Audi Allroad Quattro Brake fluid is leaking Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(16)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(16)

Brake fluid is leaking Inspection Service

How much does a Brake fluid is leaking Inspection cost?

On average, the cost for a Audi Allroad Quattro Brake fluid is leaking Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Audi Allroad QuattroV6-2.7L TurboService typeBrake fluid is leaking InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2005 Audi Allroad QuattroV8-4.2LService typeBrake fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2003 Audi Allroad QuattroV6-2.7L TurboService typeBrake fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2002 Audi Allroad QuattroV6-2.7L TurboService typeBrake fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2003 Audi Allroad QuattroV8-4.2LService typeBrake fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2005 Audi Allroad QuattroV6-2.7L TurboService typeBrake fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2004 Audi Allroad QuattroV6-2.7L TurboService typeBrake fluid is leaking InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2004 Audi Allroad QuattroV8-4.2LService typeBrake fluid is leaking InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Audi Allroad Quattro Brake fluid is leaking Inspection prices

Your brakes are the most important safety system on your vehicle. It’s all too easy to take them for granted, but if they were to fail even once, the results could be catastrophic. Most automotive brake systems are hydraulic, which means that pressurized fluid is sent through the lines from the master cylinder to the calipers and drums in order to activate the pads/shoes and slow down the car. If your brake fluid is leaking, it’s a sign that there’s something seriously wrong.

How this system works:

Your brake system is both simple and complex. There are a number of parts required to make it work properly, but the underlying concept is not that difficult to understand. Your master cylinder is the heart of the system – it is responsible for both boosting brake performance (via the brake booster onto which the master cylinder mounts), and for holding and sending brake fluid through the system.

In a nutshell, your brake system works like this: You press the brake pedal, which activates the master cylinder. It pushes fluid into the lines and down to the calipers. The fluid pressure forces the calipers to close, squeezing the rotor between the brake pads. This creates drag and friction, slowing down the car.

However, if fluid is leaking from somewhere in the system, it could mean that you’ll have insufficient fluid for proper brake operation.

Common reasons for this to happen:

  • Worn Brake Pads: If you suspect fluid is leaking because the level in the reservoir is low, it might be nothing more than worn pads. As the pads wear, more fluid is held in the system (because the caliper piston remains farther out due to the reduced pad material).

  • Damaged Master Cylinder Reservoir: Over time, the plastic reservoir attached to your master cylinder becomes brittle due to heat exposure. It can eventually crack, allowing brake fluid to seep out and down the back of the engine.

  • Damaged Bleeder Valve: Each caliper has a bleeder. These valves allow mechanics to bleed air out of the lines, but they can become damaged (or can be knocked loose or even left loose after inexpert service).

  • Damaged Brake Line: Your car has both rubber and steel brake lines that carry fluid to and from the master cylinder. Both types are prone to wear and can be punctured. If this occurs, fluid will steadily leak out of the line.

  • Failed Wheel Cylinder: On drum brakes, one of the most likely culprits is the wheel seal. These will fail over time and through normal wear and tear, eventually weeping brake fluid.

  • Failed Piston Seal: The piston in your caliper is activated by fluid, and it’s a moving part, which means a seal is necessary to keep the fluid inside while allowing the piston to move. If the seal is damaged (cracked or punctured), it will leak brake fluid.

What to expect:

A professional mobile mechanic will come to your home or office to inspect your brake system, including the master cylinder, brake lines, drums, calipers and other components. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect all aspects of your vehicle’s brake system, including possibly checking trouble codes in the computer if the ABS light is on (set off by the brake fluid level sensor). The mechanic will trace the leak to its origin, and then advise you on the next step required to repair the problem.

How important is this service?

Without an operational brake system, your car cannot be legally or safely driven. Leaking fluid is cause for concern – if the fluid level drops below a certain level, the brakes will not work. It’s essential to have your brake system inspected during normal maintenance, and to pay close attention to the fluid level in the reservoir. Any leaks should be immediately inspected and repaired. One of our professional mechanics can inspect, diagnose and repair your brake fluid leak.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(16)

Rating Summary
15
1
0
0
0
15
1
0
0
0

Carlos

12 years of experience
77 reviews
Carlos
12 years of experience
Audi Allroad Quattro V6-2.7L Turbo - Car is not starting - Whittier, California
Great service, friendly and communicative

Robert

31 years of experience
641 reviews
Robert
31 years of experience
Audi Allroad Quattro V6-2.7L Turbo - Pre-purchase Car Inspection - Menlo Park, California
Robert was great and did a great inspection!

Robert

21 years of experience
64 reviews
Robert
21 years of experience
Audi Allroad Quattro V6-2.7L Turbo - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - Woodinville, Washington
AFTER MANY CANCELED APPOINTMENTS WITH ANOTHER TECH. ROBERT SHOWED UP AND DID A GREAT JOB ON MY CAR,IT WAS DONE IN A GREAT TIME AND I BOOKED A FUTURE APPOINTMENT WITH HIM.

Khoa

20 years of experience
402 reviews
Khoa
20 years of experience
Audi Allroad Quattro V8-4.2L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Menlo Park, California
Khoa showed up early and did a great job on the repair.

Excellent Rating

(16)

Rating Summary
15
1
0
0
0
15
1
0
0
0
Number of Audi Allroad Quattro services completed
176+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Clutch Safety Switch
If your manual car is not starting, starts while in gear, or has the Check Engine Light on, you may need to replace the clutch safety switch.
How to Make Aluminum Wheels Shine
Aluminum Aluminum wheels are an amazing addition to your vehicle to spruce up its appearance. They give your car a sleek, customized look while being relatively low maintenance. Aluminum wheels are desirable in many applications because aluminum is a lightweight...
B1962 OBD-II Trouble Code: Seat Horizontal Forward/Rearward Potentiometer Feedback Circuit Failure
B1962 means there is an error with a power seat potentiometer circuit, likely due to a defective potentiometer or damaged electrical components.

Running lean on bank 2

Hello and thanks for writing in. Code P0174 relates to a lean fuel condition which is typically caused by a faulty mass air flow sensor or potentially a vacuum leak beyond the mass air flow sensor causing the reading of...

2006 ml350 Mercedes SUV, car locked but driver door opens without key present and alarm goes off.

Many door locks are controled by a door lock actuator inside the door. This actuator is connected to metal rods that mechanically activate the lock when the actuator moves electronically. It is possible that one of these metal rods has...

Transmission stuck in reverse won't shift to any other gear what can I do

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com