Volvo 960 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(19)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Volvo 960 Power Steering Pressure Hose Replacement is $416 with $276 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Volvo 960L6-2.9LService typePower Steering Pressure Hose ReplacementEstimate$706.58Shop/Dealer Price$848.08 - $1264.46
1993 Volvo 960L6-2.9LService typePower Steering Pressure Hose ReplacementEstimate$697.57Shop/Dealer Price$837.30 - $1252.36
1997 Volvo 960L6-2.9LService typePower Steering Pressure Hose ReplacementEstimate$697.57Shop/Dealer Price$837.32 - $1252.40
1996 Volvo 960L6-2.9LService typePower Steering Pressure Hose ReplacementEstimate$697.57Shop/Dealer Price$837.32 - $1252.40
1992 Volvo 960L6-2.9LService typePower Steering Pressure Hose ReplacementEstimate$697.57Shop/Dealer Price$838.80 - $1254.98
1995 Volvo 960L6-2.9LService typePower Steering Pressure Hose ReplacementEstimate$697.57Shop/Dealer Price$837.46 - $1252.65
Show example Volvo 960 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0

H

27 years of experience
828 reviews
H
27 years of experience
Volvo 960 L6-2.9L - Radiator Flush - Saratoga, California
Probably the most helpful mechanic in the bay area

Lucas

30 years of experience
938 reviews
Lucas
30 years of experience
Volvo 960 L6-2.9L - Brake Pads Replacement (Front) - North Hollywood, California
Only mechanic I want to work with.

Richard

22 years of experience
461 reviews
Richard
22 years of experience
Volvo 960 L6-2.9L - Car is not starting - Jonesboro, Georgia
Richard was very professional and knowledgeable. Willing to recommend him to anyone!!!!

Joe

44 years of experience
838 reviews
Joe
44 years of experience
Volvo 960 L6-2.9L - Radiator - Pinellas Park, Florida
Joy was great. Would use him again!!! Thanks for forming this company.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0
Number of Volvo 960 services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How to Get $10 Off YourMechanic.com
Get $10 off YourMechanic services and share $10 coupons with friends with our Give $10, Get $10 Refer-a-Friend program.
Insurance Requirements for Car Registration in Montana
Montana Montana law states that all drivers are required to maintain auto insurance, or “financial responsibility,” in order to legally operate a vehicle. The minimum financial responsibility requirements for Montana drivers are as follows: A minimum of $25,000 per person,...
The Guide To Colored Curb Zones in Kansas
Kansas Kansas parking laws: understanding the basics Kansas drivers are responsible for parking properly and abiding by the laws. They also need to ensure that their vehicle does not become a hazard when it is parked. There are a number...

Stalling at low speeds and idle.

You may have a dirty or failing idle air control valve. The idle air control valve reads the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and at idle. Since...

Fuel line replacement cost

Hi there: Fuel lines these days are typically made of a high-temperature grade polymer or nylon, that is highly resistant to wear and tear vs. the old rubber or plastic lines of yesterday. However, on a 2012 Kia Soul, a...

I need a o2 sensor but i dont know how much it would cost or how many o2 sensors is on my car, i have a 2000 toyota camry v6

Hi Destiny. Thanks for contacting us today. There are a few different O2 sensors on your Toyota, but we need to know a bit more about your car, and the issues you're having to recommend the right inspection. If you...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com