Toyota Cressida Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a Toyota Cressida Hazard / Turn Signal Flasher Replacement is $183 with $88 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1987 Toyota CressidaL6-2.8LService typeHazard / Turn Signal Flasher ReplacementEstimate$321.35Shop/Dealer Price$382.94 - $545.21
1992 Toyota CressidaL6-3.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$270.27Shop/Dealer Price$324.11 - $463.08
1982 Toyota CressidaL6-2.8LService typeHazard / Turn Signal Flasher ReplacementEstimate$306.11Shop/Dealer Price$368.91 - $534.76
1985 Toyota CressidaL6-2.8LService typeHazard / Turn Signal Flasher ReplacementEstimate$301.35Shop/Dealer Price$362.94 - $525.20
1989 Toyota CressidaL6-3.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$270.27Shop/Dealer Price$324.12 - $463.11
1979 Toyota CressidaL6-2.6LService typeHazard / Turn Signal Flasher ReplacementEstimate$306.11Shop/Dealer Price$368.91 - $534.76
1983 Toyota CressidaL6-2.8LService typeHazard / Turn Signal Flasher ReplacementEstimate$311.11Shop/Dealer Price$373.77 - $539.52
1990 Toyota CressidaL6-3.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$275.27Shop/Dealer Price$329.34 - $468.50
Show example Toyota Cressida Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0

Peter

25 years of experience
524 reviews
Peter
25 years of experience
Toyota Cressida L6-2.8L - Pre-purchase Car Inspection - Granada Hills, California
Peter was thorough with his inspection and let me know exactly what was wrong with the car.

Dave

23 years of experience
303 reviews
Dave
23 years of experience
Toyota Cressida L6-2.8L - Starter - Sunnyvale, California
Dave was on time plus very patient. He did a wonderful job! Thanks Dave!

Brian

22 years of experience
7 reviews
Brian
22 years of experience
Toyota Cressida L6-2.8L - Distributor Rotor and Cap - Portland, Oregon
Brian was timely, efficient, and knowledgeable. Thank you!

Peter

25 years of experience
524 reviews
Peter
25 years of experience
Toyota Cressida L6-2.8L - Alternator - Valencia, California
Excellent Job - Peter does great work and knows his stuff

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0
Number of Toyota Cressida services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Register a Car in Utah
Moving Moving to a new area comes with a lot of challenges that you will have to meet head on to avoid getting overwhelmed. Utah is among the most popular states in the country due to the great weather and...
P0973 OBD-II Trouble Code: Shift Solenoid A Control Circuit Low
P0973 means there is an error with the shift solenoid A control circuit due to a faulty solenoid, control circuit,or low or dirty transmission fluid.
P0529 OBD-II Trouble Code: Fan Speed Sensor Circuit Intermittent
P0529 means the cooling fan sent an incorrect voltage signal, caused by open/shorted/corroded wiring, or a damaged fan motor/relay/speed sensor.

Cruise control quit working

Thanks for writing in about your 1998 Chevrolet C1500 Suburban. I would want to diagnose the brake pedal switch (https://www.yourmechanic.com/services/brake-light-switch-replacement) first so I wouldn't replace one that is working fine. A technician using scan tool will easily be able to...

Head gaskets

The majority of the top end of the motor will in fact need to come apart in order to replace head gaskets. However, this would not necessarily be true for replacing only the timing belt.

Feels like it has no power

Generally, the "symptom" you are describing reflects an ignition and/or fuel system issue including all of the many sensors that control these systems. An expert would use any DTC's (diagnostic trouble codes) to hone in on the issue and identify...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com