Suzuki XL-7 Oxygen Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(86)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(86)

Oxygen Sensor Replacement Service

How much does a Oxygen Sensor Replacement cost?

On average, the cost for a Suzuki XL-7 Oxygen Sensor Replacement is $367 with $227 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Suzuki XL-7V6-3.6LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$609.40Shop/Dealer Price$726.60 - $1070.10
2006 Suzuki XL-7V6-2.7LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$1309.91Shop/Dealer Price$1602.72 - $2477.04
2008 Suzuki XL-7V6-3.6LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$815.51Shop/Dealer Price$984.75 - $1488.28
2006 Suzuki XL-7V6-2.7LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$1159.91Shop/Dealer Price$1415.25 - $2177.08
2009 Suzuki XL-7V6-3.6LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$600.39Shop/Dealer Price$717.32 - $1060.62
2002 Suzuki XL-7V6-2.7LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$1309.91Shop/Dealer Price$1602.89 - $2477.33
2005 Suzuki XL-7V6-2.7LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$1309.91Shop/Dealer Price$1602.76 - $2477.11
2009 Suzuki XL-7V6-3.6LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$815.51Shop/Dealer Price$984.75 - $1488.28
Show example Suzuki XL-7 Oxygen Sensor Replacement prices

What is the Oxygen Sensor all about?

With each new model year, manufacturers are adding more oxygen sensors to better manage engine operation. Some high performance engines have an oxygen sensor for each cylinder as well as one for the rear of each catalytic convertor. The sensors are located either underneath the hood or underneath the car. The oxygen sensors are connected (screwed) to the exhaust pipe, either in front or back of the catalytic converter. The front (upstream) sensors measure the amount of oxygen in the exhaust system. The purpose of the front oxygen sensor(s) is to measure how rich or lean the gases are as the gases exit the combustion chamber. Depending upon whether the exhaust gas is lean (high in oxygen content) or rich (low in oxygen content), the amount of fuel entering the engine is adjusted by the engine management computer to try and maintain an ideal mixture that produces the lowest emissions output from the catalytic convertor.

Rear (downstream) sensors are located behind the catalytic converter. The purpose of the rear oxygen sensor(s) is to monitor the oxygen content of the exhaust gases leaving the catalytic convertor.

If one or more of the oxygen sensors are faulty, your car may not pass the emissions test. If you drive your car with a faulty oxygen sensor, you may get poor gas mileage and it can damage the catalytic converter.

Oxygen Sensor-MATROX-1

When replacing the oxygen sensor remember:

  • Many oxygen sensors are damaged by leaking oil or coolant. If that is the case, the cause of that leak needs to be identified and repaired, or else the replacement oxygen sensor will be damaged as well.
  • New vehicles require specific oxygen sensors, and not the universal sensors that were common prior to 1996.

How it's done:

  • Scan the computer in the car for codes.
  • Inspect for vacuum leaks and holes in the exhaust system.
  • Remove and replace the oxygen sensor if it is bad.
  • Check electrical connections.
  • Check for proper operation of oxygen sensors.
  • Clear diagnostic codes.
  • Test drive car.

Our recommendation:

Keep up with the tune-ups. If check engine light is on, don't drive the car too long without getting it inspected. If check engine light is flashing, pull over and get the car towed to avoid costly repairs. Ask the mechanic to inspect the vacuum hoses and leaks in the exhaust system. If the vacuum hose or exhaust system is leaking, it will display an oxygen sensor fault code. Replacing an oxygen sensor may not fix the problem.

What common symptoms indicate you may need to replace the Oxygen Sensor?

  • Check Engine light is on.
  • Car is getting poor gas mileage.
  • Emission test fails.

How important is replacing the oxygen sensor?

Your vehicle has multiple oxygen sensors, and they all help the car run optimally. The front sensors measure how much oxygen is in the exhaust stream to measure how rich or lean the gases leaving the gas chamber are. The rear sensors measure the oxygen content of the gases as they leave the catalytic converter. The oxygen sensors then relay this information to your vehicle’s electronic control unit, so that it can adjust as necessary. Because cars depend on an ideal fuel-to-air ratio to function optimally, the oxygen sensors are leaned on for engine performance. When your oxygen sensors fail your car will run less smoothly, get worse mileage, and have worse emissions.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(86)

Rating Summary
81
3
0
0
2
81
3
0
0
2

Jason

13 years of experience
344 reviews
Jason
13 years of experience
XL-7 2008 - Oxygen Sensor - Arverne, NY
Jason was kind and made sure everything was checked and was a telling me every step...he did a great job.

Stacy

20 years of experience
330 reviews
Stacy
20 years of experience
XL-7 2007 - Starter - Stone Mountain, GA
Stacy was great!

Jonathan

30 years of experience
503 reviews
Jonathan
30 years of experience
XL-7 2005 - Power Steering Pump - Tampa, FL
Johnathan was great the one problem he came to repair once repaired fixed other issues also

Scott

30 years of experience
950 reviews
Scott
30 years of experience
XL-7 2008 - Service Light is on - Paradise Valley, AZ
On time, knowledgeable, courteous

Excellent Rating

(86)

Rating Summary
81
3
0
0
2
81
3
0
0
2
Number of Suzuki XL-7 services completed
946+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

The Most Common Error Codes for Transmission Problems
If your Check Engine Light has come on, there are a number of conditions that could be causing it. Many are related...
What Sensors Make the ABS Work?
When When we are discussing ABS systems it is good to note the year and make of your vehicle because ABS systems have evolved quite a bit over the years, but you also have to know how the ABS system...
Coolant Temperature Sensor Replacement Tips
Learn everything you need to know about how to replace a coolant temperature sensor with this guide from YourMechanic.

Installing a new BCM, 2009 Pontiac G8

According to the factory repair information, a replacement BCM must be programmed using OEM equipment. It states the vehicle will not start and many other functions will not operate properly until programming has taken place. My advice is to have...

Door open/ajar sensor will not turn off .

You may have a worn door latch. With someone in the driver's seat watching the light, close the driver's side door, and push in on the door evenly with the latch to see if the light goes out. If it...

I have a check engine light coming on and off. Scanned code is p0013. CMP solenoid fault. 2008 Pontiac G6

Hello - the P0013 (https://www.yourmechanic.com/article/-p0013-obd-ii-trouble-code-b-camshaft-position-open-or-short-in-oil-control-valve-ocv-bank-1-by-jay-safford) (camshaft position actuator solenoid control circuit) code you have could be caused by several issues. This could be an electrical issue with the wiring to that solenoid itself. There may also be a problem with...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com