Audi RS3 Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(173)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(173)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Audi RS3 Car Battery Replacement is $390 with $250 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2023 Audi RS3L5-2.5L TurboService typeCar Battery ReplacementEstimate$793.75Shop/Dealer Price$948.25 - $1401.63
2017 Audi RS3L5-2.5L TurboService typeCar Battery ReplacementEstimate$646.35Shop/Dealer Price$773.27 - $1149.92
2022 Audi RS3L5-2.5L TurboService typeCar Battery ReplacementEstimate$782.49Shop/Dealer Price$934.81 - $1386.55
2019 Audi RS3L5-2.5L TurboService typeCar Battery ReplacementEstimate$646.35Shop/Dealer Price$773.30 - $1149.96
2018 Audi RS3L5-2.5L TurboService typeCar Battery ReplacementEstimate$646.35Shop/Dealer Price$774.77 - $1152.54
2024 Audi RS3L5-2.5L TurboService typeCar Battery ReplacementEstimate$782.49Shop/Dealer Price$934.99 - $1386.86
2020 Audi RS3L5-2.5L TurboService typeCar Battery ReplacementEstimate$646.35Shop/Dealer Price$773.31 - $1149.99
Show example Audi RS3 Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(173)

Rating Summary
162
5
3
1
2
162
5
3
1
2

Tinashe

14 years of experience
781 reviews
Tinashe
14 years of experience
Audi A3 L4-2.0L Turbo - Battery - Avondale Estates, Georgia
What a genuinely nice person Tinashe is! Really really solid and talented and I look forward to working with him in the future! Couldn’t be nicer and I felt very comfortable following his advice.

Rigoberto

12 years of experience
739 reviews
Rigoberto
12 years of experience
Audi A4 L4-2.0L Turbo - Battery - Chicago, Illinois
Just a nice & knowledgeable person who knows his cars!

Dameron

18 years of experience
273 reviews
Dameron
18 years of experience
Audi A4 Quattro L4-2.0L Turbo - Car Battery Replacement - Indianapolis, Indiana
Responsive and professional in response to my questions prior to the appointment. Made sure that the part price was reasonable and communicated the price comparisons between two retailers very clearly. Was efficient with his time and answered all my questions during the on site appointment as well. Very satisfied with the overall experience as this was my first time using this service.

Gustavo

18 years of experience
575 reviews
Gustavo
18 years of experience
Audi A4 L4-2.0L Turbo - Battery - Converse, Texas
Second service completed with Gustavos , already booked the third . He’s been able to do more in two service appointments then anyone else had accomplished on my car in the past year! I got to drive my car today for the first time in months !! Very happy with his service and will book his service for all four cars I owe . Thank you !

Excellent Rating

(173)

Rating Summary
162
5
3
1
2
162
5
3
1
2
Number of Audi Car Battery Replacement services completed
1903+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
800+
experts on our platform

Recent articles & questions

How to Replace an Ignition Trigger
The ignition trigger fails if the engine is misfiring or has trouble starting. The check engine light may illuminate if the ignition trigger fails.
How Long Does a Clutch Slave Cylinder Last?
The The clutch slave cylinder is located on the inside or outside of the transmission. If the slave cylinder is mounted on the outside of the transmission, it is normally attached by two bolts. Every time hydraulic pressure is applied,...
P2008 OBD-II Trouble Code: Intake Manifold Runner Control Circuit Open Bank 1
P2008 trouble code definition The P2008 code is a general OBD2 diagnostic trouble code referencing the Intake manifold runner control circuit. This...

Dry grinding/starting noise when in gear

Hi there. Sounds as if the transmission is low on fluid or the transmission is worn and has roller bearings that are damaged. Check the transmission oil level and see if the fluid is low. The fluid should slightly run...

Crankshaft pulley bolt is tight and won't come loose even with impact 2015 Dodge Dart

Hello - the crankshaft damper pulley bolt on many engines is installed with more than 400 ft lbs of torque. This is tough for us mere mortals to deal with. The first task is to install the correct crankshaft locking...

Hello my horn doesn't work but I brought a horn button. Could it pass inspection?

Hi there. As long as the window is able to go up and down regardless of speed and as long as the vehicle has a horn that can operate, then the vehicle is inspection ready for the horn and the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com