Hyundai XG300 Windshield Wiper/Washer System Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Windshield Wiper/Washer System Inspection Service

How much does a Windshield Wiper/Washer System Inspection cost?

On average, the cost for a Hyundai XG300 Windshield Wiper/Washer System Inspection is $133 with $38 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Hyundai XG300V6-3.0LService typeWindshield Wiper/Washer System InspectionEstimate$190.75Shop/Dealer Price$219.69 - $284.01
Show example Hyundai XG300 Windshield Wiper/Washer System Inspection prices

The windshield wiper and washer system help keep a windshield clean and free of rain, dirt, sleet or snow. This system is not only a convenience but a safety system as well. Limited visibility due to a dirty windshield can make safe driving difficult or impossible.

There are a number of components in the wiper/washer system that can malfunction and cause problems. Everything from a blown fuse to a bad pump can leave a windshield dirty.

How this system works:

Windshield wipers use two different technologies to keep the windshield clean. An electric motor using a worm gear provides the power to move the wipers while a linkage converts the rotational output of the electric motor into the familiar back and forth motion of the wiper blades.

The windshield washer system uses a washer pump that is installed at the base of the washer fluid reservoir. The pump is activated by a spring-loaded switch, this switch turns on the wipers as well. The fluid is pumped through a rubber or plastic hose that runs up to windshield and separates in two lines that feed the washer nozzles on the hood of the car.

Common reasons for this to happen:

Windshield Wiper Issues

  • Worn wiper blades: Wiper blades need to be replaced on a regular basis. Worn wiper blades will not clean the windshield. Smearing or streaking are common symptoms of worn blades. If the blades chatter this can also indicate dirty or worn blades. Torn or cracking blades need to be replaced.

  • Bent or loose wiper arms: Wiper arms can become bent, usually due to vandalism. If the wiper blades are not cleaning the windshield but still appear to be in good shape loose or bent wiper arms could be the problem.

  • Malfunctioning wiper arm linkage: The linkage between the wiper motor and the blades can become damaged. The most common symptom of a broken linkage is one wiper arm not working.

  • Blown fuse: A blown fuse will cut off the electric current to the wiper motor. If both blades fail to function when turned on, a blown fuse is usually the starting point for a diagnosis.

  • Bad wiper motor: If the blades fail to operate at all, are operating slowly, only operate on one speed or do not stop in the correct position a bad or malfunctioning wiper motor could be the culprit. The motor will need to be repaired or replaced.

  • Defective wiper switch: If the wipers do not turn on when the switch is flipped, keep running after being switched off or it is impossible to select the proper speed settings the switch may be defective and will have to be replaced.

Windshield Washer Issues

  • No washer fluid: One of the most common reasons windshield washers fail to work is because the fluid reservoir is empty.

  • Blown fuse: Fuses provide overcurrent protection to all of the vehicle’s electrical units and this includes the windshield washer system. If a fuse blows, the electrical current to the washer pump will be cut off and the washer system will not work.

  • Bad windshield washer switch: The switch that turns on the windshield washer can malfunction and fail to send a signal to the pump. If this happens the pump will not work.

  • Broken washer pump: The electric pump that sends the fluid from the reservoir to the nozzles can malfunction or break.

  • Leaky washer tubes or bottle: The washer reservoir or the tubing that moves the fluid to the nozzles can crack or leak. This can lead to lost fluid on route to the nozzles, which can result in a weak spray or no spray at all.

  • Clogged washer tubes or nozzles: The tubing or the nozzles themselves can become clogged with debris. The nozzles, which are quite small can easily get clogged by dirt, leaves or other debris.

  • Frozen washer fluid: In extremely cold weather it is possible for washer fluid to freeze. If the fluid is frozen it should thaw as the car warms up.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the windshield wiper or washer system issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning windshield wiper or washer system is usually not a life or death situation but it should be addressed as soon as it is convenient. This can become a very real problem if the weather suddenly turns bad as limited visibility can make driving extremely dangerous.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(4)

Rating Summary
3
0
0
0
1
3
0
0
0
1

Juan

9 years of experience
309 reviews
Juan
9 years of experience
Hyundai XG300 V6-3.0L - Power Steering Pump - Orlando, Florida
Great job, let me know everything I needed to drive a safe vehicle! My power steering is smooth as butter

Joshua

13 years of experience
41 reviews
Joshua
13 years of experience
Hyundai XG300 V6-3.0L - Parking brake light stays on - Cary, North Carolina
Joshua was very informative about the work/maintenance on Hyundai vehicles. Provided information on where I could get future car maintenance done. Extremely satisfied with his expertise.

Daniel

11 years of experience
72 reviews
Daniel
11 years of experience
Hyundai XG300 V6-3.0L - Alternator - Chicago, Illinois
Awesome work

Robert

32 years of experience
191 reviews
Robert
32 years of experience
Hyundai Elantra L4-2.0L - Windshield Wiper/Washer System Inspection - Palo Alto, California
Rob was great! He showed up a bit early, navigated through my confusing parking lot, and serviced my car in record time! He gave me detailed advice and explained all aspects of his work and recommendations.

Excellent Rating

(4)

Rating Summary
3
0
0
0
1
3
0
0
0
1
Number of Hyundai XG300 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Buick Enclave
The The 2012 Buick Enclave was created specifically for younger buyers and those with growing families who have a taste for luxury. The Enclave is available in four levels which include: base, convenience, leather, and premium. It has ample room...
Symptoms of a Bad or Failing Windshield Wiper Arm
Common signs include paint flaking from the wiper arm, streaking on the windshield, wipers chattering, and wiper blades not touching the windshield.
How to Replace a Radiator Drain Cock
The radiator drain plug goes bad when the oil pressure is lower than normal, there is leaking coolant, or the Check Engine Light is on.

Car sputters in First or Second gear

The wet weather was a good hint toward an ignition misfire. The water will make the spark plugs and wires too short to ground. You would most likely be able to hear a snapping noise from the plug wires in...

Can a gasket leak from the intake leak air into the cooling system?

Hi there. An intake gasket leak would allow unmeasured air into the intake and create a lean condition, not an overheating issue. Base on what you've described, it sounds like you may have a leaking cylinder head gasket. Adding sealants...

The check engine light is on and my car sounds loud when it I crank it up. What could be the cause?The exhaust got fix but still l

Hello, thank you for writing in. With the check engine light on, we need to start by scanning the vehicle for diagnostic codes to find out why that light is on. We can use the codes to help point us...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com