BMW ActiveHybrid 5 Spark Plug Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Spark Plug Replacement Service

How much does a Spark Plug Replacement cost?

On average, the cost for a BMW ActiveHybrid 5 Spark Plug Replacement is $286 with $76 for parts and $210 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2016 BMW ActiveHybrid 5L6-3.0L Turbo Hybrid	Service typeSpark Plug Replacement	Estimate$551.10	Shop/Dealer Price$640.20 - $886.24
2014 BMW ActiveHybrid 5L6-3.0L Turbo Hybrid	Service typeSpark Plug Replacement	Estimate$370.55	Shop/Dealer Price$413.25 - $530.53
2013 BMW ActiveHybrid 5L6-3.0L Turbo Hybrid	Service typeSpark Plug Replacement	Estimate$370.55	Shop/Dealer Price$413.32 - $530.65
2012 BMW ActiveHybrid 5L6-3.0L Turbo Hybrid	Service typeSpark Plug Replacement	Estimate$370.55	Shop/Dealer Price$413.31 - $530.64
2015 BMW ActiveHybrid 5L6-3.0L Turbo Hybrid	Service typeSpark Plug Replacement	Estimate$370.55	Shop/Dealer Price$417.18 - $537.41

Show example BMW ActiveHybrid 5 Spark Plug Replacement prices

What are spark plugs and how do they work?

Spark plugs are one of the key components of your vehicle’s ignition system. They ignite gasoline and air inside of your engine. This gives your engine the power to propel you down the road. The spark plug takes high voltage electricity from the ignition coil and creates a spark at just right moment during the engine’s combustion cycle. This gives the engine the best mix of power, fuel economy and low emissions. However, the electrode at the end of the spark plug eventually wears out and can cause performance issues.

Spark plugs-MATROX-1

When should you replace spark plugs?

Replacement should follow the vehicle maintenance schedule. This will be listed in the vehicle’s owner’s manual. Some cars require regular replacement at 30k, 60k or 100k miles. It is possible in some cases that a spark plug might fail before the service schedule, but it’s not typically common.

Avoiding spark plug replacement can cause:

Difficulty starting your car.
Check engine light for a misfire code.
Flashing check engine light during acceleration for misfire, this can cause engine damage.
Reduced fuel economy and/or power.
Rough idle and/or unexplained engine vibration.
Failed State emission testing.

Even if only one spark plug is found to be faulty, they should always be replaced in sets. Most engines will require 4,6, or 8 spark plugs.

How do mechanics replace spark plugs?

Spark plugs are threaded into the engine’s cylinder head(s). Most cars have one plug per cylinder, so a four-cylinder engine will have four plugs, a six-cylinder engine will have six plugs, and so forth. The mechanic will:

Have the correct spark plugs on hand for your vehicle
Pull any diagnostic trouble codes that may be related to worn spark plugs.
Remove the original spark plugs and look at removed spark plugs for any clues indicating engine mis-operation exists; such as oil burning, excessively rich mixture, pre-ignition damage etc. Inform owner of any found unusual conditions.
Install new plugs using a torque wrench.
Finally, a road test of the vehicle to confirm normal operation.

Is it safe to drive with worn spark plugs?

Yes, but spark plugs that are worn enough to cause engine-misfiring have the potential to cause engine damage and overheating of the catalytic converter. Regardless of the age of the plugs, or mileage, if the engine misfires or runs poorly, the plugs should be inspected for defects. Generally, spark plug failure will not keep the engine from running, but in cases of extreme wear, you may experience a limitation in the speed at which you can drive the car. If the maintenance schedule says the plugs should be replaced, it is best to do so promptly.

When having spark plugs replaced keep in mind:

High-speed driving may accelerate spark plug wear. Consider earlier than required inspection and tune-up if you operate the car in severe conditions.
Plugs should always be promptly replaced per the manufacturer maintenance schedule even if they appear to be working perfectly.
If your vehicle is equipped with spark plug wires (as opposed to a coil-on-plug system), the wires should be replaced at the same time. This may increase the cost of your repair.
It is possible that when doing a spark plug replacement, your vehicle may also need additional parts like ignition coils, this will add to the repair cost.
Some engines require that the intake manifold be removed while replacing spark plugs. This may increase the parts and labor cost for the repair.
Leaking valve cover gaskets, which have let oil get in contact with the spark plugs, coils or wires, may be the cause of ignition system issues. Valve cover gaskets will need to be replaced in addition to the spark plugs, wires or coils. This will add to the repair cost.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(3)

Rating Summary

3

0

0

0

0

3

0

0

0

0

SEE REVIEWS NEAR ME

Jeremy

15 years of experience

482 reviews

Jeremy

15 years of experience

by Michelle Kinley

ActiveHybrid 5 2013 - Spark Plugs - Boynton Beach, FL

The experience was actually awesome. Jeremy told me I scheduled a service I didn’t need and was super helpful and FAST! I’m not sure why I would ever schedule elsewhere

Excellent Rating

(3)

Rating Summary

3

0

0

0

0

3

0

0

0

0

SEE REVIEWS NEAR ME

Recent articles & questions

How to Wax Your Car

As As soon as your car leaves the showroom floor, its exterior finish is exposed to a vast array of harmful substances and circumstances. Acid rain, bird droppings, dust and sand, and even sunlight can cause your paint job to...

How Long Does a Transfer Case Output Shaft Seal Last?

The The transfer case output shaft seal is located on the transfer case of vehicles with four-wheel drive. This transfer case allows you to switch between two-wheel drive, neutral, to, low four-wheel, and drive four-wheel drive. The case consists of...

P0788 OBD-II Trouble Code: Shift/Timing Solenoid High

P0788 means that the ECM has detected a high voltage from the timing solenoid valve (TCM) terminal due to low or dirty fluid, or shorted solenoid.

Bluetooth prevents accessing Destination Assist

Hello there, a few different faults can cause the bluetooth system to act up like this. The most common issues include a wiring fault, phone incompatibility, or bluetooth module failure. A qualified technician, such as one from YourMechanic, will be...

I changed the battery in my ford explorer 2013 and the lights and radio work but it won't start. It says to push the brake but it won't work.

Hi there. Check to see if the battery cables are tight. If the cables are tight, then check the brake switch on the brake pedal. It may not be responding to the computer as it could be damaged or shorted....

SRT4 idles fine, but dies when light throttle is applied, no check engine lights, no codes.

Hi Nicholas. Thanks for contacting us today. Although I'm sure your clutch driving skills are great, it's quite possible that the clutch itself is the source of your problem. Most of the time when an engine falls flat while releasing...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com