Volvo 740 Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(17)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(17)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Volvo 740 Power Steering Pump Replacement is $364 with $224 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Volvo 740L4-2.3L TurboService typePower Steering Pump ReplacementEstimate$635.76Shop/Dealer Price$759.55 - $1122.82
1990 Volvo 740L4-2.3LService typePower Steering Pump ReplacementEstimate$626.75Shop/Dealer Price$748.77 - $1110.72
1990 Volvo 740L4-2.3L TurboService typePower Steering Pump ReplacementEstimate$626.75Shop/Dealer Price$748.80 - $1110.76
1991 Volvo 740L4-2.3L TurboService typePower Steering Pump ReplacementEstimate$626.75Shop/Dealer Price$748.80 - $1110.76
1992 Volvo 740L4-2.3LService typePower Steering Pump ReplacementEstimate$626.75Shop/Dealer Price$750.27 - $1113.34
1991 Volvo 740L4-2.3LService typePower Steering Pump ReplacementEstimate$626.75Shop/Dealer Price$748.94 - $1111.01
Show example Volvo 740 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(17)

Rating Summary
16
0
0
0
1
16
0
0
0
1

Jay

38 years of experience
1035 reviews
Jay
38 years of experience
Volvo 740 L4-2.3L Turbo - Alternator - Upland, California
Will be sure to ask for him again if I have any other auto issues. Great mechanic and nice person to work with. Knows what he is doing.

Kevin

37 years of experience
53 reviews
Kevin
37 years of experience
Volvo 740 L4-2.3L - Fuel Filter - West Warwick, Rhode Island
He was well equipped with both knowledge and tools, also was informative and polite.Took time and attention not to strip the old bolts.

Richard

22 years of experience
461 reviews
Richard
22 years of experience
Volvo 740 L4-2.3L - Crankshaft Position Sensor Replacement - Marietta, Georgia
Richard was great; honest, friendly, listens well, knowledgeable, systematically diagnosed problems.

Charles

27 years of experience
134 reviews
Charles
27 years of experience
Volvo 740 L4-2.3L - Car is not starting - Seattle, Washington
My car was dead and Charles brought it to life. Very happy with the results.

Excellent Rating

(17)

Rating Summary
16
0
0
0
1
16
0
0
0
1
Number of Volvo 740 services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How to Get Pre-Approved for a Car Loan
Pre-approved car loans make buying a new car easier. Apply for a car loan before you begin car shopping so you can get the best rate and deal.
How to Get an Idaho Driver's Permit
The The state of Idaho requires that all drivers under the age of 18 follow a graduated licensing program that includes a supervised instruction permit. In order to obtain a driver’s permit, there are certain steps that must be followed....
5 Essential Things to Know About Car Insurance
Whether Whether you have a brand new beauty or an older beast, you have to have car insurance if you plan to drive on the road. Before you run out and choose the cheapest option around, there are a few...

Throttle Position Sensor

An engine not starting may be related to many different possibilities, some of which may be related to a lack of spark and some of which may be related to a fuel delivery problem or a combination of both. For...

I filled my car with E85 and now there are multiple misfires.

Hi there. Sometimes E-85 can have several side effects, like the ones you've listed. However, before you start chasing parts, I would highly recommend having a professional mobile mechanic come to your location to complete an engine is misfiring inspection...

2008 jetta 2.5 jerks right before complete stop and jerks again when accelerating from stop

You will need to have the computer tested for codes to see if the throttle sensors are working properly and if the accelerator pedal sensor is working correctly. Once test is done and codes are received then a mechanic like...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com