Volvo V40 Windshield Wiper/Washer System Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(24)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(24)

Windshield Wiper/Washer System Inspection Service

How much does a Windshield Wiper/Washer System Inspection cost?

On average, the cost for a Volvo V40 Windshield Wiper/Washer System Inspection is $115 with $20 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Volvo V40L4-1.9L TurboService typeWindshield Wiper/Washer System InspectionEstimate$190.75Shop/Dealer Price$219.69 - $284.01
2004 Volvo V40L4-1.9L TurboService typeWindshield Wiper/Washer System InspectionEstimate$170.75Shop/Dealer Price$199.71 - $264.04
2003 Volvo V40L4-1.9L TurboService typeWindshield Wiper/Washer System InspectionEstimate$170.75Shop/Dealer Price$199.71 - $264.04
2000 Volvo V40L4-1.9L TurboService typeWindshield Wiper/Washer System InspectionEstimate$134.61Shop/Dealer Price$154.51 - $191.72
2001 Volvo V40L4-1.9L TurboService typeWindshield Wiper/Washer System InspectionEstimate$134.61Shop/Dealer Price$154.55 - $191.79
Show example Volvo V40 Windshield Wiper/Washer System Inspection prices

The windshield wiper and washer system help keep a windshield clean and free of rain, dirt, sleet or snow. This system is not only a convenience but a safety system as well. Limited visibility due to a dirty windshield can make safe driving difficult or impossible.

There are a number of components in the wiper/washer system that can malfunction and cause problems. Everything from a blown fuse to a bad pump can leave a windshield dirty.

How this system works:

Windshield wipers use two different technologies to keep the windshield clean. An electric motor using a worm gear provides the power to move the wipers while a linkage converts the rotational output of the electric motor into the familiar back and forth motion of the wiper blades.

The windshield washer system uses a washer pump that is installed at the base of the washer fluid reservoir. The pump is activated by a spring-loaded switch, this switch turns on the wipers as well. The fluid is pumped through a rubber or plastic hose that runs up to windshield and separates in two lines that feed the washer nozzles on the hood of the car.

Common reasons for this to happen:

Windshield Wiper Issues

  • Worn wiper blades: Wiper blades need to be replaced on a regular basis. Worn wiper blades will not clean the windshield. Smearing or streaking are common symptoms of worn blades. If the blades chatter this can also indicate dirty or worn blades. Torn or cracking blades need to be replaced.

  • Bent or loose wiper arms: Wiper arms can become bent, usually due to vandalism. If the wiper blades are not cleaning the windshield but still appear to be in good shape loose or bent wiper arms could be the problem.

  • Malfunctioning wiper arm linkage: The linkage between the wiper motor and the blades can become damaged. The most common symptom of a broken linkage is one wiper arm not working.

  • Blown fuse: A blown fuse will cut off the electric current to the wiper motor. If both blades fail to function when turned on, a blown fuse is usually the starting point for a diagnosis.

  • Bad wiper motor: If the blades fail to operate at all, are operating slowly, only operate on one speed or do not stop in the correct position a bad or malfunctioning wiper motor could be the culprit. The motor will need to be repaired or replaced.

  • Defective wiper switch: If the wipers do not turn on when the switch is flipped, keep running after being switched off or it is impossible to select the proper speed settings the switch may be defective and will have to be replaced.

Windshield Washer Issues

  • No washer fluid: One of the most common reasons windshield washers fail to work is because the fluid reservoir is empty.

  • Blown fuse: Fuses provide overcurrent protection to all of the vehicle’s electrical units and this includes the windshield washer system. If a fuse blows, the electrical current to the washer pump will be cut off and the washer system will not work.

  • Bad windshield washer switch: The switch that turns on the windshield washer can malfunction and fail to send a signal to the pump. If this happens the pump will not work.

  • Broken washer pump: The electric pump that sends the fluid from the reservoir to the nozzles can malfunction or break.

  • Leaky washer tubes or bottle: The washer reservoir or the tubing that moves the fluid to the nozzles can crack or leak. This can lead to lost fluid on route to the nozzles, which can result in a weak spray or no spray at all.

  • Clogged washer tubes or nozzles: The tubing or the nozzles themselves can become clogged with debris. The nozzles, which are quite small can easily get clogged by dirt, leaves or other debris.

  • Frozen washer fluid: In extremely cold weather it is possible for washer fluid to freeze. If the fluid is frozen it should thaw as the car warms up.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the windshield wiper or washer system issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning windshield wiper or washer system is usually not a life or death situation but it should be addressed as soon as it is convenient. This can become a very real problem if the weather suddenly turns bad as limited visibility can make driving extremely dangerous.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(24)

Rating Summary
21
2
0
0
1
21
2
0
0
1

Peter

36 years of experience
346 reviews
Peter
36 years of experience
Volvo V40 L4-1.9L Turbo - Check Engine Light is on - San Diego, California
First time using this service. Peter showed up on a timely manner and work on my car while I watched. He was very friendly and professional.

Augie

31 years of experience
263 reviews
Augie
31 years of experience
Volvo V40 L4-1.9L Turbo - Spark Plugs - Altadena, California
Augie is friendly, professional and efficient. He explains exactly what he is doing and why. We really appreciate him.

Napoleon

27 years of experience
147 reviews
Napoleon
27 years of experience
Volvo V40 L4-1.9L Turbo - Car is not starting - Glendale, California
Yes, Actually he was early...

Theodore

16 years of experience
1601 reviews
Theodore
16 years of experience
Volvo V40 L4-1.9L Turbo - Engine is shaking, pulsating or vibrating - Seattle, Washington
Another good experience with Theodore

Excellent Rating

(24)

Rating Summary
21
2
0
0
1
21
2
0
0
1
Number of Volvo V40 services completed
264+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

Texas Parking Laws: Understanding the Basics
Driving Driving in Texas requires drivers to pay attention to their surroundings and to the laws of the road. This does not stop just because you are parking your vehicle. In fact, if you park your vehicle incorrectly or in...
P2263 OBD-II Trouble Code: Turbo/Supercharger Boost System Performance
Diagnostic Diagnostic Trouble Code (DTC): P2263 P2263 code definition Turbo/Supercharger Boost System Performance Related Trouble Codes: P0039: Turbo/Supercharger Bypass Valve Ctrl Circ Range/Perf...
How to Replace a Speedometer Cable and Housing on Most Cars
The speedometer cable and housing go bad when the speedometer needle does not work, only works erratically, or there is squealing under the dashboard.

Jeep shutting down below 1,000 RPMs

Your issue could have countless causes, from a vacuum leak to a faulty fuel pump. If the Check Engine Light is on, the first step is to retrieve the associated diagnostic trouble codes (DTCs). These codes serve as a starting...

seatbelt won't release

Hello. I am not aware of any way that you could unlatch the seat belt without damaging it. You may be able to forcibly unlatch the seat belt and have it work properly afterwards, but this is no guarantee. The...

Buying used car and checking for oil burning

Hello, thank you for writing in. Testing for oil burning usually means opening up the engine to see if the pistons and exhaust manifold show signs of oil. You can also check your spark plugs to see if there is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com