Mercedes-Benz AMG GT 63 S E Performance Windshield Wiper/Washer System Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Windshield Wiper/Washer System Inspection Service

How much does a Windshield Wiper/Washer System Inspection cost?

On average, the cost for a Mercedes-Benz AMG GT 63 S E Performance Windshield Wiper/Washer System Inspection is $184 with $38 for parts and $146 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
* Mercedes-Benz AMG GT 63 S E PerformanceV8-4.0L Turbo HybridService typeWindshield Wiper/Washer System InspectionEstimate$230.76Shop/Dealer Price$256.00 - $317.55
* Mercedes-Benz AMG GT 63 S E PerformanceV8-4.0L Turbo HybridService typeWindshield Wiper/Washer System InspectionEstimate$221.75Shop/Dealer Price$243.90 - $303.13
* Mercedes-Benz AMG GT 63 S E PerformanceV8-4.0L Turbo HybridService typeWindshield Wiper/Washer System InspectionEstimate$221.75Shop/Dealer Price$243.94 - $303.20
* Mercedes-Benz AMG GT 63 S E PerformanceV8-4.0L Turbo HybridService typeWindshield Wiper/Washer System InspectionEstimate$221.75Shop/Dealer Price$246.52 - $307.71
Show example Mercedes-Benz AMG GT 63 S E Performance Windshield Wiper/Washer System Inspection prices

The windshield wiper and washer system help keep a windshield clean and free of rain, dirt, sleet or snow. This system is not only a convenience but a safety system as well. Limited visibility due to a dirty windshield can make safe driving difficult or impossible.

There are a number of components in the wiper/washer system that can malfunction and cause problems. Everything from a blown fuse to a bad pump can leave a windshield dirty.

How this system works:

Windshield wipers use two different technologies to keep the windshield clean. An electric motor using a worm gear provides the power to move the wipers while a linkage converts the rotational output of the electric motor into the familiar back and forth motion of the wiper blades.

The windshield washer system uses a washer pump that is installed at the base of the washer fluid reservoir. The pump is activated by a spring-loaded switch, this switch turns on the wipers as well. The fluid is pumped through a rubber or plastic hose that runs up to windshield and separates in two lines that feed the washer nozzles on the hood of the car.

Common reasons for this to happen:

Windshield Wiper Issues

  • Worn wiper blades: Wiper blades need to be replaced on a regular basis. Worn wiper blades will not clean the windshield. Smearing or streaking are common symptoms of worn blades. If the blades chatter this can also indicate dirty or worn blades. Torn or cracking blades need to be replaced.

  • Bent or loose wiper arms: Wiper arms can become bent, usually due to vandalism. If the wiper blades are not cleaning the windshield but still appear to be in good shape loose or bent wiper arms could be the problem.

  • Malfunctioning wiper arm linkage: The linkage between the wiper motor and the blades can become damaged. The most common symptom of a broken linkage is one wiper arm not working.

  • Blown fuse: A blown fuse will cut off the electric current to the wiper motor. If both blades fail to function when turned on, a blown fuse is usually the starting point for a diagnosis.

  • Bad wiper motor: If the blades fail to operate at all, are operating slowly, only operate on one speed or do not stop in the correct position a bad or malfunctioning wiper motor could be the culprit. The motor will need to be repaired or replaced.

  • Defective wiper switch: If the wipers do not turn on when the switch is flipped, keep running after being switched off or it is impossible to select the proper speed settings the switch may be defective and will have to be replaced.

Windshield Washer Issues

  • No washer fluid: One of the most common reasons windshield washers fail to work is because the fluid reservoir is empty.

  • Blown fuse: Fuses provide overcurrent protection to all of the vehicle’s electrical units and this includes the windshield washer system. If a fuse blows, the electrical current to the washer pump will be cut off and the washer system will not work.

  • Bad windshield washer switch: The switch that turns on the windshield washer can malfunction and fail to send a signal to the pump. If this happens the pump will not work.

  • Broken washer pump: The electric pump that sends the fluid from the reservoir to the nozzles can malfunction or break.

  • Leaky washer tubes or bottle: The washer reservoir or the tubing that moves the fluid to the nozzles can crack or leak. This can lead to lost fluid on route to the nozzles, which can result in a weak spray or no spray at all.

  • Clogged washer tubes or nozzles: The tubing or the nozzles themselves can become clogged with debris. The nozzles, which are quite small can easily get clogged by dirt, leaves or other debris.

  • Frozen washer fluid: In extremely cold weather it is possible for washer fluid to freeze. If the fluid is frozen it should thaw as the car warms up.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the windshield wiper or washer system issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning windshield wiper or washer system is usually not a life or death situation but it should be addressed as soon as it is convenient. This can become a very real problem if the weather suddenly turns bad as limited visibility can make driving extremely dangerous.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Jeremy

21 years of experience
802 reviews
Jeremy
21 years of experience
Mercedes-Benz SLK350 V6-3.5L - Windshield Wiper/Washer System Inspection - West Palm Beach, Florida
Jeremy was right on time and was able to fix my problem easily

Jerry

31 years of experience
48 reviews
Jerry
31 years of experience
Mercedes-Benz C43 AMG V8-4.3L - Windshield Wiper/Washer System Inspection - Las Vegas, Nevada
Jerry did a great job. definitely knows MB. very clean operation.

Mark

12 years of experience
349 reviews
Mark
12 years of experience
Mercedes-Benz E320 L6-3.2L - Windshield Wiper/Washer System Inspection - Menlo Park, California
10/10, really! I came back to YM.com with my second car for Mark to diagnose some suspicious engine noise - cracked belt! Saved thousands due to timely preventive maintenance! Thanks, Mark!

Joseph

43 years of experience
55 reviews
Joseph
43 years of experience
Mercedes-Benz CLK320 V6-3.2L - Windshield Wiper/Washer System Inspection - Raleigh, North Carolina
Joseph was thorough. quick and knowledgeable. I am extremely satisfied with the entire experience.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Mercedes-Benz Windshield Wiper/Washer System Inspection services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Camshaft Position Sensor
The The camshaft position sensor is a vital part of your engine’s ability to function properly. It detects the position, speed, acceleration and deceleration of the camshaft, which regulates the injection of fuel into the engine. In order to make...
P0429 OBD-II Trouble Code: Catalyst Heater Control Circuit
P0429 means that both of the heated oxygen sensors have malfunctioned in some way.
P2700 OBD-II Trouble Code: Transmission Friction Element "A" Apply Time Range/Performance
P2700 means the transmission friction element application needs attention, possibly because of a leak in the transmission or defective pump.

Curb hit

The most common parts that gets damage besides the rims and tires are: the spindles, axles, lower control arms, steering pitman arm, tie rods, ball joints, brake components, shocks, shock mounts, motor and transmission mounts, rear axle housings and axles,...

I have a coolant leak at the bypass pipe, where the hose from throttle body to the bypass pipe. 2000 Chevrolet Venture

Hi there - I suspect there is a tiny crack in the coolant bypass tube (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-coolant-tube) that is, against all odds, sealing itself as coolant temperature comes up. I recommend a coolant bypass tube replacement (https://www.yourmechanic.com/services/coolant-tube-replacement) by a mobile, professional...

My E350 is making a loud humming noise but it you can't hear it outside the car.

Hi There, This may be caused by a couple of different things such as a water pump (https://www.yourmechanic.com/services/water-pump-replacement) that may be starting to fail or possibly an alternator (https://www.yourmechanic.com/services/alternator-replacement) that is beginning to go bad. Either of these will produce...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com