Buick Regal Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(243)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(243)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Buick Regal Power Steering Pressure Hose Replacement is $205 with $65 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Buick RegalV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$664.32Shop/Dealer Price$721.44 - $867.67
1995 Buick RegalV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$626.61Shop/Dealer Price$675.80 - $810.60
1999 Buick RegalV6-3.8L TurboService typePower Steering Pressure Hose ReplacementEstimate$326.03Shop/Dealer Price$362.50 - $466.50
2016 Buick RegalL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$839.55Shop/Dealer Price$1011.33 - $1522.08
2003 Buick RegalV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$326.03Shop/Dealer Price$364.42 - $469.85
1994 Buick RegalV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$592.89Shop/Dealer Price$634.16 - $744.05
1999 Buick RegalV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$326.03Shop/Dealer Price$362.52 - $466.53
1990 Buick RegalV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$329.81Shop/Dealer Price$377.62 - $516.88
Show example Buick Regal Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(243)

Rating Summary
229
4
2
0
8
229
4
2
0
8

Chris

15 years of experience
82 reviews
Chris
15 years of experience
Buick Regal V6-3.8L - Power Steering Pressure Hose - Oklahoma City, Oklahoma
Chris can fix your car fast and goes the extra mile.

Jimmi

28 years of experience
343 reviews
Jimmi
28 years of experience
Buick Regal L4-2.0L Turbo - Battery - Kissimmee, Florida
Jimmi was on time , was very nice and did a great job on my car !!!!

Joshua

28 years of experience
709 reviews
Joshua
28 years of experience
Buick Regal V6-3.8L - Brakes, Steering and Suspension Inspection - Orinda, California
I really like Josh and have been using him for about a year now. super knowledgeable, honest and professional. Highly recommended.

Brian

25 years of experience
240 reviews
Brian
25 years of experience
Buick Regal V6-3.8L Turbo - Tie Rod End Replacement (Front Left Outer) - Frederick, Maryland
Brian arrived on time, replaced my tie rod end in a timely manner, and even talked to me about what would be needed to get my car through MD inspection and recommended a windshield company to replace the windshield if it doesn’t pass inspection due to a chip in it.

Excellent Rating

(243)

Rating Summary
229
4
2
0
8
229
4
2
0
8
Number of Buick Regal services completed
2673+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

Disabled Driver Laws and Permits in Oregon
Residents Residents of Oregon who are disabled are entitled to obtain parking permits from the DMV in the State of Oregon. You can apply for placards, parking permits, and enjoy other privileges. The laws in the State of Oregon are...
Is it Safe to Drive With the Trunk Open?
The The trunk of your vehicle is the main storage compartment. It is where the luggage, extra vehicle parts, and other important cargo are stored. The trunk is typically located at the opposite end of the engine. If the trunk...
P0515 OBD-II Trouble Code: Battery Temperature Sensor Circuit
P0515 trouble code means there is an issue with the battery temperature sensor circuit often caused by battery corrosion or engine overheating.

My car is running hot...it was smoking from under the hood, after a little bit of cooling, the smoke stopped, but it still smells

I believe you have a bad thermostat (https://www.yourmechanic.com/services/thermostat-replacement). Symptoms of a bad thermostat are coolant boiling over and very tight upper radiator hose. The smell (https://www.yourmechanic.com/services/smell-in-the-car-inspection) is going to be because of the antifreeze on the engine. No worries that...

A bad knocking noise on my left front wheel especially when driving on a bumpy road or when turning either left of right. 2008 VW Golf

Hi there - the suspension noise (https://www.yourmechanic.com/question/suspension-noise) you describe could be either a broken front strut, or strut bearing plate. You are likely also experiencing a bit of loose motion in the steering as well. I would recommend a suspension...

Ok so in Jnauary i ahd my water pump for my 2009 Jaguar XF Supercharged replaced, but the warning light for coolant low still show

P2106 can be caused by many, many faults other than a failed water pump including: general engine overheating, coolant leaks, EGR valve malfunctions, mass air flow sensor malfunctions, drive axle modifications, ABS, Traction Control or Stability Control failures, automatic transmission...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com