Ford E-350 Econoline Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(96)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(96)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Ford E-350 Econoline Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1979 Ford E-350 EconolineV8-7.5LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1990 Ford E-350 EconolineV8-7.3L DieselService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1983 Ford E-350 EconolineV8-7.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1975 Ford E-350 EconolineV8-7.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1990 Ford E-350 EconolineV8-7.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1979 Ford E-350 EconolineV8-5.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1984 Ford E-350 EconolineV8-5.8LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1983 Ford E-350 EconolineV8-6.9L DieselService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ford E-350 Econoline Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(96)

Rating Summary
89
5
1
0
1
89
5
1
0
1

Oscar

16 years of experience
137 reviews
Oscar
16 years of experience
Ford E-350 Econoline V8-7.5L - Car is not starting - Houston, Texas
Excellent!! Oscar was on time, methodical in his diagnosistic process and found the problem!! I could not be more impressed!

Danny

11 years of experience
269 reviews
Danny
11 years of experience
Ford E-350 Econoline V8-5.8L - Exhaust Gas Recirculation (EGR) Tube - Magnolia, New Jersey
He was very conscientious about everything and very polite. He is a hard worker and a persistent mechanic. I was happy to have him as my mechanic and would recommend him to anyone. If there was more than five stars he would get them. Thanks!!

Blake

13 years of experience
114 reviews
Blake
13 years of experience
Ford E-350 Econoline V8-7.5L - Pre-purchase Car Inspection - Garner, North Carolina
He was attentive and thorough. He looked at things I didn't expect. Helped in making decision to buy.

Raul

34 years of experience
285 reviews
Raul
34 years of experience
Ford E-350 Econoline V8-7.5L - Car is not starting - Berkeley, California
Raul is very kind, he works quickly, and charges a fair rate for such quality work. I'm happy to have him working on my car!

Excellent Rating

(96)

Rating Summary
89
5
1
0
1
89
5
1
0
1
Number of Ford E-350 Econoline services completed
1056+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Universal Joint (U-joint)
The The universal joint is an important part in your car, and it can be found at the end of the vehicle's propshaft. The universal joint, also called a UJ, makes it possible for your rear axle to safely move...
How to Keep Your Family Car Clean and Tidy
Messy kids can get a family car dirty quickly. Make a schedule for organizing and cleaning your car to have a nice car to drive every day.
P0381 OBD-II Trouble Code: Glow Plug/Heater Indicator Circuit Malfunction
Trouble code P0381, also called the "wait to start lamp control circuit," means there's a problem with the glow plug or heater indicator circuit.

Service Engine Light is on

This indicator is part of the onboard diagnostics (OBD-II) system, and in all cases, it indicates a problem with your emissions system. Basically, it is an emissions monitoring system. A Check Engine indictor will stay solid or blink. If the...

Air conditioner blowing warm air. Heat blowing warm air. Neither hot or cold

If the A/C system is full and pressures are reading correctly, and the cooling system is in proper working order (thermostat opens, no overheating, etc.), then most likely the problem lies with the dash. The climate control head unit may...

Does the quote for valve cover gasket replacement include BOTH valve covers or is it for just one side?

Unless you let me know what you were quoted I cannot say what you were quoted. You can have a quote just for one or both gaskets to be replaced. It is cheaper to have both done at the same...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com