Volvo S90 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Volvo S90 Power Steering Pressure Hose Replacement is $416 with $276 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Volvo S90L6-2.9LService typePower Steering Pressure Hose ReplacementEstimate$706.58Shop/Dealer Price$848.08 - $1264.46
1998 Volvo S90L6-2.9LService typePower Steering Pressure Hose ReplacementEstimate$697.57Shop/Dealer Price$837.30 - $1252.36
Show example Volvo S90 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Peter

28 years of experience
86 reviews
Peter
28 years of experience
Volvo S90 L6-2.9L - Check Engine Light is on - Fresno, California
Very happy with his service, very knowledgeable.

Jay

24 years of experience
262 reviews
Jay
24 years of experience
Volvo S90 L4-2.0L Turbo - Brake Pads Replacement (Front) - Buffalo Grove, Illinois
Showed up on time. Answered all my questions. Very professional.

Ibrahim

8 years of experience
76 reviews
Ibrahim
8 years of experience
Volvo S90 L4-2.0L Turbo - Oil Change - Atlanta, Georgia
Quick & simple.

Grzegorz

42 years of experience
473 reviews
Grzegorz
42 years of experience
Volvo S90 L6-2.9L - Oil Change - Daly City, California
Grzegorz was awesome, thorough, and very knowledgeable... He did oil change for my car, took pictures and identify all problems with the car in his 50-point inspection report. Would highly recommend Grzegorz for your next automotive service.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Volvo S90 services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How to Replace a Fog Light Switch on Most Cars
A fog light switch goes bad when the lights do not come or are dim or flickering. A blown fuse may also cause the fog light switch to fail.
How to Clean the Inside of Your Car
Cleaning Cleaning the interior of your car serves several purposes. It can: Increase your car’s value if you are selling it Extend the life of your vinyl or leather components such as the dashboard and seats Improve your satisfaction with...
How to Buy Good Quality Windshield Shades for Parking
Sunlight Sunlight can be incredibly damaging to the interior of your car. UV light can dry out the material of your dashboard over time, leading to cracking and wear. Of course, sunlight also means heat, and the interior of your...

How do I use the Uconnect cancel command?

If you make a mistake while using Uconnect, or change your mind about what you want to be doing, you can use the cancel command. Just press the Uconnect phone button (which is placed on either the steering wheel, or...

How is P0340 and P0328 addressed and how can any of them be affected by overheating

Excessive heat from the vehicle overheating damaged multiple sensors on the vehicle. A Check Engine Light is the only way for your vehicle to communicate that there is a problem. It is great that you have taken initiative in purchasing...

Squeak

Hello. I would first try to determine if the sound you are hearing is engine or suspension related. If the sound seems to come and go according to your engine speed, then the sound is likely engine-related. I would put...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com