Ford C-Max Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(56)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(56)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Ford C-Max Fuel Injector Replacement is $456 with $316 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Ford C-MaxL4-2.0L HybridService typeFuel Injector ReplacementEstimate$1018.50Shop/Dealer Price$1237.98 - $1888.30
2016 Ford C-MaxL4-2.0L HybridService typeFuel Injector ReplacementEstimate$861.89Shop/Dealer Price$1042.70 - $1581.00
2018 Ford C-MaxL4-2.0L HybridService typeFuel Injector ReplacementEstimate$926.12Shop/Dealer Price$1095.30 - $1595.32
2014 Ford C-MaxL4-2.0L HybridService typeFuel Injector ReplacementEstimate$861.89Shop/Dealer Price$1042.72 - $1581.04
2015 Ford C-MaxL4-2.0L HybridService typeFuel Injector ReplacementEstimate$861.89Shop/Dealer Price$1044.20 - $1583.62
2013 Ford C-MaxL4-2.0L HybridService typeFuel Injector ReplacementEstimate$778.59Shop/Dealer Price$938.74 - $1414.69
Show example Ford C-Max Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(56)

Rating Summary
53
3
0
0
0
53
3
0
0
0

David

38 years of experience
39 reviews
David
38 years of experience
Ford C-Max L4-2.0L Hybrid - Battery - Austin, Texas
David was professional, nice, and quick. He figured out how to overcome a few problems quickly to get my car fixed up.

Russell

28 years of experience
271 reviews
Russell
28 years of experience
Ford C-Max L4-2.0L Hybrid - Car Battery Replacement - San Ramon, California
Loved loved the experience and all communication. Russell informed me where he is and asked more questions before he showed up so to make sure he doesn’t need something extra for the appointment. Exchanged my battery, took looks at all other pieces and it was done very very easy. Definitely would hire him again if need it!

Luke

18 years of experience
322 reviews
Luke
18 years of experience
Ford C-Max L4-2.0L Hybrid - Battery - Round Rock, Texas
Pleasant to do business with. Professional and respectful. Will use Luke again when I need a mechanic. Thanks

Nicholas

12 years of experience
691 reviews
Nicholas
12 years of experience
Ford C-Max L4-2.0L Hybrid - Oil Change - Raleigh, North Carolina
Great communication, timely, efficient!

Excellent Rating

(56)

Rating Summary
53
3
0
0
0
53
3
0
0
0
Number of Ford C-Max services completed
616+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

P3443 OBD-11 Trouble Code: Cylinder 6 Deactivation/Intake Valve Control Circuit Low
What What the P3443 code means This code indicates that there is a problem with your intake valve on cylinder number 6. Your vehicle’s control module recognizes that the measured values from the throttle position (TP) sensor, the manifold absolute...
How to Decide on a Car Paint Color
Are Are you repainting an old vehicle? Or are you trying to choose a paint color for your next car? There are a number of factors to consider when choosing a paint color for your car, and if the job...
Symptoms of a Bad or Faulty Door Lock Switch
If the door locks are not functioning well or the door lock button is broken, you may need to replace the door lock switch.

How do I activate the childproof door locks?

Childproof door locks are an invaluable safeguard for parents with kids of all ages. Activating them is also easy. Here’s all you need to do: Open the back door. Locate the lever on the inside edge of the door (close...

Air suspension making a hissing sound

A slight hissing sound that may increase in frequency as the vehicle speed increases may be from the brake lining wear indicator. The noise can start as a slight hiss or scratching noise and turn into a squeal as the...

2015 Toyota Camry LE w/ 21k miles & accident on rear bumper but no structural damage or 2016 Hyundai Sonata Se, 36k miles??

For the long haul, I would lean toward the Japanese, every time. The Japanese car companies have made it their goal to build cars that would make you want to buy another one when the first is worn out. Hyundai...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com