Ford F-250 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(122)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(122)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Ford F-250 Power Steering Pressure Hose Replacement is $148 with $53 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1966 Ford F-250L6-4.9LService typePower Steering Pressure Hose ReplacementEstimate$268.65Shop/Dealer Price$317.07 - $439.81
1998 Ford F-250V8-4.6LService typePower Steering Pressure Hose ReplacementEstimate$237.21Shop/Dealer Price$278.66 - $373.72
1981 Ford F-250V8-6.6LService typePower Steering Pressure Hose ReplacementEstimate$200.53Shop/Dealer Price$236.93 - $323.60
1983 Ford F-250V8-6.9L DieselService typePower Steering Pressure Hose ReplacementEstimate$417.15Shop/Dealer Price$506.31 - $749.05
1993 Ford F-250V8-7.3L Turbo DieselService typePower Steering Pressure Hose ReplacementEstimate$229.51Shop/Dealer Price$271.80 - $373.84
1969 Ford F-250V8-5.0LService typePower Steering Pressure Hose ReplacementEstimate$296.29Shop/Dealer Price$356.63 - $515.12
1987 Ford F-250V8-6.9L DieselService typePower Steering Pressure Hose ReplacementEstimate$422.65Shop/Dealer Price$511.68 - $754.33
1978 Ford F-250V8-7.5LService typePower Steering Pressure Hose ReplacementEstimate$226.73Shop/Dealer Price$268.67 - $371.42
Show example Ford F-250 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(122)

Rating Summary
113
4
0
1
4
113
4
0
1
4

Charles

26 years of experience
134 reviews
Charles
26 years of experience
Ford F-250 V8-7.5L - Spark Plugs - Seattle, Washington
He arrived early, was timely and very nice. Great Job!

Jerome

24 years of experience
415 reviews
Jerome
24 years of experience
Ford F-250 V8-6.4L - Oil Change - Baltimore, Maryland
Worked in a timely fashion

Carlos

17 years of experience
57 reviews
Carlos
17 years of experience
Ford F-250 V8-7.5L - Car is not starting - Tracy, California
Very knowledgeable and informative.

Kenneth

20 years of experience
775 reviews
Kenneth
20 years of experience
Ford F-250 V8-5.0L - Car is not starting - Los Angeles, California
Outstanding insights into all things inside the engine. Outstanding service. Dependable and good natured.

Excellent Rating

(122)

Rating Summary
113
4
0
1
4
113
4
0
1
4
Number of Ford F-250 services completed
1342+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Fuel Filler Neck
Common signs include a fuel smell coming from the car, the Check Engine Light coming on, and fuel leaks.
P2300 OBD-II Trouble Code: Ignition Coil A Primary Control Circuit Low
P2300 means the battery voltage sent to the ignition coil is not correct due to faulty coil, circuit wires, or faulty PCM .
How to Replace an Instrument Voltage Regulator
The instrument cluster has a voltage regulator that fails when the panel is dim or flickering, reads erratically, or is totally inoperable.

TPMS alarm went off, as well as all gauge lights

Hello. Since your car is relatively new, it should still be under warranty. It is apparent to me that there is an electrical issue that is tied into all these systems. Unfortunately, under warranty technicians only get paid three tenths...

Can having your engine seize cause transmission problems too?

If your vehicle has an automatic transmission, the engine drives the transmission through a fluid coupling known as a "torque converter". As a consequence of this design, if the engine were to suddenly stop, the transmission (and differential) would continue...

I have a 02 Toyota Camry 2.4L auto trans that won't shift into 4 & OD

Hi Renee. Thanks for contacting us today. The Shifter Position Switch and Neutral Safety Switch are one in the same, but I don't think that's the source of this type of problem. Typically when that component fails, it causes all...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com