Audi TT RS Quattro Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,385)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,385)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Audi TT RS Quattro Power Steering Pressure Hose Replacement is $520 with $396 for parts and $123 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Audi TT RS QuattroL5-2.5L TurboService typePower Steering Pressure Hose ReplacementEstimate$941.61Shop/Dealer Price$1152.64 - $1756.48
2012 Audi TT RS QuattroL5-2.5L TurboService typePower Steering Pressure Hose ReplacementEstimate$1027.25Shop/Dealer Price$1266.21 - $1953.80
2013 Audi TT RS QuattroL5-2.5L TurboService typePower Steering Pressure Hose ReplacementEstimate$930.43Shop/Dealer Price$1145.18 - $1760.16
Show example Audi TT RS Quattro Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,385)

Rating Summary
2,214
84
19
12
56
2,214
84
19
12
56

David

27 years of experience
182 reviews
David
27 years of experience
Audi A6 Quattro V6-3.2L - Power Steering Pressure Hose - San Mateo, California
Excellent customer service....he called to update me on his schedule and arrival time. Was flexible with my schedule and stayed well past the designated appt. time to finish the entire job.

Chris

22 years of experience
2223 reviews
Chris
22 years of experience
Audi A4 L4-2.0L Turbo - Check Engine Light is on - Orange, California
Very knowledgable and nice. Deff recommend Chris.

Ricardo

14 years of experience
339 reviews
Ricardo
14 years of experience
Audi A4 Quattro L4-2.0L Turbo - Oil Change - Los Angeles, California
Ricardo was very competent in explaining any issues with the parts and vehicle. He communicated the whole way through and has a very kind spirit

Maxwell

18 years of experience
390 reviews
Maxwell
18 years of experience
Audi S5 V8-4.2L - Check Engine Light is on - Cypress, Texas
Stellar, as always.

Excellent Rating

(2,385)

Rating Summary
2,214
84
19
12
56
2,214
84
19
12
56
Number of Audi services completed
26235+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

Cell Phones and Texting: Distracted Driving Laws in Rhode Island
Texting Texting and driving is illegal in Rhode Island for drivers of all ages and license statuses. Drivers under the age of 18 are prohibited from using a cell phone at any time while driving. Drivers who use a handheld...
The Traveler’s Guide to Driving in Russia
Russia Russia has become a popular destination (https://www.tripadvisor.com/Attractions-g294459-Activities-Russia.html) with travelers. The country has some amazing architecture, museums, history, natural wonders, and more. You can see the Temple of All Religions, the Winter Palace, Hermitage Museum, Lenin’s Mausoleum, Red Square, the...
How to Identify Any Car You See
Have Have you ever looked at a car driving by or parked on the side of the road and thought, “I wonder what that is?” You’re not alone. Most people spend their lives around cars and yet only a small...

Car won't shift into 1st gear.

Hi and thanks for contacting YourMechanic. From what you've described, you'll need to check the adjustment of the cable. The cable may be too short, not letting the transmission engage 1st gear. If you need a diagnosis with your shifting...

Car won't start after fuel pump installation 2004 Subaru WRX/STi Hybrid

If the hard starting issue began immediately after the pump install, a possibility is the fuel delivery (pressure and volume) characteristics of the new pump are far enough off stock (or your just prior pump), that the engine either floods,...

2007 Lexus rx400h oil all over undercarriage

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com