Ford Transit-350 HD Ignition Switch Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(9)

Ignition Switch Replacement Service

How much does a Ignition Switch Replacement cost?

On average, the cost for a Ford Transit-350 HD Ignition Switch Replacement is $268 with $128 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Ford Transit-350 HDV6-3.7LService typeIgnition Switch ReplacementEstimate$410.90Shop/Dealer Price$478.48 - $673.10
2018 Ford Transit-350 HDL5-3.2L Turbo DieselService typeIgnition Switch ReplacementEstimate$401.89Shop/Dealer Price$467.70 - $661.00
2018 Ford Transit-350 HDV6-3.5L TurboService typeIgnition Switch ReplacementEstimate$401.89Shop/Dealer Price$467.72 - $661.04
Show example Ford Transit-350 HD Ignition Switch Replacement prices

What is the Ignition Switch all about?

The ignition switch, located on the steering column or in the dashboard, takes the power from the battery and directs it to all the accessories and electrical components of your car. It also transfers the power to the starter when you turn the ignition key. If the starter does not receive power from the ignition key, the car will not start. When the ignition switch goes bad, your car may not start and the accessories (lights, radio, etc.) may not work. Replacing an ignition switch can be as simple as removing a few screws to access the ignition switch, or as complicated as removing the whole steering column.

Ignition Switch

Keep in mind:

  • After an ignition switch is replaced, all electrical components should be checked to ensure proper operation.

How it's done:

  • Check the condition of the ignition switch.
  • Remove and replace the ignition switch if it is bad.
  • Verify operation of electrical components.

Our recommendation:

The battery feeds power to ignition switch, so it is important for the ignition system that the battery is in good condition. Don't put too much weight on your key ring because this can damage the key and the tumbler part of the ignition switch. If there is no power inside the car (none of the electrical components are working), have the mechanic inspect the main fuses. If the fuses are good, then the mechanic should inspect the ignition switch and other electrical components.

What common symptoms indicate you may need to replace the Ignition Switch?

  • Car may not start.
  • Car starts then dies.
  • Some electrical components may not work (radio, clock, lights, etc.).

How important is this service?

The ignition switch serves to send power from the battery. When you turn your key to turn on your vehicle, the ignition switch takes power from the battery and sends it to the starter, which allows your vehicle to turn on. When you turn on any electrical components in your vehicle (such as your lights, radio, and air conditioning), the ignition switch draws power from the battery, and sends it to these electrical components to power them. When your ignition switch stops working, your starter and your electrical components have no way of drawing power from your battery. With a faulty ignition switch, you won’t be able to use your radio, lights, or air conditioning, and you won’t be able to turn on your vehicle. In extreme cases, a broken ignition switch won’t allow you to turn your vehicle off, even if you remove the key.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0

Benji

23 years of experience
309 reviews
Benji
23 years of experience
Ford Transit-350 HD V6-3.7L - Brake Pads Replacement (Front, Rear) - Phoenix, Arizona
Great mechanic, very knowledgeable, didn't cut corners did the job right.

Andrew

12 years of experience
962 reviews
Andrew
12 years of experience
Ford Transit-350 HD V6-3.5L Turbo - Brake Pads Replacement (Front) - Kansas City, Missouri
Very easy process, courteous and respectful.

Matthew

34 years of experience
1438 reviews
Matthew
34 years of experience
Ford Transit-350 HD V6-3.5L Turbo - Oil Change - Williamsburg, Virginia
Matthew is riendly, honest, and efficient! This was a great experience!

Anthony

8 years of experience
195 reviews
Anthony
8 years of experience
Ford Transit-350 HD V6-3.7L - Oil Change - El Macero, California
Anthony has worked on 3 different vehicles for me. Excellent job on all three!!!!

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0
Number of Ford Transit-350 HD services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Clutch Cable
If your manual car's transmission is slipping out of gear or clutch pedal is hard or sinking to the floor, you may have to replace the clutch cable.
Industry News for Automotive Techs: September 17-23
Michigan is sued over dealer licenses, new self-driving car policies, introduction to ADAS diagnosis, and Tesla safety concerns are the top stories.
How to Buy a Good Quality Cooling System Flush
Your Your radiator does the important job of helping to keep the engine cool. Overheating can cause serious, expensive damage like a blown head gasket (which typically requires complete engine replacement) or warped cylinders. The radiator circulates and cools the...

POWER indicator on dash

Hello. The power light on the dashboard is not actually a warning light, it is an indicator that the vehicle is in "Power" mode. When in power mode the vehicle will have increased performance and power, useful for climbing hills...

Need estimate on blown head gasket repair for 1996 s10 4.3 v6

Head gasket replacement sometimes requires machine shop work. If the head and block are not flat within an incredibly tiny tolerance (often .002 inches), it's a waste of time to replace the gasket as it will just leak anew. So,...

My vehicle will crank, but won't start.I have changed the crank sensor, the cam sensors, the fuel pump, and the spark plugs.

You need to do a systematic diagnosis. Trying to fix a car by replacing parts until it works again can be a lot of work and very expensive. Look under the hood for any air hoses or vacuum lines that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com