Chevrolet Lumina APV Clunking or knocking noise from wheels Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(18)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(18)

Clunking or knocking noise from wheels Inspection Service

How much does a Clunking or knocking noise from wheels Inspection cost?

On average, the cost for a Chevrolet Lumina APV Clunking or knocking noise from wheels Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Chevrolet Lumina APVV6-3.1LService typeClunking or knocking noise from wheels InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
1995 Chevrolet Lumina APVV6-3.1LService typeClunking or knocking noise from wheels InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1991 Chevrolet Lumina APVV6-3.1LService typeClunking or knocking noise from wheels InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1996 Chevrolet Lumina APVV6-3.4LService typeClunking or knocking noise from wheels InspectionEstimate$104.99Shop/Dealer Price$113.39 - $119.68
1994 Chevrolet Lumina APVV6-3.1LService typeClunking or knocking noise from wheels InspectionEstimate$104.99Shop/Dealer Price$113.42 - $119.75
1992 Chevrolet Lumina APVV6-3.8LService typeClunking or knocking noise from wheels InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1992 Chevrolet Lumina APVV6-3.1LService typeClunking or knocking noise from wheels InspectionEstimate$124.99Shop/Dealer Price$130.87 - $135.28
1993 Chevrolet Lumina APVV6-3.8LService typeClunking or knocking noise from wheels InspectionEstimate$124.99Shop/Dealer Price$131.24 - $135.94
Show example Chevrolet Lumina APV Clunking or knocking noise from wheels Inspection prices

Clunking or knocking noises can be very disconcerting for any driver to hear while they are going down the road. While these noises may be a symptom of some different issues, all are usually related to a suspension component that has failed. When a suspension component has failed, the ride or the vehicle may be altered. If the failed component is not dealt with, it can lead to increasingly difficult and dangerous problems.

How this system works:

Your vehicle’s suspension system is designed to minimize friction between the tires and the road, ensuring a comfortable ride for you and your passengers. Many of the components that may cause a clunking or knocking noise are not only a part of the suspension, but help control the steering of the vehicle. Any issues regarding the steering or suspension of the vehicle should be looked at by a mechanic as they will only become worse over time.

Common reasons for this to happen:

  • Bad Ball Joints: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Depending on the vehicle, one or two ball joints per wheel and may or may not be load bearing. If a ball joint is beginning to fail, you may notice a clunking noise coming from the front wheels. This clunking noise will become louder and more frequent over time. You may also notice that your steering has been affected by the bad ball joint, potentially causing vibration in the steering wheel.

  • Bad Sway Bar Link: A vehicle’s sway bar or anti-roll bar, helps reduce body roll while cornering. Sway bars can help keep a vehicle from rolling over when going around a sharp corner. If the sway bar breaks or is damaged it may produce a clunking or knocking sound, especially when going over bumps. Your vehicle may also had more difficulty handling when the sway bar is damaged.

  • Bad Tie Rods: Tie rods connect a vehicle’s steering rack to the steering arm. This helps translate the turning of the steering wheel to the direction of the tires. When a tie rod end is worn or loose, they may produce a clunking noise. Worn tie rod ends may also cause more play in the steering wheel, making turning more vague.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the clunking or knocking noise from the wheels. The mechanic will then provide a detailed inspection report outlining the reason for the noise and the cost of any repairs that need to be made.

How it's done:

Telling a mechanic about any unusual sensations, in addition to the clunking or knocking noise, you may have observed, will help him or her understand what went wrong with the vehicle.

The mechanic will begin by lifting the front of the vehicle off the ground and shaking the front tires to check for play. If there is play in the front tires, the mechanic will suspect bad ball joints. The mechanic will then remove the wheel and the control arm(s) in order to access the faulty ball joint. He or she will then remove the old ball joint and replace it with a new one. The mechanic should also ensure that the new ball joint is properly lubricated in order to ensure longer life.

If the mechanic suspects that the sway bar has gone bad, the mechanic will begin by examining the sway bar bushings. If the entire sway bar appears to be in tact the bushing may cause the clunking noise. The mechanic will then replace the bushings and the sway bar if necessary.

If the mechanic suspects the tie rods, he or she will examine the tie rods for damage. If the tie rod end had become worn or loose, the mechanic will remove it and replace it with a new one. The mechanic will also ensure after installation, that the new tie rod end is properly lubricated.

In all repairs, the mechanic will make sure after completing the necessary repairs that the car handles properly. He or she should ask to test drive the vehicle to ensure this.

How important is this service?

Suspension and steering components that have gone bad will only get worse over time. If you notice that your car is not handling well or that it has started producing a clunking or knocking noise, you should have it inspected by a mechanic. Issues with suspension and steering components could also lead to other issues, like prematurely worn tires. Being vigilant about repairs to these components can help ensure long-life for your vehicle.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(18)

Rating Summary
18
0
0
0
0
18
0
0
0
0

Andrew

11 years of experience
872 reviews
Andrew
11 years of experience
Chevrolet Lumina APV V6-3.1L - Starter - Shawnee Mission, Kansas
Called when he running behind. Very professional and stuck with a difficult problem until finished. Would I use him again? A definite yes!

Robert

48 years of experience
51 reviews
Robert
48 years of experience
Chevrolet Cobalt L4-2.2L - Clunking or knocking noise from wheels - Austin, Texas
Quick and nice. Right to the point. Checked the entire car.

Rodney

36 years of experience
561 reviews
Rodney
36 years of experience
Chevrolet Equinox V6-3.4L - Clunking or knocking noise from wheels - Sacramento, California
Rodney was extremely professional, friendly and knowledgeable. He arrived on time and was able to provide me great detail in what I needed to do with my vehicle and what was urgent and what could wait a bit longer.

Juan

10 years of experience
216 reviews
Juan
10 years of experience
Chevrolet Silverado 1500 V8-5.3L - Clunking or knocking noise from wheels Inspection - Cypress, California
He was very nolegable in auto experiences.Had a very good public relations .would recommend him for your car services.

Excellent Rating

(18)

Rating Summary
18
0
0
0
0
18
0
0
0
0
Number of Chevrolet Clunking or knocking noise from wheels Inspection services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

Is It Safe to Drive With a BAC Under .08?
You’re You’re having dinner with friends. One glass of wine becomes two. Before you know it, you’ve had more than is probably wise. You’re fine – you know you’re more than capable of driving safely. However, is it really safe...
The Guide to Colored Curb Zones in Arizona
Drivers Drivers in Arizona need to pay close attention to all of the various parking laws to make sure they do not leave their car in an area where it is not allowed. If you park in a prohibited area,...
How to Get Smog Technician Certified in Ohio
Automotive technician jobs include smog certified emissions inspectors. In Ohio, mechanics need ASE Level 1 certification to be an inspector.

What Is an ECU and What Does It Do?

The electronic control unit (ECU) used in today’s cars and trucks is used to control the engine and other components’ functions. An ECU is a computer with internal pre-programmed and programmable computer chips that is not much different from a...

I have a Shogun 3.2 did. The mut scanner from a friend reveals a fault code 35 and says the engine rpm at 3000 and 330 n/m.

Hi there. The fault code 35 reveals that the O2 sensor (https://www.yourmechanic.com/services/oxygen-sensor-replacement) bank one (upstream sensor) has picked up an issue with the emission quality of the exhaust. This means that the engine could be lean or rich in fuel...

No thermostat new water pump still overheating

Running an engine without the thermostat can cause the engine to overheat due to the coolant passes through the engine too fast and will not let the coolant absorb the heat from the engine. If you reinstall a new thermostat...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com