Chevrolet C3500 Distributor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(20)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(20)

Distributor Replacement Service

How much does a Distributor Replacement cost?

On average, the cost for a Chevrolet C3500 Distributor Replacement is $329 with $189 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Chevrolet C3500V8-7.4LService typeDistributor ReplacementEstimate$577.08Shop/Dealer Price$686.20 - $1005.46
2000 Chevrolet C3500V8-7.4LService typeDistributor ReplacementEstimate$524.49Shop/Dealer Price$620.95 - $906.20
1997 Chevrolet C3500V8-7.4LService typeDistributor ReplacementEstimate$539.09Shop/Dealer Price$635.76 - $921.17
1999 Chevrolet C3500V8-7.4LService typeDistributor ReplacementEstimate$524.49Shop/Dealer Price$620.97 - $906.24
Show example Chevrolet C3500 Distributor Replacement prices

What is a distributor and how does it work?

The distributor is an electro-mechanical component installed in a car’s ignition system to provide, time, and “distribute” the spark that occurs at each spark plug in an engine’s combustion cylinders. The distributor contains a rotating shaft with a gear at the bottom that engages a gear on the engine’s camshaft. Atop the shaft is a plastic rotor that has electrical contacts molded in. As the plastic rotor turns, it completes a high voltage circuit to each electrical contact, one per engine cylinder, that is molded into a plastic distributor cap. That high voltage then flows along the spark plug wire to the spark plug, creating the spark that ignites the air-fuel mixture in an engine cylinder.

Distributors vary in design: some may have the ignition coil built in, some have vacuum advance mechanisms attached for engine timing, and really old distributors may even have mechanical points. Vintage cars, that is cars older than 25 years, will more commonly be equipped with a distributor. Most modern car designs have replaced the distributor with fully electronic systems controlled by engine sensors for more precise, and more powerful, ignition system operation.

When to consider replacing the distributor:

  • Worn or damaged integral parts. Worn shaft bushings can result in wobbling or eccentric rotation of the rotor, resulting in misfires, loss of power, rough idle and poor mileage. If the shear pin breaks that secures the distributor shaft drive gear, complete loss of ignition spark distribution is the result. A failed ignition module that is mounted to the distributor housing may also be more cost-performance efficient to replace the entire distributor.
  • Visible oil leaks. Distributors are attached to the engine and consequently, there are seals, both internal and external, that keep oil from leaking at the point of attachment. External O-rings are serviceable but if an internal oil leak occurs, due to a worn shaft, for example, it might necessitate rebuilding or replacing the distributor.

How do mechanics replace the distributor?

Distributors are bolted to the engine block or the cylinder head. The replacement procedure is as follows:

  • Once all diagnostic tests are complete and the distributor is confirmed to be faulty, disconnect the battery negative cable.
  • Set engine at top dead center on the compression stroke for cylinder no. 1. Mark location of distributor housing and shaft relative to the engine mounting surface.
  • Remove primary and secondary ignition system wiring connected to the distributor. Unbolt and remove the distributor. Temporarily cover the hole in the head or block so no foreign matter drops into the engine.
  • Install new distributor and new cap and rotor, with the rotor pointing to the cylinder no. 1 firing-order electrode of the distributor cap. Reconnect all wiring and reconnect battery negative cable.
  • Start engine and set basic engine ignition timing per original equipment manager specification. Then check timing advance for proper function. Road test vehicle.

Is it safe to drive with a distributor problem?

Yes. A faulty distributor will cause increased fuel consumption, increased emissions and poor engine operation but does not generally create a safety hazard.

When replacing a distributor keep in mind:

  • Many ignition system failures will mimic a distributor failure, including faulty spark plugs, faulty wiring, and a worn cap and rotor. Mechanics will always test the distributor directly to ensure it is not needlessly replaced.
  • If a distributor is removed for testing and then re-installed, be sure that new o-rings are installed. Re-using old o-rings often results in oil leaks.
  • If the distributor is replaced, and the spark plugs and spark plug wires have considerable mileage on them, the best results will be obtained by replacing those components at the same time the new distributor is installed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(20)

Rating Summary
18
1
0
0
1
18
1
0
0
1

Brad

16 years of experience
86 reviews
Brad
16 years of experience
Chevrolet C3500 V8-7.4L - Distributor - Colorado Springs, Colorado
Knowledgeable friendly and a hell of a good mechanic thanks Brad for replacing my distributor and rotor and cap your a hell of a good mechanic

Charles

27 years of experience
134 reviews
Charles
27 years of experience
Chevrolet C3500 V8-7.4L - Check Engine Light is on - Renton, Washington
Very Professional and knowledgeable. Would highly recommend Charles.

Gustavo

18 years of experience
575 reviews
Gustavo
18 years of experience
Chevrolet C3500 V8-5.7L - Car is not starting - New Braunfels, Texas
Great job!

Noe

37 years of experience
604 reviews
Noe
37 years of experience
Chevrolet C3500 V8-5.7L - Lubricate Hood Hinge - Seattle, Washington
Noe arriver 5 mins early and quickly diagnosed and solved a problem we had been having for a few months. So knowledgeable and very kind. I hope to work with him again next time I have a mechanical issue.

Excellent Rating

(20)

Rating Summary
18
1
0
0
1
18
1
0
0
1
Number of Chevrolet C3500 services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Subaru Outback
One One of the original sport wagons, the Subaru Outback has enjoyed a high level of popularity over the years, and that doesn’t look like it’s going to change anytime soon. While other manufacturers are trying to create crossover SUVs...
How to Ensure Fuel Injectors Are Receiving the Correct Voltage
Faulty fuel injectors affects fuel economy and can cause a misfire. Make sure your fuel injector receives enough power to work properly.
How to Keep Your Car’s Acrylic Paint Looking Brand New
Acrylic Acrylic paint was extremely popular in older cars, and can still be found on many cars today. While there are many different reasons for manufacturers, auto body specialists, and car owners alike to use acrylic paint, there is one...

How do I lock the doors with the key?

Locking your car doors with your key is very easy. Simply insert the key into the key hole on the driver’s door, and turn the key counterclockwise until you hear the doors lock. This will lock all of the doors,...

Oil pressure light won't turn off

Hello. There could be an oil leak (https://www.yourmechanic.com/services/oil-fluid-leak-inspection) somewhere, or a problem with the car’s oil pump not working properly. It is also possible that the new oil pressure sensor (https://www.yourmechanic.com/services/oil-pressure-sensor-replacement) that you just put in is defective and needs...

Engine shimming problem

Hi. When the engine shims or shakes there could be multiple things causing this problem. The most common cause is the spark plugs (https://www.yourmechanic.com/services/spark-plugs-replacement) and spark wires (https://www.yourmechanic.com/services/ignition-cable-spark-plug-wires-replacement) are bad and causing the car to misfire. A misfiring engine (https://www.yourmechanic.com/services/engine-is-misfiring-inspection)...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com