Ford F-150 Lightning Grease on inner edge of tires Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(19,632)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(19,632)

Grease on inner edge of tires Inspection Service

How much does a Grease on inner edge of tires Inspection cost?

On average, the cost for a Ford F-150 Lightning Grease on inner edge of tires Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 Ford F-150 LightningElectricService typeGrease on inner edge of tires InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
Show example Ford F-150 Lightning Grease on inner edge of tires Inspection prices

Grease is an important protectant for many parts of your car. While it isn’t used in your engine, it is used in several other areas, including the CV joints on your axles, as well as the grease fittings on your suspension (many newer cars have sealed fittings that aren’t serviceable today). It’s also used in rear-wheel drive applications – a truck’s driveshaft may have one or even two grease fittings. However, if you’re noticing grease on the inner edge of your tires, it means that something has potentially gone wrong.

How this system works:

There are a couple of places that grease on the inner edge of your tires might have come from. The most likely is from the CV joint. CV axles, or constant velocity axles, are used in front-wheel drive cars to connect the wheel hubs to the transmission. They have two joints, one close to either end. The joints are made to be flexible, so that your car can travel over bumps and dips easily without losing traction.

The joints are flexible, and include moving parts. To protect them from damage from dust, debris and other threats, they’re covered by rubber “boots” filled with grease. This ensures that they’re constantly lubricated, and that dust and debris cannot enter and damage the joints.

However, over time, your boots wear. The rubber can become brittle from age, and can crack. Boots can also be torn through impact with debris in the road and more. When this happens, the grease can leak out, and dirt and debris can enter the joint.

Common reasons for this to happen:

  • Blown CV Boot: If you’ve noticed grease on the inner edge of your tires, there’s a chance that one of your CV boots has blown and is leaking grease out. This is a serious situation. Without grease, the joint is not properly lubricated. Even more worrying, dirt and debris can enter the CV joint and cause serious damage, requiring the entire joint to be replaced. If the situation is caught early, it’s possible that only the boot will need to be replaced.

  • Damaged Grease Fitting: Some vehicles have grease fittings on their suspension system that enable moving parts to move more easily with lubrication. If one of these is damaged, it’s possible that some of the grease may leak onto the edge of your wheel from a nearby grease fitting.

  • Recent Lubrication of Grease Fittings: Once upon a time, an “oil and lube” service really lived up to its name, with all of a car’s grease fittings being lubricated during normal maintenance. With most newer cars now having sealed systems, this has become less common. However, if your car has serviceable fittings, it’s possible that grease from a recent service somehow ended up on the inner edge of the tire.

  • Recent CV Boot or Axle Replacement: If you’ve already had a CV boot blow out and the axle has been rebooted, or a new CV axle has been installed, it’s possible that the mechanic did not clean off the inner edge of the tire after the repair.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the CV axles, boots, grease fittings and more. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your CV axles and boots, as well as any grease fittings on your front suspension in order to determine the source of the grease on the inner edge of your tires. The mechanic may also need to test drive the vehicle to test for symptoms of a failed CV joint, which include clicking during turning, or a vibration while driving.

How important is this service?

If the problem is with your CV boots, having the situation corrected is critical. While it’s possible to reboot a CV axle before the boot blows entirely, or immediately afterward, any use of the vehicle with the boot blown can contaminate the CV joint with dust and dirt. This will eat into the joint itself, causing irreparable damage and requiring the entire axle to be replaced. If you’ve noticed grease on the inner edge of your tires, one of our professional mechanics can diagnose and repair the condition.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(19,632)

Rating Summary
18,424
649
126
104
329
18,424
649
126
104
329

Larry

16 years of experience
134 reviews
Larry
16 years of experience
Ford Mustang V6-3.8L - Brake Light Switch - Columbus, Ohio
Larry went above and beyond what you would expect from a mechanic. Thank you so much!

Chuck

10 years of experience
375 reviews
Chuck
10 years of experience
Ford Fusion V6-3.0L - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Richardson, Texas
Just had my CV axle replaced and didn't have to drop my car off for a week. Best repair on any of my vehicles quick and easy..

Sergio

10 years of experience
204 reviews
Sergio
10 years of experience
Ford Escape L4-1.6L Turbo - Car is not starting - San Antonio, Texas
Sergio confirmed the appointment and asked to come a bit earlier. He is very friendly, confirms what the problem seems to be and starts his process of confirming the problem. He is knowledgeable and was able to correct the issue and recommended next steps.

Noe

36 years of experience
604 reviews
Noe
36 years of experience
Ford Aspire L4-1.3L - Other Inspections - Federal Way, Washington
Noe did an excellent job! He was quick and explained the problem in detail. The problem was very minor and did not require any replacement parts, so he had helped me save even more! He did an overall inspection of my vehicle as well, and let me know my car is in great shape. It makes me feel safe driving my vehicle! I highly recommend Noe's services!

Excellent Rating

(19,632)

Rating Summary
18,424
649
126
104
329
18,424
649
126
104
329
Number of Ford services completed
215952+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Misfiring Engine?
Repairing a misfiring engine can be simple or complicated, depending on the reason it is misfiring. The most common causes of engine misfires are:...
Disabled Driver Laws and Permits in Utah
In In the State of Utah, the DMV (Division of Motor Vehicles) provides disabled parking plates and placards to people who have disabilities. If you live in Utah, and you are disabled, you may qualify for a special plate or...
P0944 OBD-II Trouble Code: Hydraulic Pressure Unit Loss of Pressure
P0944 is defined as a loss of pressure/“prime” within the transmission’s hydraulic pump often due too failure of the transmission pump or blockages.

Sunroof stuck open

Hi. The sunroof becoming inoperable is a common problem that many R350 owners encounter. The sunroof motors Mercedes produced on these vehicles have been problematic for many owners. They often fail and will need replacement. However, the motor itself is...

transmission

It sounds like you are having a problem with your transmission's shifting mechanisms. Have the shift linkage checked to see if the cable bushings are worn out. A mechanic, like one from YourMechanic, can give your car's transmission an inspection...

My car idles poorly and loses power when I accelerate

Hi There, It sounds like you may have a dirty or failing idle air control valve causing your engine idle to fluctuate and eventually stall. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) is a small valve on the engine's intake system...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com