Audi 200 Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,458)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,458)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a Audi 200 Hazard / Turn Signal Flasher Replacement is $103 with $8 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 Audi 200L5-2.2L TurboService typeHazard / Turn Signal Flasher ReplacementEstimate$130.53Shop/Dealer Price$151.92 - $176.70
1991 Audi 200L5-2.2L TurboService typeHazard / Turn Signal Flasher ReplacementEstimate$110.53Shop/Dealer Price$131.95 - $156.75
1990 Audi 200L5-2.2L TurboService typeHazard / Turn Signal Flasher ReplacementEstimate$110.53Shop/Dealer Price$131.95 - $156.75
Show example Audi 200 Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,458)

Rating Summary
2,279
87
19
12
61
2,279
87
19
12
61

Martin

42 years of experience
90 reviews
Martin
42 years of experience
Audi 200 L5-2.2L Turbo - Car is overheating - San Marcos, Texas
Thank you

Johnny

33 years of experience
296 reviews
Johnny
33 years of experience
Audi 200 L5-2.2L Turbo - Car is not starting - Sacramento, California
Diagnosed problem quickly and professionally.

Jose

37 years of experience
21 reviews
Jose
37 years of experience
Audi A6 V6-3.0L - Power Steering Pump - Windermere, Florida
Jose was informative, helpful and did a great job. Would definitely recommend him in the future.

Shaun

16 years of experience
238 reviews
Shaun
16 years of experience
Audi TT Quattro L4-2.0L Turbo - 75 Point Safety Inspection - San Jose, California
Shaun arrived on time and performed the job carefully.

Excellent Rating

(2,458)

Rating Summary
2,279
87
19
12
61
2,279
87
19
12
61
Number of Audi services completed
27038+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

Customer Service 101 For Car Mechanics
Automotive technician jobs require customer service skills as much as technical skills. Communication and cleanliness are part of great service.
P0788 OBD-II Trouble Code: Shift/Timing Solenoid High
P0788 means that the ECM has detected a high voltage from the timing solenoid valve (TCM) terminal due to low or dirty fluid, or shorted solenoid.
The Future of Car Ownership
What does the future of car ownership look like?

Car won't start after sitting.

As a car sits it is still using the battery so after a few months it is common for the battery to be drained because it hasn't been charged by the alternator. Jump starting it should work to get the...

Brake Pad on passenger side is heating up.

The brake caliper and/or the sliding pins in the caliper bracket, are sticking. Typically, when brakes are refurbished, if the existing calipers have 75,000 or more miles on them, they should be replaced with high quality remanufactured calipers to avoid...

Why is my 1997 Nissan Maxima bogging down and stalling.

Hi there. Though there are a lot of reasons that will cause this most of the time on this vehicle it is due to a failing crank or cam sensor. both are common failures. I usually start by scanning the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com