Hummer H3T Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(11)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Hummer H3T Brake Pad Replacement is $169 with $74 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Hummer H3TV8-5.3LService typeBrake Pads - Front ReplacementEstimate$331.02Shop/Dealer Price$383.79 - $506.07
2010 Hummer H3TL5-3.7LService typeBrake Pads - Rear ReplacementEstimate$242.03Shop/Dealer Price$288.81 - $406.60
2009 Hummer H3TL5-3.7LService typeBrake Pads - Rear ReplacementEstimate$299.02Shop/Dealer Price$351.81 - $474.11
2010 Hummer H3TV8-5.3LService typeBrake Pads - Rear ReplacementEstimate$242.03Shop/Dealer Price$288.79 - $406.56
2009 Hummer H3TV8-5.3LService typeBrake Pads - Rear ReplacementEstimate$299.02Shop/Dealer Price$351.84 - $474.16
2010 Hummer H3TL5-3.7LService typeBrake Pads - Front ReplacementEstimate$242.03Shop/Dealer Price$288.81 - $406.60
2009 Hummer H3TL5-3.7LService typeBrake Pads - Front ReplacementEstimate$307.02Shop/Dealer Price$359.59 - $481.73
2010 Hummer H3TV8-5.3LService typeBrake Pads - Front ReplacementEstimate$247.03Shop/Dealer Price$294.04 - $412.02
Show example Hummer H3T Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hummer mechanics

Real customer reviews from Hummer owners like you.

Excellent Rating

(11)

Rating Summary
10
1
0
0
0
10
1
0
0
0

Colby

14 years of experience
66 reviews
Colby
14 years of experience
Hummer H3T L5-3.7L - Exterior Door Handle Replacement (Passenger Side Front) - Longmont, Colorado
Great service, quick and efficient. Wrong color door handle but I agreed to have it installed because I will paint it in the future.

Maxwell

18 years of experience
390 reviews
Maxwell
18 years of experience
Hummer H3 L5-3.7L - Brake Pads Replacement (Front) - Houston, Texas
Awesome and easy to talk about what going on my truck.

Brikk

18 years of experience
389 reviews
Brikk
18 years of experience
Hummer H3 L5-3.7L - Brake Pads Replacement (Front, Rear) - Charlotte, North Carolina
Had a very positive experience with brikk he was very efficient and we would use him again and recommend to others

Lucas

21 years of experience
885 reviews
Lucas
21 years of experience
Hummer H2 V8-6.0L - Brake Pads Replacement (Front, Rear) - Los Angeles, California
Lucas was awesome, he was very knowledgeable and worked quickly. Te end result was like new. If I need service on any of my vehicles Lucas is for sure my guy. First time using the service and Im glad I found it.

Excellent Rating

(11)

Rating Summary
10
1
0
0
0
10
1
0
0
0
Number of Hummer Brake Pad Replacement services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hummer MECHANICS
200+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Throttle Position Sensor
Common signs include lacking power when accelerating, rough or slow idle, stalling, inability to shift up, and the Check Engine Light coming on.
P2273 OBD-II Trouble Code: O2 Sensor Signal Stuck Rich Bank 2 Sensor 2
P2273 P2273 code definition The P2273 diagnostic trouble code is an indication that the Bank 2 Sensor 2 oxygen (O2) sensor signal is stuck on rich. Related Trouble Codes: P2270 OBD-II Trouble Code: O2 Sensor Signal Stuck Lean Bank 1...
P2616 OBD-II Trouble Code: Camshaft Pos Signal Output Circuit High
P2616 means the camshaft position sensor has released a high output signal due to a faulty, broken or shorted wiring, or fluid contamination.

getting heated fastly and smoke is coming out can i drive with this problem for 30 miles by pouring water

If you are having an overheating problem and have leaks, then I suggest you have a mobile mechanic come to you or have a tow truck transfer the car. If you try and drive it, you may overheat the engine...

My car won't start back up after idling and won't read codes

With the car idling for an extended period, your engine compartment will get extra hot and this may cause the ignition module to fail, resulting in a stalled engine that will not restart. In order to determine whether the ignition...

O2 sensor or EGR valve?

Hi There, There are a few situations that may cause the O2 sensor to produce a false reading. As you may know the [oxygen sensors]((https://www.yourmechanic.com/services/oxygen-sensor-replacement) which are part of your emissions system read exhaust gases to determine whether or not...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com