Ford F-150 Heritage Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(26)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(26)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Ford F-150 Heritage Throttle Body Replacement is $445 with $350 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Ford F-150 HeritageV8-4.6LService typeThrottle Body ReplacementEstimate$815.45Shop/Dealer Price$1000.57 - $1533.41
2004 Ford F-150 HeritageV8-5.4L TurboService typeThrottle Body ReplacementEstimate$1265.55Shop/Dealer Price$1568.21 - $2453.64
2004 Ford F-150 HeritageV6-4.2LService typeThrottle Body ReplacementEstimate$795.67Shop/Dealer Price$980.86 - $1513.88
2004 Ford F-150 HeritageV8-5.4LService typeThrottle Body ReplacementEstimate$1265.33Shop/Dealer Price$1567.91 - $2453.16
Show example Ford F-150 Heritage Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(26)

Rating Summary
25
1
0
0
0
25
1
0
0
0

Dan

39 years of experience
975 reviews
Dan
39 years of experience
Ford F-150 Heritage V6-4.2L - Wheel Bearings Replacement (Driver Side Front) - Duluth, Georgia
Great guy 

Joseph

27 years of experience
578 reviews
Joseph
27 years of experience
Ford F-150 Heritage V6-4.2L - Alternator - Houston, Texas
Excellent experience. I would definitely use this service in the future.

Christopher

12 years of experience
36 reviews
Christopher
12 years of experience
Ford F-150 Heritage V6-4.2L - Fuel Pump - Longwood, Florida
Very pleasant guy, got the job done quickly! Would highly recommend~

Howard

30 years of experience
92 reviews
Howard
30 years of experience
Ford F-150 Heritage V8-4.6L - Starter - Lithonia, Georgia
Howard was very helpful

Excellent Rating

(26)

Rating Summary
25
1
0
0
0
25
1
0
0
0
Number of Ford F-150 Heritage services completed
286+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

Are There Upgrades to Stock Car Hoses?
######Barry Blackburn / Shutterstock.com A wide range of hoses are used on your car to carry everything from engine coolant to gasoline and brake fluid. Most stock hoses on your car are made from rubber – it’s...
The Guide to Legal Car Modifications in Michigan
ARENA Creative / Shutterstock.com If you live in Michigan or are planning on moving to the area, you need to know about the vehicle modification laws in the state. Following these modification regulations will help ensure that...
C1101 OBD-II Trouble Code: ABS Hydraulic Valve Circuit Failure
Trouble code C1101 means the engine control unit (ECU) has detected an unspecified failure in the ABS hydraulic valve circuit.

Gas smell from car

Hello, being that you are smelling fuel, this needs to diagnosed and repaired sooner than later, in case its a fuel leak. A fuel leak at the engine can potentially cause a fire. You will need the aid of a...

The turbo is not working at all.

There are a number of things occurring all at once and may all be related to one thing. Unfortunately, that one thing very possibly could be the turbocharger assembly. That said, the best thing to do is have it properly...

The engine is making a ticking noise I would like to what it might be

Ticking or knocking sounds typically come when the engine has been ran low on oil for a period of time or if the engine has had the wrong oil in it. I would recommend checking your oil level (https://www.yourmechanic.com/article/how-to-check-your-engine-oil) to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com