Kia Amanti Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(80)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(80)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Kia Amanti Car Thermostat Replacement is $229 with $89 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Kia AmantiV6-3.8LService typeCar Thermostat ReplacementEstimate$366.80Shop/Dealer Price$423.35 - $584.90
2005 Kia AmantiV6-3.5LService typeCar Thermostat ReplacementEstimate$323.81Shop/Dealer Price$370.10 - $504.84
2006 Kia AmantiV6-3.5LService typeCar Thermostat ReplacementEstimate$323.81Shop/Dealer Price$370.12 - $504.88
2007 Kia AmantiV6-3.8LService typeCar Thermostat ReplacementEstimate$357.79Shop/Dealer Price$412.60 - $572.84
2009 Kia AmantiV6-3.8LService typeCar Thermostat ReplacementEstimate$357.79Shop/Dealer Price$414.07 - $575.42
2004 Kia AmantiV6-3.5LService typeCar Thermostat ReplacementEstimate$323.81Shop/Dealer Price$370.26 - $505.13
Show example Kia Amanti Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(80)

Rating Summary
71
4
0
0
5
71
4
0
0
5

Michael

25 years of experience
138 reviews
Michael
25 years of experience
Amanti 2004 - Check Engine Light is on - Noblesville, IN
Good experience. Knew what he was talking about. Would recommend to a friend or family member.

Jermaine

22 years of experience
147 reviews
Jermaine
22 years of experience
Amanti 2006 - Camshaft Position Sensor - Silver Spring, MD
Very curious and efficient

Rusty

0 years of experience
532 reviews
Rusty
0 years of experience
Amanti 2006 - Camshaft Position Sensor - Arlington, TX
Rusty did a great job. Done in about an hour and 30 minutes!! I will use him again.

Collins

8 years of experience
362 reviews
Collins
8 years of experience
Amanti 2007 - Power Steering Fluid Reservoir - Atlanta, GA
Real friendly guy and an excellent mechanic. Did great work

Excellent Rating

(80)

Rating Summary
71
4
0
0
5
71
4
0
0
5
Number of Kia Amanti services completed
880+
services done by our mechanics
TOTAL NUMBER OF EXPERT Kia MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Modify Your Car Payments Without Refinancing
A person’s financial situation can change while they are paying off a car loan (https://www.yourmechanic.com/article/how-to-quickly-pay-off-a-car-loan-by-patrick-haas), and if it changes for the worse, then it will be difficult to make the payments on time each month. This happens to many car...
How to Download a Chevy Owner’s Manual
When you buy a new car, you’re provided with original documents and books related to your vehicle. The materials you receive include: Your audio system operating information Your owner’s manual Your recommended maintenance schedule These manuals help you know how...
The Guide to Legal Car Modifications in Nebraska
ARENA Creative / Shutterstock.com If you live in Nebraska or plan to move to the state and you have a modified vehicle, you need to know the laws and regulations to make sure your car or truck...

What rear end will direct swap with a C200 rear end?

Hello and thank you for contacting YourMechanic. You can put any Nissan or Toyota axle on the vehicle. If you use a different rear axle, you will need to switch the yoke to match the drive shaft and you may...

Charging warning light comes on when i turn the key and try to start the car and the car want start but when someone tried to give

Hi there: If you recently replaced your battery, the issue may be caused by a malfunctioning alternator or other electrical component that comprises the charging system on your Nissan Sentra. The best way to find out which item specifically is...

I have a 2007 BMW 328XI and noticed that I was experiencing a load grinding noise when reversing and occasionally when turning. I

Hello, thank you for writing in. Without inspecting the vehicle, there is no way of knowing how badly the vehicle is damaged, nor how extensive the damage is. With that being said, the steering linkage and suspension are both susceptible...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com