Volvo 740 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(17)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(17)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Volvo 740 Control Arm Assembly Replacement is $255 with $115 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Volvo 740L4-2.3LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$610.00Shop/Dealer Price$713.29 - $1011.82
1991 Volvo 740L4-2.3LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$597.39Shop/Dealer Price$698.20 - $994.88
1992 Volvo 740L4-2.3LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$538.99Shop/Dealer Price$639.10 - $935.24
1991 Volvo 740L4-2.3LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$435.03Shop/Dealer Price$495.29 - $670.22
1990 Volvo 740L4-2.3LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$597.39Shop/Dealer Price$700.30 - $998.55
1992 Volvo 740L4-2.3LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$597.39Shop/Dealer Price$698.43 - $995.28
1990 Volvo 740L4-2.3L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$538.99Shop/Dealer Price$639.11 - $935.27
1990 Volvo 740L4-2.3LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$597.39Shop/Dealer Price$698.24 - $994.94
Show example Volvo 740 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(17)

Rating Summary
16
0
0
0
1
16
0
0
0
1

Timothy

23 years of experience
107 reviews
Timothy
23 years of experience
Volvo 740 L4-2.3L - Check Cooling System - Seattle, Washington
Good guy really took his time to make sure we diagnosed the problem accurately.

Mauricio

41 years of experience
85 reviews
Mauricio
41 years of experience
Volvo 740 L4-2.3L - Brake Pads Replacement (Front, Rear) - Northridge, California
Awesome service!!! I love the convenience...Mauricio is the best!!! Thank you Sir.

Kevin

37 years of experience
53 reviews
Kevin
37 years of experience
Volvo 740 L4-2.3L - Fuel Filter - West Warwick, Rhode Island
He was well equipped with both knowledge and tools, also was informative and polite.Took time and attention not to strip the old bolts.

Kiri

21 years of experience
372 reviews
Kiri
21 years of experience
Volvo 740 L4-2.3L - Coolant is leaking - Philadelphia, Pennsylvania
Excellent Mechanic. I would definitely use him again when needed.

Excellent Rating

(17)

Rating Summary
16
0
0
0
1
16
0
0
0
1
Number of Volvo 740 services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Power Steering Pump
If you hear squealing noises, the steering wheel feels stiff, or find damage on the power steering belt, have the power steering pump replaced.
How to Change Front Brake Pads
Brake pads are failing when the brakes are noisy, the brake pedal pulsates when pressed, or there is poor brake response when the pedal is pressed.
P0779 OBD-II Trouble Code: Pressure Control Solenoid B Intermittent
P0779 means that the Pressure Control Solenoid B, is receiving intermittent voltage signals due to low or dirty fluid, faulty solenoid, or module.

How Do the Gaskets in the Engine Protect It and Keep It Working?

Gaskets in an engine are used to seal one part to another due to variations from the machining or casting process. When a part is made, the surface will not be perfectly flat. There are small machining lines and surface...

Trouble starting, misfires, dies when you let off the gas.

It sounds like you have a real bad vacuum leak (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-vacuum-leak). After you replaced the radiator and hoses to get it running again check all the vacuum hoses to make sure there is no broke hose. If you find there...

My air conditioner is not working on my 2006 Honda Odyssey, do you think it is the clutch

Hello. It is possible that the clutch or the compressor is bad, but most of the time on this vehicle the primary cause of an air conditioning failure when the system is full is a bad clutch relay. The relay...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com