GMC K3500 Steering wheel feels loose Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Steering wheel feels loose Inspection Service

How much does a Steering wheel feels loose Inspection cost?

On average, the cost for a GMC K3500 Steering wheel feels loose Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 GMC K3500V8-5.7LService typeSteering wheel feels loose InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1997 GMC K3500V8-6.5L Turbo DieselService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1986 GMC K3500V8-7.4LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1984 GMC K3500V8-7.4LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1981 GMC K3500V8-7.4LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1980 GMC K3500V8-7.4LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1995 GMC K3500V8-5.7LService typeSteering wheel feels loose InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1981 GMC K3500L6-4.8LService typeSteering wheel feels loose InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC K3500 Steering wheel feels loose Inspection prices

A steering wheel that feels loose or has “play” in it prevents the driver form getting an accurate interpretation of how the wheels are turned. Any steering setup where you can move the wheel more than one to one and a half inches without moving the wheels is too lose and may have an issue. When the steering wheel feels loose it can be difficult from drivers to accurately know the position of the front wheels. This lack of responsiveness can be dangerous for drivers, especially in heavy traffic or winding roads.

How this system works:

The majority of modern vehicles use two different kinds of steering setup to help control the movement of the car. Rack and pinion steering is typically used on cars, small trucks and SUVs, while recirculating-ball steering is used on large SUVs and trucks. The similarities and differences in the two systems begin to manifest themselves when components fail, causing the steering wheel to feel loose.

Common reasons for this to happen:

  • Worn Tie Rods: Tie rods serve as the driver’s connection between the steering unit and the tires. Tie rods are present in both rack and pinion and recirculating ball setups. If tie rod ends become worn, they may cause the steering wheel to feel loose. A vehicle with worn tie rods may also squeak as the steering wheel is turned and be out of alignment.

  • Worn Pitman Arm: A pitman arm is only present in vehicles with recirculating-ball steering. The pitman arm connects a gear attached to the steering wheel to the steering rack itself. When the pitman arm becomes worn or the teeth in the gear connecting the pitman arm begin to slip, it can cause the steering wheel to feel loose.

  • Worn Ball Joint: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Depending on the vehicle, one or two ball joints per wheel and may or may not be load bearing. A ball joint that is worn may cause the steering to feel loose and may also create a banging sound, especially when going over bumps.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the loose-feeling steering. The mechanic will then provide a detailed inspection report outlining the reason for the loose steering and the cost of any repairs that need to be made.

How it's done:

When the mechanic arrives, he or she will first lift the vehicle and remove the wheels so that they can better access the suspension and steering components. From here, the mechanic will be able to assess the reason why the steering has become loose.

If the mechanic suspects that worn tie rods may be the issue, he or she will inspect the tie rod for superficial damage. If the tie rod end had become worn or loose, the mechanic will remove it and replace it with a new one. The mechanic will also ensure after installation, that the new tie rod end is properly lubricated.

If the mechanic believes that the pitman arm has become worn, he or she will remove the pitman arm from the track bar and replace it with a new pitman arm. The mechanic should ensure that the new part is properly tightened.

If the mechanic suspects worn ball joints, he or she will remove the control arm(s) in order to access the faulty ball joint. He or she will then remove the old ball joint and replace it with a new one. The mechanic should also ensure that the new ball joint is properly lubricated in order to ensure longer life.

In the case of all repairs the mechanic will make sure that all the new parts have been installed correctly and are properly lubricated. In order to ensure that the steering is working properly, the mechanic may test drive the vehicle to check for excess play.

How important is this service?

A steering wheel that feels loose may not be giving an accurate indication of the front wheel’s position. Loose-feeling steering may also indicate that a problem has occurred with the steering unit or suspension. If you notice that the steering does not seem to be as responsive, you should stop driving the vehicle and have it inspected by a mechanic.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Alex

20 years of experience
138 reviews
Alex
20 years of experience
GMC K3500 V8-7.4L - Starter - Glen Ellyn, Illinois
Extremely professional and well versed in auto mechanics. Explained things simply and was able answer my questions clearly

Theodore

16 years of experience
1610 reviews
Theodore
16 years of experience
GMC K3500 L6-4.8L - Battery - Bellevue, Washington
Hes awesome, super helpful every time!

Francisco

10 years of experience
174 reviews
Francisco
10 years of experience
GMC K3500 V8-6.5L Turbo Diesel - Battery - Portland, Oregon
Francisco was great. Not a super complicated service this time, but he was very thorough and helpful. Thanks

Darwin

23 years of experience
15 reviews
Darwin
23 years of experience
GMC G2500 V8-5.0L - Steering wheel feels loose - Santa Barbara, California
Darwin was friendly, took time to explain everything that he had done, and provided detailed recommendations for future service. I will definitely book him in the future.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of GMC Steering wheel feels loose Inspection services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P3400 OBD-II Trouble Code: Cylinder Deactivation System Bank 1
P3400 trouble code definition The P3400 diagnostic trouble code indicates that there is a performance issue with the Cylinder Deactivation System in...
How to Ship a Car From Japan
There are some very different, unique vehicles in Japan that aren’t offered in the American marketplace. There are: Compact trucks (https://www.yourmechanic.com/article/5-essential-things-to-know-before-buying-a-truck) Versatile SUVs Performance sports cars Luxury sedans You may want to drive something that is one-of-a-kind in your area...
P2273 OBD-II Trouble Code: O2 Sensor Signal Stuck Rich Bank 2 Sensor 2
P2273 P2273 code definition The P2273 diagnostic trouble code is an indication that the Bank 2 Sensor 2 oxygen (O2) sensor signal is stuck on rich. Related Trouble Codes: P2270 OBD-II Trouble Code: O2 Sensor Signal Stuck Lean Bank 1...

Blinker clicks too fast

The blinker issue is likely a burnt out bulb or a flasher relay. You can turn on your flashers/hazards to verify bulb operation. If all the bulbs work then you may need a new flasher relay. A left mirror wiggle...

Thumping and shaking noises - 2013 Jaguar XK

If you are feeling this "shaking" through the steering wheel as well as "seat of the pants", it is likely your tires. While siting overnight, especially in cold weather, they develop a short-term "flat spot" where the tire rests on...

Do i need to reset my vehicle after replacing my coolant sensor

If you have a check engine light that is still on then you may need to have the computer scanned to make sure that there was no other codes or damaged from the overheating situation you had. You may need...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com