little to no injury and major injury and possible...
Rules of the Road For Alabama Drivers
While While many of the rules of the road are common sense or rely on a driver’s knowledge of how to read signs, there are other rules that may differ from state to state. The following are some of the...
How to Get an Oregon Driver's Permit
The The state of Oregon requires all new drivers under 18 to begin driving with a learner’s permit, in order to practice safe driving under supervision before getting their full driver’s license. To receive the initial learner’s permit, you must...

What is the Radio Data System (RDS)?

Your Honda Accord’s audio system includes advanced functionality that takes advantage of modern radio broadcasting features. The Radio Data System (RDS) is used to display additional information about the station you’re listening to, and other information. This only works if...

I bent my rear sway bar pretty bad. Had it replaced, but the wheel is still a little bent. What else can be the problem?

Hi there. The rear wheel being out of alignment, could be the result of a bent strut assembly (https://www.yourmechanic.com/services/strut-assembly-replacement), a bent trailing/control arm (https://www.yourmechanic.com/services/control-arm-assembly-replacement), a bent bearing knuckle and/or bent rear subframe. Replacing components without diagnosis can be expensive and...

Hi. i have a 2000 kia sportage 4WD and it looks like the fuel pump needs to be replaced. Is it necessary to drop the fuel tank in order to replace the fuel pump?

Hi there. The fuel pump could be changed by using a special tool behind the seats in your vehicle. You will have to remove the carpet behind the rear seats and you will have access to the fuel pump. I...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com