Geo Prizm Distributor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(45)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(45)

Distributor Replacement Service

How much does a Distributor Replacement cost?

On average, the cost for a Geo Prizm Distributor Replacement is $476 with $336 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Geo PrizmL4-1.6LService typeDistributor ReplacementEstimate$827.78Shop/Dealer Price$999.58 - $1506.86
1997 Geo PrizmL4-1.8LService typeDistributor ReplacementEstimate$888.51Shop/Dealer Price$1075.97 - $1634.24
1993 Geo PrizmL4-1.6LService typeDistributor ReplacementEstimate$818.77Shop/Dealer Price$988.82 - $1494.80
Show example Geo Prizm Distributor Replacement prices

What is a distributor and how does it work?

The distributor is an electro-mechanical component installed in a car’s ignition system to provide, time, and “distribute” the spark that occurs at each spark plug in an engine’s combustion cylinders. The distributor contains a rotating shaft with a gear at the bottom that engages a gear on the engine’s camshaft. Atop the shaft is a plastic rotor that has electrical contacts molded in. As the plastic rotor turns, it completes a high voltage circuit to each electrical contact, one per engine cylinder, that is molded into a plastic distributor cap. That high voltage then flows along the spark plug wire to the spark plug, creating the spark that ignites the air-fuel mixture in an engine cylinder.

Distributors vary in design: some may have the ignition coil built in, some have vacuum advance mechanisms attached for engine timing, and really old distributors may even have mechanical points. Vintage cars, that is cars older than 25 years, will more commonly be equipped with a distributor. Most modern car designs have replaced the distributor with fully electronic systems controlled by engine sensors for more precise, and more powerful, ignition system operation.

When to consider replacing the distributor:

  • Worn or damaged integral parts. Worn shaft bushings can result in wobbling or eccentric rotation of the rotor, resulting in misfires, loss of power, rough idle and poor mileage. If the shear pin breaks that secures the distributor shaft drive gear, complete loss of ignition spark distribution is the result. A failed ignition module that is mounted to the distributor housing may also be more cost-performance efficient to replace the entire distributor.
  • Visible oil leaks. Distributors are attached to the engine and consequently, there are seals, both internal and external, that keep oil from leaking at the point of attachment. External O-rings are serviceable but if an internal oil leak occurs, due to a worn shaft, for example, it might necessitate rebuilding or replacing the distributor.

How do mechanics replace the distributor?

Distributors are bolted to the engine block or the cylinder head. The replacement procedure is as follows:

  • Once all diagnostic tests are complete and the distributor is confirmed to be faulty, disconnect the battery negative cable.
  • Set engine at top dead center on the compression stroke for cylinder no. 1. Mark location of distributor housing and shaft relative to the engine mounting surface.
  • Remove primary and secondary ignition system wiring connected to the distributor. Unbolt and remove the distributor. Temporarily cover the hole in the head or block so no foreign matter drops into the engine.
  • Install new distributor and new cap and rotor, with the rotor pointing to the cylinder no. 1 firing-order electrode of the distributor cap. Reconnect all wiring and reconnect battery negative cable.
  • Start engine and set basic engine ignition timing per original equipment manager specification. Then check timing advance for proper function. Road test vehicle.

Is it safe to drive with a distributor problem?

Yes. A faulty distributor will cause increased fuel consumption, increased emissions and poor engine operation but does not generally create a safety hazard.

When replacing a distributor keep in mind:

  • Many ignition system failures will mimic a distributor failure, including faulty spark plugs, faulty wiring, and a worn cap and rotor. Mechanics will always test the distributor directly to ensure it is not needlessly replaced.
  • If a distributor is removed for testing and then re-installed, be sure that new o-rings are installed. Re-using old o-rings often results in oil leaks.
  • If the distributor is replaced, and the spark plugs and spark plug wires have considerable mileage on them, the best results will be obtained by replacing those components at the same time the new distributor is installed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Geo mechanics

Real customer reviews from Geo owners like you.

Excellent Rating

(45)

Rating Summary
40
4
0
0
1
40
4
0
0
1

Faraz

23 years of experience
142 reviews
Faraz
23 years of experience
Geo Prizm L4-1.6L - Distributor - San Ramon, California
Awesome honest texhinci.

Grzegorz

42 years of experience
473 reviews
Grzegorz
42 years of experience
Geo Prizm L4-1.6L - Car is idling unevenly occasionally. When it is not idling properly it sounds like it has a flat tire, it knocks (?) Otherwise it runs smoothly and quietly. But when it doesn't, it is very disconcerting. (Inspection of engine noise) - Daly City, California
Mechanics that make home visits is a great find.

Frank

28 years of experience
66 reviews
Frank
28 years of experience
Geo Prizm L4-1.6L - Car is not starting - Denver, Colorado
Handsome,honest and on time! Only took ten minutes pin point problem!

William

19 years of experience
90 reviews
William
19 years of experience
Geo Prizm L4-1.6L - Starter - Chicago, Illinois
William is a great guy. He was on time and knew what he was doing. After replacing a few things in my car myself, I knew I needed a new starter. William replaced the starter in my car, which was a hard job. He did a great job and my car started. I would definitely recommend William and will be using him again in the future.

Excellent Rating

(45)

Rating Summary
40
4
0
0
1
40
4
0
0
1
Number of Geo Prizm services completed
495+
services done by our mechanics
TOTAL NUMBER OF EXPERT Geo MECHANICS
70+
experts on our platform

Recent articles & questions

How to Register a Car in Utah
Moving Moving to a new area comes with a lot of challenges that you will have to meet head on to avoid getting overwhelmed. Utah is among the most popular states in the country due to the great weather and...
Windshield Laws in South Carolina
Drivers Drivers in South Carolina know they are required to follow many different traffic laws when traveling the roadways throughout the state. However, there are also additional regulations concerning the safety and integrity of the equipment on the vehicle. The...
How Do Headlight Wipers Work?
Headlight Headlight wiper systems are only seen on a very small portion of vehicles on the road today, which is why most people aren’t aware of how they operate. Their purpose is simply to provide a clean headlight lens for...

My car has a fuel injector problem, how can I free myself from this problem?

Hi there: In most cases, the symptoms you're describing are related to fuel delivery problems; with components such as the Mass Airflow Sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement), TPS (Throttle Position Sensor) (https://www.yourmechanic.com/services/throttle-position-sensor-replacement), or the throttle body (https://www.yourmechanic.com/services/throttle-body-replacement) itself being damaged, having faulty connections...

I have an oil leak coming from the passenger side of my 2003 Audi a4 quattro 1.8 . What would be the reason for the leak?

It could be as simple as a valve cover gasket, or as complicated as a turbocharger. Because of the way the engine is oriented in your car, there are several types of oil leaks that can end up on the...

What starter is compatible for a 1999 Lincoln Navigator

A starter from same engine in an F series truck or Expedition with the 5.4 will have the same starter as yours. I would not go more than 1 year up or down to make sure of fit but they...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com