Lexus ES250 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Lexus ES250 Fuel Injector Replacement is $1884 with $1548 for parts and $336 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Lexus ES250V6-2.5LService typeFuel Injector ReplacementEstimate$3467.10Shop/Dealer Price$4256.00 - $6588.66
1991 Lexus ES250V6-2.5LService typeFuel Injector ReplacementEstimate$3445.48Shop/Dealer Price$4226.95 - $6554.05
Show example Lexus ES250 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Sivi

18 years of experience
21 reviews
Sivi
18 years of experience
Lexus ES250 L4-2.5L - Pre-purchase Car Inspection - Keller, Texas
Great. Thoroughly done pre buying inspection

Patrick

34 years of experience
1579 reviews
Patrick
34 years of experience
Lexus ES250 V6-2.5L - Car is not starting - San Marcos, Texas
LOVE YourMechanic. He told me what he was doing, showed me what he was talking about. He didnt treat me like a "stupid woman" like most mechanics do. I felt very comfortable and safe with them. They gave me an estimate, sent me all the info in an email. I would totally use them again and recommend them to friends and family.

Daniel

12 years of experience
54 reviews
Daniel
12 years of experience
Lexus ES250 V6-2.5L - Brakes, Steering and Suspension Inspection - Sacramento, California
Excellent Service, Very Knowledgeable about His Work

Joseph

21 years of experience
718 reviews
Joseph
21 years of experience
Lexus ES250 V6-2.5L - Window is not going up or down - Salt Lake City, Utah
Nicest man, explained everything and was extremely knowledgeable about the problem. Will definitely call him for anything else.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Lexus ES250 services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Barometric Sensor Last?
The The barometric sensor (also called the barometric pressure sensor, or BAP) is one of a number of sensors on cars that have computer-controlled engines. All it does is measure atmospheric pressure, essentially the same way that a weather barometer...
How to Replace a License Plate Light
When a license plate light bulb goes out, it may be illegal in some states to drive in public. Here's a guide on how to replace it.
How to Replace a Fuel Injector
Fuel injectors are faulty if the smell of fuel is present in the vehicle, you have engine performance issues, or the check engine light comes on.

Oil coming from oil filter

If the filter is not tightened properly the vibrations of engine can work the filter loose over time. If you tightened the filter and it was still leaking that means that there was a problem with the seal on the...

EGR GAS RECIRCULATION SYSTEM VALVE 2

The color (black) is just a consequence of "carbon particles" that are normally present in the exhaust flow through the valve. We would need the exact Diagnostic Trouble Code ("DTC" as displayed on the Code Scanner) in order to advise...

Which fuse is electronically controlled with the iac , becuase i didnt see one fuse that said anything about the iac valveand when

Unless there is something visible like a vacuum leak through a cracked tube, to diagnose fluctuating idle speed a scan tool is essential to directly observe engine operating parameters. With regard to the idle air control valve, if you apply...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com