Ford F-150 Heritage Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(22)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(22)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Ford F-150 Heritage Control Arm Assembly Replacement is $184 with $89 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Ford F-150 HeritageV8-5.4LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1141.59Shop/Dealer Price$1408.24 - $2185.69
2004 Ford F-150 HeritageV8-5.4L TurboService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1121.59Shop/Dealer Price$1388.26 - $2165.72
2004 Ford F-150 HeritageV8-4.6LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1121.59Shop/Dealer Price$1388.26 - $2165.72
2004 Ford F-150 HeritageV6-4.2LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1121.59Shop/Dealer Price$1388.24 - $2165.68
2004 Ford F-150 HeritageV8-5.4L TurboService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1121.59Shop/Dealer Price$1388.27 - $2165.75
2004 Ford F-150 HeritageV8-5.4LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1121.59Shop/Dealer Price$1388.26 - $2165.72
2004 Ford F-150 HeritageV8-5.4LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$354.93Shop/Dealer Price$428.55 - $627.16
2004 Ford F-150 HeritageV8-5.4LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$417.00Shop/Dealer Price$485.86 - $637.08
Show example Ford F-150 Heritage Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(22)

Rating Summary
21
1
0
0
0
21
1
0
0
0

Mazyar

5 years of experience
372 reviews
Mazyar
5 years of experience
F-150 Heritage 2004 - Brake System Flush - Atlanta, GA
Honest, punctual and explained everything in a way that was easy to understand! Thanks again Mazyar!

Mazyar

5 years of experience
372 reviews
Mazyar
5 years of experience
F-150 Heritage 2004 - Emergency / Parking Brake Shoe - Atlanta, GA
Honest, punctual and explained everything in a way that was easy to understand! Thanks again Mazyar!

Mazyar

5 years of experience
372 reviews
Mazyar
5 years of experience
F-150 Heritage 2004 - Clunking or knocking noise from wheels - Atlanta, GA
Mazyar is terrific! He shows up on time and did a great job of diagnosing the service needed on my car. Thanks Mazyar!

Christopher

15 years of experience
286 reviews
Christopher
15 years of experience
F-150 Heritage 2004 - Ball Joint Front - New Port Richey, FL
organized focused

Excellent Rating

(22)

Rating Summary
21
1
0
0
0
21
1
0
0
0
Number of Ford F-150 Heritage services completed
242+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

3 Essential Things to Know About Trailer Hitches
A A trailer hitch is also known as a tow hitch, and is used to pull a vehicle, boat, or other things behind a vehicle. There are different classes of trailer hitches depending on the type of vehicle you have....
How Long Does a Transfer Case Output Shaft Seal Last?
The The transfer case output shaft seal is located on the transfer case of vehicles with four-wheel drive. This transfer case allows you to switch between two-wheel drive, neutral, to, low four-wheel, and drive four-wheel drive. The case consists of...
P2073 OBD-II Trouble Code: Manifold Absolute Pressure/ Mass Air Flow - Throttle Position Correlation at Idle
P2073 P2073 code definition Manifold Absolute Pressure/ Mass Air Flow - Throttle Position Correlation at Idle What the P2073 code means This trouble code indicates that the reference voltages of the manifold absolute pressure, mass air flow, and throttle position...

Battery with white buildup

Yes, you'll need to clean the connections off (https://www.yourmechanic.com/article/how-to-clean-battery-terminal-connections-on-a-car) because it will eventually start to corrode the metal. In order to do this, take your battery terminals off, clean it really well with a wire brush that you can get...

My car has suddenly started wandering when shifting

Hi there: In most cases, the symptoms you're describing are caused by problems with tires, suspension components or the steering rack. When you shift into a different gear during acceleration, the suspension and tires must work together to ensure the...

It wont start

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com