Ford F-250 HD Oil level is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(12)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(12)

Oil level is low Inspection Service

How much does a Oil level is low Inspection cost?

On average, the cost for a Ford F-250 HD Oil level is low Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Ford F-250 HDV8-5.8LService typeOil level is low InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1997 Ford F-250 HDV8-7.3L Turbo DieselService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1997 Ford F-250 HDV8-7.5LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Ford F-250 HD Oil level is low Inspection prices

A vehicle needs oil to run and without it, or too little of it, severe damage can happen to the engine. Engine oil lubricates all of the major moving parts of the engine, which cuts down on wear and tear and dissipates the heat the engine generates. Not having enough oil in a vehicle can be deadly to the car’s engine.

Engine oil operates in a closed loop system so if the engine is losing oil at a significant rate, there is a problem somewhere, most likely a leak.

How this system works:

Engine oil is stored in the oil pan, which holds 4 to 6 quarts of oil depending on the vehicle. When the vehicle engine is started, the oil pump sucks oil from the oil pan through a part called the pickup tube. The oil is then pumped into the oil filter, which removes the dirt and debris that has accumulated in the oil. The engine oil then circulates throughout the engine via spurt holes before heading back to the oil pan where the process starts all over again.

Common reasons for this to happen:

  • Oil Light Comes On: The Low Oil Engine Warning light will illuminate when the oil level gets lower than it should in the oil pan. This warning light varies on vehicles but in most it looks like an oilcan with a droplet coming out of the spout. If this light illuminates for more than a couple of seconds at start-up the car should be inspected immediately as the oil level is too low in the car. This can lead to damage to critical engine components and expensive repairs.

  • Oil Leak: An oil leak can occur in just about any of the oil system components. Common problems are leaking or failing oil pan gaskets. As gaskets and seals age they tend to shrink and fail letting oil escape the system. A leaking gasket can quickly turn into an expensive repair if not addressed, as critical components will not have the lubrication they need to operate safely.

  • Worn Piston Rings: Piston rings help control the oil pressure in the vehicle. If they are worn or damaged the oil levels in the car will drop. Look for white or gray exhaust smoke, slow acceleration and excessive oil consumption. This problem can quickly damage critical and expensive engine components such as the pistons themselves and should be repaired quickly.

  • Faulty Worn Valve Guides: Valve guides are a cylindrical piece of metal that is pressed or cast into the cylinder head. They help to conduct heat away from the combustion process and into the cylinder head where it may be taken up by the cooling system. If valve guide seals are worn, cracked or broken the engine will suck oil down the guides and dump it into the cylinder, which will pull oil from the lubrication system. Oil levels will drop. This problem should be addressed as soon as possible.

  • Incorrect Oil Type: Engines can be filled with low viscosity synthetic oil, which reduces friction and increase fuel efficiency. A lower viscosity oil is thinner and can leak past rings and the seals on valve guides resulting in a loss of oil. Synthetic oil should not be used for the engine break-in period.

  • Assembly Mistakes: Piston rings that are not seated or sealed properly can cause oil to leak out of the engine. This problem can result in significant oil loss. The engine must be rebuilt to correct this problem.

What to expect:

Oil will become black and a bit gritty over time, this is normal and does not indicate that the oil needs to be changed. Most modern oils, especially the synthetics can last between 7,000 and 10,000 miles before they need to be changed.

How it's done:

A mechanic will inspect your car for oil leaks, the oil type and check to see if the oil level warning light is operating as it should. The mechanic will also inspect some related engine components. This will include valve guides, piston rings and more.

How important is this service?

Loss of engine oil is almost always a sign of a more serious problem. Engine oil is literally the lifeblood of the car and if the levels get too low it can damage critical components of the engine. Oil loss or high oil consumption should be investigated as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(12)

Rating Summary
10
1
0
0
1
10
1
0
0
1

Scott

34 years of experience
548 reviews
Scott
34 years of experience
Ford F-250 HD V8-7.5L - Alternator Belt - Arvada, Colorado
On time and quick.

Ajay

9 years of experience
32 reviews
Ajay
9 years of experience
Ford F-250 HD V8-7.3L Turbo Diesel - Door does not lock or open - Raleigh, North Carolina
Ajay P. was great! He assessed the situation and made the repair without flaw,.. During the repair, an issue came up and he was able to troubleshoot the issue and make the correction on site quickly and efficiently. He was very professional and kept me in the loop the entire time. His partner Dylan T. was very helpful as well and the two techs worked great together. I'll call them for all of my future maintenance needs for sure! They're mobile and will come right out to me where ever I'm at! THANKS Again Ajay!!

Patrick

11 years of experience
159 reviews
Patrick
11 years of experience
Ford F-250 HD V8-7.3L Turbo Diesel - Starter - Mesa, Arizona
Patrick seemed very knowledgeable, and was very friendly.

Robert

20 years of experience
1092 reviews
Robert
20 years of experience
Ford F-250 HD V8-7.3L Turbo Diesel - Bleed Brakes - Denver, Colorado
After he left,I took truck for a drive, still felt a little squishy on the peddle, took his advise went to a parking lot and did some break adjusting, I did notice a trail of break fluid for about 20 to 30 feet, I plan on a road test in the morning.

Excellent Rating

(12)

Rating Summary
10
1
0
0
1
10
1
0
0
1
Number of Ford F-250 HD services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

What Prevents the Fuel System From Leaking?
Leaking Leaking fuel is a hazardous and wasteful problem for a vehicle to have. Manufacturers know this, and to combat the problem they have implemented a number of simple ways to prevent fuel from leaking out of the fuel system:...
How to Determine Compression Ratio
Whether Whether you’re building a new engine and you need the metric, or you’re curious to know how efficient your car uses fuel, you have to be able to calculate the engine’s compression ratio. There are a few equations needed...
B1210 OBD-II Trouble Code: EIC Switch-2 Assembly Circuit Open
B1210 means there is an incomplete electrical circuit in the electronic instrument cluster (EIC), likely due to a circuit issue or faulty component.

Some of the time my 2013 Chevrolet Malibu will not start.

Hello. If you are getting a check engine light along with a no start, but there are no codes then you may have a computer issue or a voltage problem. I would need to know if the engine will crank...

I changed my brakes and they still squeak I applied the brake stop squeak and they still squeak

Hi there. The leading cause of brakes squealing after replacing the pads is excessive brake dust trapped between the caliper and the rotor. Typically when brake jobs are completed, a professional mechanic will spray brake cleaner liberally on the calipers...

Car is jerking and then correcting itself while driving. Especially when getting off gas pedal and then when pressing again. Not

Hi there. In general, when this situation occurs, it's due to loose or damaged suspension components as you've described above and indicated were recently replaced. It's quite possible that one of the components has come loose and is the source...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com