Land Rover LR2 Cruise control is not working Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(98)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(98)

Cruise control is not working Inspection Service

How much does a Cruise control is not working Inspection cost?

On average, the cost for a Land Rover LR2 Cruise control is not working Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Land Rover LR2L4-2.0L TurboService typeCruise control is not working InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2008 Land Rover LR2L6-3.2LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2011 Land Rover LR2L6-3.2LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2014 Land Rover LR2L4-2.0L TurboService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2010 Land Rover LR2L6-3.2LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2013 Land Rover LR2L4-2.0L TurboService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2012 Land Rover LR2L6-3.2LService typeCruise control is not working InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2009 Land Rover LR2L6-3.2LService typeCruise control is not working InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Land Rover LR2 Cruise control is not working Inspection prices

Cruise control can be very convenient when on a long drive or when on the highway. By setting a speed, you can relax your foot and let the vehicle maintain speed. More modern cruise control systems even allow you to maintain speed and a certain distance behind the vehicle in front of you. When cruise control fails, it can be annoying, but when it fails suddenly it may be dangerous. A sudden failure by the cruise control may mean your vehicle is rapidly decelerating. Even when cruise control is on, it is important to remain a vigilant driver.

How this system works:

Cruise control systems have changed as cars have become more modern. Newer cars use a fully electronic setup to maintain speed and may be able to maintain speed and distance behind the car in front of you. These systems are controlled through the vehicle’s computer or ECU (electronic control unit). Older cars may use what is called electromechanical cruise control. In this setup, a vacuum actuator is physically connected to the throttle by a cable or chain. The cable adjusts to increase or decrease throttle position based upon the actions of the actuator. A mechanic will let you know what kind of setup you have on your vehicle.

Common reasons for this to happen:

  • Bad Fuse: Like many electronically controlled systems in your car, the cruise control has a corresponding fuse which will blow to protect the system if it senses a short circuit. When the fuse of for the cruise control blows, the cruise control will stop working altogether.

  • Failing Brake Pedal Switch: The brake pedal switch turns on the vehicles brake lights when it senses that the brake pedal has been pressed. Because cruise control systems have been designed to disengage when the brake pedal is pressed, the cruise control is wired to the brake pedal switch. If the brake pedal switch fails, the car may think the brakes are engaged and not allow the cruise control system to turn on.

  • Failing Speed Sensor: A speed sensor has many purposes including indicating the speed of the vehicle, regulating flow of fuel and ignition timing, and operating the cruise control. If the speed sensor fails the cruise control may stop working. You may also notice that the speedometer has stopped working and the engine has more difficulty when idling.

  • Damaged Vacuum Actuator/Hoses/Cable: On older vehicles, cruise control speed is maintained using a vacuum actuator and a cable connected to the throttle. A vehicle’s cruise control may stop working if the vacuum actuator has stopped working or if there is damage to the vacuum hoses. The system may also fail if the cable linking the actuator to the throttle is broken.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s cruise control system has stopped working. The mechanic will then provide a detailed inspection report outlining the nature of the system failure and the cost of any repairs that need to be made.

How it's done:

The mechanic will first want to connect to the vehicle’s ECU through a code reader/scanner. This will allow the mechanic to read and trouble codes and better diagnose what component may have failed.

If the mechanic determines that there is a bad fuse, he or she will find the corresponding fuse for the cruise control system to see if it has failed. If the fuse has blown, the mechanic will remove it and replace it with a fuse rated for the correct amperage.

If the mechanic believes that the brake pedal switch has failed, he or she will examine the switch to check for any superficial damage. The mechanic should then check the wiring connected to the switch and change it if necessary. When the switch has been replaced, the mechanic should make sure that both the brake lights and the cruise control system are working properly.

To check the speed sensor, the mechanic will have to get underneath the vehicle. While underneath, the mechanic will find the sensor and examine it and the surrounding wires for damage. The mechanic will then replace the sensor and then check the wires going from the sensor up to the speedometer and cruise control switches to endure that they are not frayed.

If the mechanic believes that the vacuum actuator or the corresponding hoses and cable have failed, he or she will open the hood and locate the actuator. The mechanic will first check the hoses and cable to make sure that they are in good working order. He or she will then replace the actuator as necessary.

In all of these repair scenarios the mechanic will ask to test drive the vehicle to make sure that the cruise control is working properly. He or she should also use their code reader/scanner to clear any trouble codes that may have been produced when the cruise control system was not working.

How important is this service?

A failed cruise control system can be a signal that other repairs may need to be made soon. By examining the cruise control, the mechanic is likely to also inspect other systems on the car including the brake lights and speedometer. While driving without cruise control may be an inconvenience, a sudden failure of the cruise control system could be potentially dangerous for a driver who is not vigilant. If you notice that your vehicle’s cruise control has stopped working you should have a mechanic check it to determine the nature of the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Land Rover mechanics

Real customer reviews from Land Rover owners like you.

Excellent Rating

(98)

Rating Summary
91
7
0
0
0
91
7
0
0
0

Michael

16 years of experience
606 reviews
Michael
16 years of experience
Land Rover LR2 L6-3.2L - Brake Pads Replacement (Front) - Marietta, Georgia
Mike was polite, knowledgeable and friendly. A pleasure to with. Vin

Junard

11 years of experience
161 reviews
Junard
11 years of experience
Land Rover LR2 L6-3.2L - Car Starter Repair - Philadelphia, Pennsylvania
Junard got our car back up and running like new. He was prompt, extremely polite, and I will definitely use his services again.

Ben

41 years of experience
1416 reviews
Ben
41 years of experience
Land Rover LR2 L6-3.2L - AC is not working - Houston, Texas
Prompt, thorough and explained issues clearly. Highly recommended!

Chris

16 years of experience
419 reviews
Chris
16 years of experience
Land Rover LR2 L6-3.2L - Oil Change - South San Francisco, California
Chris is very comeptent

Excellent Rating

(98)

Rating Summary
91
7
0
0
0
91
7
0
0
0
Number of Land Rover LR2 services completed
1078+
services done by our mechanics
TOTAL NUMBER OF EXPERT Land Rover MECHANICS
500+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 Scion xB
If If you want an SUV because of the spacious interior, the 2012 Scion xB is a great choice. It’s easily one of the most affordable on the market. Key Features The four-cylinder power on the 2012 Scion xB may...
How to Get a Wyoming Driver's Permit
The The state of Wyoming uses a graduated driver’s license program which requires all new drivers under 17 years old to begin driving with a learner’s permit, in order to practice safe driving under supervision before getting their full driver’s...
How to Install Aftermarket Springs
Switching Switching out your stock springs (https://www.yourmechanic.com/article/how-long-do-suspension-springs-last) for aftermarket springs can have a huge impact on your car. Whether you’re going for a sporty feeling, or even just a different look by lowering the car, new springs can make your...

Flashing dashboard lights

The xeon type head lights will tend to flash or go dim and bright when they are going bad. Replace both front headlight bulbs (https://www.yourmechanic.com/services/headlight-bulb-replacement) at the same time. They will fail close to each other and one will be...

Hard to get into first gear

This may suggest failing transmission synchros. As you may know, when a clutch drags, it is not letting go of the disk fully which overloads the synchros and burns up the friction surfaces quickly. Synchros work by speeding up or...

P0300 & p1133

Inasmuch as the car was running fine before the work was done, the likeliest explanation is that the timing was belt was installed out of position, that is one tooth off. Such will cause the engine to run very badly,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com