Volkswagen EuroVan Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(50)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(50)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Volkswagen EuroVan Power Steering Pressure Hose Replacement is $500 with $360 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Volkswagen EuroVanL5-2.5LService typePower Steering Pressure Hose ReplacementEstimate$976.38Shop/Dealer Price$1185.33 - $1804.06
1997 Volkswagen EuroVanV6-2.8LService typePower Steering Pressure Hose ReplacementEstimate$975.31Shop/Dealer Price$1174.07 - $1765.00
1999 Volkswagen EuroVanV6-2.8LService typePower Steering Pressure Hose ReplacementEstimate$1176.53Shop/Dealer Price$1425.63 - $2167.50
1995 Volkswagen EuroVanL5-2.4L DieselService typePower Steering Pressure Hose ReplacementEstimate$866.41Shop/Dealer Price$1048.37 - $1590.08
2002 Volkswagen EuroVanV6-2.8LService typePower Steering Pressure Hose ReplacementEstimate$988.33Shop/Dealer Price$1192.29 - $1794.45
1996 Volkswagen EuroVanL5-2.4L DieselService typePower Steering Pressure Hose ReplacementEstimate$866.41Shop/Dealer Price$1048.51 - $1590.33
1994 Volkswagen EuroVanL5-2.4L DieselService typePower Steering Pressure Hose ReplacementEstimate$866.41Shop/Dealer Price$1048.39 - $1590.11
1995 Volkswagen EuroVanL5-2.5LService typePower Steering Pressure Hose ReplacementEstimate$967.37Shop/Dealer Price$1174.57 - $1792.00
Show example Volkswagen EuroVan Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(50)

Rating Summary
44
2
0
1
3
44
2
0
1
3

Paul

26 years of experience
280 reviews
Paul
26 years of experience
Volkswagen EuroVan L5-2.5L - Car is not starting - Las Vegas, Nevada
Paul arrived on time, was very professional and courteous. He was very knowledgeable and found that our problem was probably just an unstable battery. We will call Paul if we need any future help.

TJ

27 years of experience
362 reviews
TJ
27 years of experience
Volkswagen EuroVan V6-2.8L - Pre-purchase Car Inspection - Sarasota, Florida
Friendly, trustworthy, thorough.

Ronnie

31 years of experience
152 reviews
Ronnie
31 years of experience
Volkswagen EuroVan V6-2.8L - Air Pump - Franklin, Tennessee
Ronnie is a top notch mechanic who cares about the customer. He goes above and beyond to get the job done. Excellent service!

David

28 years of experience
182 reviews
David
28 years of experience
Volkswagen EuroVan L5-2.5L - Inspection / Diagnostics - Pacifica, California
David is super.

Excellent Rating

(50)

Rating Summary
44
2
0
1
3
44
2
0
1
3
Number of Volkswagen EuroVan services completed
550+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

Is It Safe to Drive a Vehicle With a Cracked Windshield?
Your Your car’s windshield is more than just a window to view what’s in front of you - it protects you. Without a windshield, you would be pelted by road debris kicked up by other vehicles, snow and rain, and...
How to Put a Front License Plate Bracket onto a Tesla
While While many cars just have a rear license plate, some states require you have one installed on the front of your vehicle as well. While you could have the front license plate bracket installed at the factory, you can...
Child Seat Safety Laws in West Virginia
In In West Virginia, children in motor vehicles have to be secured using an approved restraint system. This is common sense, and it is the law as well. Given that the main cause of death in children under 12 is...

Vehicle stalling

The most common cause of a vehicle stall would be a vacuum leak or an AC pressure switch. As for the overheating problem, this may or not be related to the stalling issue. If it is related, I would also...

I am having a problem with degraded acceleration/mileage.

I would recommend checking/testing the O2 sensor (https://www.yourmechanic.com/services/oxygen-sensor-replacement) and the MAF (Mass Air Flow) sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement). When either of these two sensors are not working properly, as you may know, they will send inaccurate signals to the ECM which will...

Rhythmic moaning noise that starts at ~30mph and grows in intensity as speed increases - what could it be?

Hey there. This is a common sign of failing wheel bearing(s) (https://www.yourmechanic.com/services/wheel-bearings-replacement). A wheel bearing will usually fail due to pitting or small damage on the surface of the rollers or the bearing race. Both the surface of the rollers...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com