Chevrolet Silverado 2500 HD Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(164)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(164)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Chevrolet Silverado 2500 HD Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Chevrolet Silverado 2500 HDV8-6.0LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2016 Chevrolet Silverado 2500 HDV8-6.6L Turbo DieselService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2013 Chevrolet Silverado 2500 HDV8-6.6L Turbo DieselService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2012 Chevrolet Silverado 2500 HDV8-6.6L Turbo DieselService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2010 Chevrolet Silverado 2500 HDV8-6.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2016 Chevrolet Silverado 2500 HDV8-6.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2018 Chevrolet Silverado 2500 HDV8-6.6L Turbo DieselService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2005 Chevrolet Silverado 2500 HDV8-8.1LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet Silverado 2500 HD Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(164)

Rating Summary
160
3
0
0
1
160
3
0
0
1

Edward

15 years of experience
10 reviews
Edward
15 years of experience
Chevrolet Silverado 2500 HD V8-8.1L - Serpentine/Drive Belt - Manteca, California
My mechanic got the job done under unique circumstances.

Lucas

21 years of experience
887 reviews
Lucas
21 years of experience
Chevrolet Silverado 2500 HD V8-8.1L - Alternator - Santa Monica, California
Start to finish a class act. Thank you

Christopher

27 years of experience
348 reviews
Christopher
27 years of experience
Chevrolet Silverado 2500 HD V8-6.0L - Car AC Compressor Replacement - Tampa, Florida
Great mechanic

Gustavo

17 years of experience
410 reviews
Gustavo
17 years of experience
Chevrolet Silverado 2500 HD V8-6.0L - Exterior Door Handle Replacement (Driver Side Front) - Converse, Texas
Great

Excellent Rating

(164)

Rating Summary
160
3
0
0
1
160
3
0
0
1
Number of Chevrolet Silverado 2500 HD services completed
1804+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

Do You Really Need Premium Gas?
You’re You’re given the choice every time you pull up to the fuel pumps - regular or premium gas (https://www.yourmechanic.com/article/regular-gas-versus-premium-gas-what-s-the-difference-and-should-i-care). You’ve heard all the hype about premium fuel and the benefits it provides: Better fuel efficiency Corrosion prevention Engine knock...
P0607 OBD-II Trouble Code: Control Module Performance
P0607 P0607 code definition The P0607 trouble code marks a performance problem with the control module. This code is often related to the P0602, P0603, P0604, P0605 (https://www.yourmechanic.com/article/p0605-obd-ii-trouble-code-p0605-internal-control-module-rom-error-module-identification-defined-by-sae-j1979-by-blake), and P0606 (https://www.yourmechanic.com/article/p0606-obd-ii-trouble-code-pcm-processor-fault-by-jamahl-walker) trouble codes. What the P0607 code means P0607 is...
P0485 OBD-II Trouble Code: Cooling Fan Power/Ground Circuit Malfunction
Cooling Cooling Fan Power/Ground Circuit Malfunction What the P0485 code means The P0485 code indicates that your cooling fan power is malfunctioning in some way. This could mean that your fan is coming on when your engine is off, or...

If the clutch slave cylinder goes out, is it necessary to replace the clutch as well?

Hi there. From the description you have provided, it would be advisable to replace the clutch assembly at 100,000 miles. In order to replace the clutch slave cylinder in your vehicle, the transmission must be removed. The clutch assembly most...

2005 Liberty V6 cranks but won't start - it also shows various MIL codes

Extended cranking can set the P0522 code for lack of oil pressure. The P0581 code has to do with the cruise control circuit. I wouldn't concern myself with this one until the car is running. It may clear itself at...

Rear shock creaks when turning steering wheel.

If the shock has worn out bushings or the U bracket was overtightened it may be hitting metal to metal and U bracket is rubbing metal of shock. Check bracket and shock bushings.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com