GMC Sierra 1500 HD Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a GMC Sierra 1500 HD Brake Master Cylinder Replacement is $351 with $169 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 GMC Sierra 1500 HDV8-6.0LService typeBrake Master Cylinder ReplacementEstimate$648.92Shop/Dealer Price$740.85 - $1000.44
2005 GMC Sierra 1500 HDV8-6.0LService typeBrake Master Cylinder ReplacementEstimate$595.35Shop/Dealer Price$699.12 - $1005.08
2002 GMC Sierra 1500 HDV8-6.0LService typeBrake Master Cylinder ReplacementEstimate$630.90Shop/Dealer Price$719.35 - $976.33
2006 GMC Sierra 1500 HDV8-6.0LService typeBrake Master Cylinder ReplacementEstimate$595.35Shop/Dealer Price$699.15 - $1005.13
2003 GMC Sierra 1500 HDV8-6.0LService typeBrake Master Cylinder ReplacementEstimate$551.33Shop/Dealer Price$646.04 - $920.45
Show example GMC Sierra 1500 HD Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Lavell

29 years of experience
405 reviews
Lavell
29 years of experience
GMC Sierra 1500 HD V8-6.0L - Check Engine Light is on Inspection - Orinda, California
Lavell was great, very knowledgeable and contextualized his findings so I could understand not just what he found, but also the corresponding implications.

Bryant

13 years of experience
638 reviews
Bryant
13 years of experience
GMC Sierra 1500 HD V8-6.0L - Car Starter Repair - Indianapolis, Indiana
Great job on my truck

Scott

37 years of experience
995 reviews
Scott
37 years of experience
GMC Sierra 1500 HD V8-6.0L - Fan Clutch - Gilbert, Arizona
On time , fast clean work and great service.

Bryant

13 years of experience
638 reviews
Bryant
13 years of experience
GMC Sierra 1500 HD V8-6.0L - Car AC Repair - Indianapolis, Indiana
Great Mechanic Knows his stuff Worth the cost

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of GMC Sierra 1500 HD services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

The Guide to Legal Car Modifications in Utah
ARENA Creative / Shutterstock.com Whether you live in or plan to move to Utah and you have a modified vehicle, you need to make sure that it conforms to the laws throughout the state. The following information...
Symptoms of a Bad or Failing Distributor Rotor and Cap
Common signs include engine misfires, car not starting, the Check Engine Light coming on, and excessive or unusual engine noises.
Rules of the Road For Alaska Drivers
While While most drivers understand the basic rules of the road since many of them are based on common sense, each state has different rules. The following are some of the road rules for Alaska drivers that may be different...

Failing fuses, dashboard warnings all present - 2012 Audi A7 Quattro

Your Audi utilizes an electrical power distribution system which is more computer network like, than older point-to-point wiring systems. There are electrical controllers at key locations in the vehicle (front or back) which distribute power to components located close by,...

Helicopter noise, steering wheel vibration. Had CV axles and wheel bearing replaced, but the noise is still there. What's wrong?

Hello, thanks for writing in. This sounds like you have tires that are not wearing correctly due to the alignment is not correct or has not had rotations and the tires have high ridges on the tread. Have the tires...

I put power steering fluid in my car and now my car is smoking I don't know if it needs an oil change or is low on oil or transmis

With the engine off you should first using soapy water brush and clean area where fluid was spilled. Then rinse off soap. If you still cannot remove oils then have a professional steam clean off engine for you so the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com