Ford Freestyle AC Condenser Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(98)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(98)

AC Condenser Replacement Service

How much does a AC Condenser Replacement cost?

On average, the cost for a Ford Freestyle AC Condenser Replacement is $627 with $323 for parts and $304 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Ford FreestyleV6-3.0LService typeAC Condenser ReplacementEstimate$1014.67Shop/Dealer Price$1208.35 - $1717.38
2005 Ford FreestyleV6-3.0LService typeAC Condenser ReplacementEstimate$950.67Shop/Dealer Price$1144.40 - $1653.48
2006 Ford FreestyleV6-3.0LService typeAC Condenser ReplacementEstimate$950.67Shop/Dealer Price$1144.40 - $1653.47
Show example Ford Freestyle AC Condenser Replacement prices

What is the AC Condenser all about?

The AC system has many key components: compressor, condenser, receiver dryer, evaporator, and hoses. For an AC system to work, it needs a gas or liquid substance called refrigerant (R-12 in older cars, R-134a in 1995 and newer cars). The job of an AC condenser is to convert the AC gas into a liquid form by cooling it.

There are two common causes of condenser failure. The first scenario occurs when the condenser starts leaking. The condenser has tubes and seals, both of which can leak with normal wear and tear. Since there is no way to replace these tubes and seals, you will need a new condenser. Keep in mind this can also be caused by physical damage as the condenser is mounted near the front of the car and as such is susceptible to rocks or other road debris.

In the second scenario, the condenser is unable to circulate the refrigerant due to metallic debris blockage. This debris is often the result of a failing or defective AC compressor where internal parts of the compressor come apart and disperse metallic debris throughout the system. If this is the case, you will not only need a new condenser, but also a new AC compressor, orifice tubes, and receiver dryer.

Keep in mind:

  • When the AC condenser is replaced, the compressor, orifice tubes, and receiver dryer often have to be replaced as well.
  • Any refrigerant that has not leaked out will need to be vacuumed out.

How it's done:

  • Install an AC gauge set to measure the pressure.
  • Inspect the condenser for leaks.
  • If condenser is bad, remove all of the refrigerant.
  • Remove and replace condenser.
  • Evac and recharge the AC system.
  • Leak check for any system leaks.
  • Check for proper operation of the AC system.

Our recommendation:

The AC system is a sealed unit. It is not something you will inspect or service unless you notice a change. If you notice a change in the temperature of the air through the AC vents (not as cold as it should be), schedule an inspection.

What common symptoms indicate you may need to replace the AC Condenser?

  • Air conditioning is not as cold as it should be.
  • Air conditioning does not work at all.

How important is this service?

In addition to your comfort, air conditioning systems add value to your vehicle. You should keep your AC fully operational. In some systems, the hot and cold air are blended to achieve the desired temperature setting. In these cases, when the AC system fails, you will not only not get any cold air, but the entire temperature regulation is thrown off.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(98)

Rating Summary
91
3
0
2
2
91
3
0
2
2

Allen

36 years of experience
471 reviews
Allen
36 years of experience
Ford Freestyle V6-3.0L - Ignition Coil - Casselberry, Florida
Allen was great from start to finish. He arrived early, he finished the work under the quoted time, and my car is running well again.

James

30 years of experience
873 reviews
James
30 years of experience
Ford Freestyle V6-3.0L - Check Engine Light is on - Orlando, Florida
Excellent!! Will definitely use him again in the future!!

Jesus

12 years of experience
10 reviews
Jesus
12 years of experience
Ford Freestyle V6-3.0L - Spark Plugs - Columbia, South Carolina
He was absolutely wonderful, so friendly and very kind, knowledgeable

David

42 years of experience
220 reviews
David
42 years of experience
Ford Freestyle V6-3.0L - Brake Pads Replacement (Rear) - Decatur, Georgia
David was awesome. He worked hard and found a timely solution even when the problem was bigger than initially anticipated. Professional and just good people.

Excellent Rating

(98)

Rating Summary
91
3
0
2
2
91
3
0
2
2
Number of Ford Freestyle services completed
1078+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How Long Does a Backup Light Switch Last?
Your Your vehicle’s backup lights serve a couple of very important purposes. They not only let other drivers (and pedestrians as well) know that you are backing up your car, they also give you a certain degree of visibility if...
Top 5 Reasons to Be a Mobile Technician
Automotive technician jobs can be a great career choice. Find out if a mechanic job as a mobile technician is right for you.
How to Lubricate Your Car's U-Joints
U-joints allow the driveshaft to keep up with the movements of your car's suspension system. Keeping them lubricated will prevent wear and noise.

Do I need a special tool to change the rear brakes on a 2004 Cadillac Deville?

The only special tool that is really needed is a caliper piston return tool. You can watch a good YouTube video on this here (https://www.youtube.com/watch?v=rlMU8K36Hjo). This tool comes in several forms and most are available for rent from your local...

What could be causing my steering wheel to jerks from left to right?

Hi there. Check to see that all of the connections are tight. Grease up the ball joints (https://www.yourmechanic.com/services/lubricate-ball-joints) to make sure that they are lubricated. If all of the parts are tight that you installed, then go over to the...

My interior rear-view mirror broke off... How can i re-attach it or is it even possible?

Hello, thank you for writing in. The mirror will can be reattached. The main question is if you can remove the part of the clip that is broken from the mirror itself. If you cannot, you may be in a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com