Suzuki Vitara Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Suzuki Vitara Wheel Bearings Replacement is $207 with $25 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Suzuki VitaraL4-1.6LService typeWheel Bearings - Driver Side Front ReplacementEstimate$390.56Shop/Dealer Price$442.51 - $587.81
1999 Suzuki VitaraL4-1.6LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$378.85Shop/Dealer Price$428.50 - $572.08
2001 Suzuki VitaraL4-1.6LService typeWheel Bearings - Driver Side Front ReplacementEstimate$238.91Shop/Dealer Price$253.60 - $292.26
1999 Suzuki VitaraL4-2.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$378.85Shop/Dealer Price$428.53 - $572.13
2002 Suzuki VitaraL4-2.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$238.91Shop/Dealer Price$255.52 - $295.61
2004 Suzuki VitaraV6-2.5LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$238.91Shop/Dealer Price$253.78 - $292.57
2003 Suzuki VitaraL4-2.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$238.91Shop/Dealer Price$253.62 - $292.29
2002 Suzuki VitaraL4-1.6LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$346.45Shop/Dealer Price$388.03 - $507.33
Show example Suzuki Vitara Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Chris

21 years of experience
448 reviews
Chris
21 years of experience
Suzuki Vitara L4-2.0L - Banging noises when driving over the bumps - Vancouver, Washington
Awesome, friendly and quick service. Cool guy all around.

David

29 years of experience
142 reviews
David
29 years of experience
Suzuki Vitara L4-1.6L - Battery - San Diego, California
Couldn't ask for a better mechanic. Will recommend his services.

Richard

14 years of experience
601 reviews
Richard
14 years of experience
Suzuki Vitara L4-2.0L - Car is not starting - Las Vegas, Nevada
Was friendly and professional took the time to talk about my car and anything it needed will definitely be calling to fix anything in the future. Thank you

Rodric

15 years of experience
418 reviews
Rodric
15 years of experience
Suzuki Vitara L4-2.0L - Serpentine/Drive Belt - Redlands, California
My experience was very good. The process was smooth and my car is running like a champ now.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Suzuki Vitara services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

How to Replace an Intermittent Wiper Relay
If the windshield wipers function on high and low but do not work on the intermittent setting, then your intermittent wiper relay may be faulty.
The Guide to Right-of-Way Laws
One One of the most important facets of being a safe driver is understanding right-of-way laws. Right-of-way laws are the laws that govern who gets priority of the road, and who gets to go first when two drivers (or a...
The Guide To Colored Curb Zones in Arkansas
The The guide to colored curb zone laws in Arkansas Drivers in Arkansas need to be careful when they are driving on the roadways. They need to pay attention to the other motorists, and they have to obey the laws...

Battery draining

If the shift light comes on in your dash that means the computer has stored a faulty code and needs to be checked. That will probably tell you what is draining the battery. I would recommend having a certified technician...

Good morning, I drove my car for about ten minutes ,found a parking then when I was ready to go again car would not start lathe li

Hi There, If you have power to lights, radio, accessories, etc, but the engine will not turn over or make any sound at all when turning the key, you may have a faulty starter relay. The starter relay (https://www.yourmechanic.com/services/starter-relay-replacement) directs...

clicking noise when turn signal is off

Hi there. If you are hearing a repetitive clicking sound, it is possible that it's coming from the engine compartment. In some cases, this can be caused by a loose serpentine or drive belt or pulley, a timing belt that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com