Ford F-250 HD Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(12)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(12)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Ford F-250 HD Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Ford F-250 HDV8-7.5LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1997 Ford F-250 HDV8-7.3L Turbo DieselService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1997 Ford F-250 HDV8-5.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Ford F-250 HD Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(12)

Rating Summary
10
1
0
0
1
10
1
0
0
1

Miguel

21 years of experience
232 reviews
Miguel
21 years of experience
Ford F-250 HD V8-5.8L - Car is not starting - New Milford, New Jersey
I had a no start issue with my f-250. I tried all the bases, but Miguel found the problem I suspected. Well see how the repair goes. He was very kind and knowledgeable. Points you in the right direction

Edgar

14 years of experience
38 reviews
Edgar
14 years of experience
Ford F-250 HD V8-5.8L - Distributor - New Milford, New Jersey
He did a great job. On time and got my truck fixed in no time. Highly recommend Edgar .

Scott

34 years of experience
548 reviews
Scott
34 years of experience
Ford F-250 HD V8-7.5L - Alternator Belt - Arvada, Colorado
On time and quick.

Jonathan

22 years of experience
304 reviews
Jonathan
22 years of experience
Ford F-250 HD V8-7.3L Turbo Diesel - Electric Problems - Denver, Colorado
i can leave my key for him and trust he will do what he has to do, he kept me apprised of the problem by text, anxious to get home and see the problem corrected . He is a true blessing to me when i need help with my old cars.

Excellent Rating

(12)

Rating Summary
10
1
0
0
1
10
1
0
0
1
Number of Ford F-250 HD services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

The Guide To Colored Curb Zones in Colorado
Colorado Colorado parking laws: understanding the basics Many drivers in Colorado are well aware of the regulations and laws when they are out driving on the roads. However, they may not be quite as familiar with the laws regarding parking....
B1939 OBD-II Trouble Code: Air Bag Passenger Pressure Switch Circuit Short to Ground
B1939 means there is an issue with the air bag pressure switch on the passenger side, likely due to a malfunction in the switch or module.
How Speeding Tickets Affect Your Car Insurance
A speeding ticket can increase your car insurance rates, especially if you have a history of reckless driving. Drive safely to keep your prices low.

no pulse on injector so not getting any gas

Three things are needed in order for the injector to spray fuel: 12 volts from the ECM fuse, ground from the ECM, and fuel pressure. A simple check to test the injector and fuel pressure is to provide 12v and...

Whining from timing area after water pump was replaced

Noises are often a point of contention in automotive repair. There is a phenomenon we humans all exhibit, mechanics included, where we become ultra sensitive to our cars after they have been worked on. I'm not stating this is what...

My Sentra makes a Knocking sound when I Accelerate or Brake

You probably have one or more motor mounts failing. The motor mounts have a rubber buffer in them to soak up the engine vibrations and when they get tired the engine can shift around a little bit. The one that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com