Toyota 86 Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(57)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(57)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Toyota 86 Brake Master Cylinder Replacement is $507 with $325 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Toyota 86H4-2.0LService typeBrake Master Cylinder ReplacementEstimate$851.48Shop/Dealer Price$1018.66 - $1509.65
2017 Toyota 86H4-2.0LService typeBrake Master Cylinder ReplacementEstimate$1029.55Shop/Dealer Price$1196.82 - $1687.88
Show example Toyota 86 Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(57)

Rating Summary
53
2
0
1
1
53
2
0
1
1

Nazareth

28 years of experience
345 reviews
Nazareth
28 years of experience
Toyota 86 H4-2.0L - Pre-purchase Car Inspection - West Covina, California
Timely, patient, and helpful!

Allen

37 years of experience
471 reviews
Allen
37 years of experience
Toyota Sienna V6-3.0L - Brake Master Cylinder - Deltona, Florida
Allen was very helpful, courteous and transparent regarding the work he had performed. He went above and beyond on getting this job completed. Since the part did not come with a gasket, Allen waited till I got a paper to use for gasket. Allen cut out the shape and installed it. Allen came back to perform gravity flush for all of the brake lines, per my request, since I still felt some issue. After that there has not been any problem. Allen is very knowledgeable at what he does as a mechanic.

Johnny

34 years of experience
392 reviews
Johnny
34 years of experience
Toyota Corolla L4-1.6L - Brake Master Cylinder - Sacramento, California
He was on time and did a great job.

Patrick

34 years of experience
1579 reviews
Patrick
34 years of experience
Toyota Camry L4-2.2L - Brake Master Cylinder - Austin, Texas
Extremely helpful and gave me some advice on cars too. Thank you Patrick!

Excellent Rating

(57)

Rating Summary
53
2
0
1
1
53
2
0
1
1
Number of Toyota Brake Master Cylinder Replacement services completed
627+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

The Risks of a Cheap Oil Change
Quick lube shops promise cheap, fast oil changes; their secret is skimping on low quality oil and unskilled labor.
Symptoms of a Bad or Failing Electronic Spark Control
Common signs include engine performance issues, engine stalling, the car not starting, and the engine not sparking.
P3414 OBD-II Trouble Code: Cylinder 2 Exhaust Valve Control Performance
P3414 means a problem in cylinder 2 with the exhaust valve was detected due to a faulty O2 sensor, bad camshaft timing, or a cracked or loose gas cap.

What does the “Check fuel fill inlet” warning mean in the message center?

The “check fuel fill inlet” warning is an indication of an issue with the fuel cap, which covers the fuel fill inlet. Fuel caps are a vital part of the evaporative emissions (EVAP) system. If the fuel cap is damaged,...

I put glass cleaner in my windshield wiper reservoir. Can I leave it in there or should I flush it out?

Hello - it will be OK to leave the glass cleaner in the windshield washer reservoir. You might want to add a bit of rubbing alcohol to it to prevent freezing during the winter months. (Maybe as much as 1/3...

I have a p0302 already replaced spark plugs and wires and coil pack and fuel injector runs rough at idle but smooths out at 1500

Hi Tyler. Thanks for contacting us today. I think you might find this article very helpful (https://www.yourmechanic.com/article/p0302-obd-ii-trouble-code-cylinder-2-misfire-detected-by-jamahl-walker), as it will explain the source of this error code, possible sources and repair solutions.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com