Ford E-250 Econoline Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(54)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(54)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a Ford E-250 Econoline Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1984 Ford E-250 EconolineV8-5.0LService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1998 Ford E-250 EconolineV8-5.4LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1983 Ford E-250 EconolineV8-5.0LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1983 Ford E-250 EconolineV8-5.8LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1997 Ford E-250 EconolineV8-5.4LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1981 Ford E-250 EconolineL6-4.9LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1996 Ford E-250 EconolineV8-5.8LService typeCar is not getting enough power InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1982 Ford E-250 EconolineL6-4.9LService typeCar is not getting enough power InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ford E-250 Econoline Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(54)

Rating Summary
44
4
1
0
5
44
4
1
0
5

Diego

21 years of experience
564 reviews
Diego
21 years of experience
Ford E-250 Econoline V8-5.4L - Brakes, Steering and Suspension Inspection - Glendale, Arizona
Very friendly and knowledgeable overall good dude.

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
Ford E-250 Econoline V8-5.4L - AC is not working - Glendale, Arizona
Good dude very friendly seems to know what he knows

Chet

41 years of experience
496 reviews
Chet
41 years of experience
Ford E-250 Econoline V8-5.4L - Car is not starting - Imperial Beach, California
Need further work done. Too soon for a review. He was helpful in determining what to do.

Joe

15 years of experience
453 reviews
Joe
15 years of experience
Ford E-250 Econoline V8-5.4L - Alternator - Franklin, Tennessee
Was nervous and skeptical. Work vehicle is 15 years old. Only need it for a few more months,until new one gets here.Everything went as planned. I was thoroughly impressed. Joe called inform the job was done. I will recommend him and your mechanic. I will be using this service again.

Excellent Rating

(54)

Rating Summary
44
4
1
0
5
44
4
1
0
5
Number of Ford E-250 Econoline services completed
594+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Diagnose a Faulty Water Pump
The water pump (https://www.yourmechanic.com/article/how-to-buy-a-good-quality-water-pump) is a part of your vehicle with an important role in the engine's cooling...
Top 10 Car Hacks
Simplify your life with ten car hacks: charge your phone while you drive, use a tennis ball to park, and prevent dings with pool noodles.
How to Replace a Condenser Fan Relay
A condenser fan relay operates the fan that removes heat from the engine. If faulty, it will not allow the A/C to blow cool air or function at all.

Radiator fan not working when a/c is on.

Your vehicle fan is controlled by two different relays in the engine compartment fuse box. One is for low speed and the other is for high speed. The ECM controls both of the relays. The wires to the cooling fan...

Vibration from passenger side front wheel.

Occasionally, you will be able to measure enough play in the bearing that you can condemn it without further testing. You have to check the factory spec. to see what is allowed and will have to use a dial indicator....

My 2008 Honda accord keeps misfiring on cylinder 2 and i don’t know what to do.

If the plugs are new that is unlikely to be the cause of misfiring. Compression in the No. 2 cylinder should be tested because if you have low compression or a sticking valve in that cylinder, that could cause a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com